3 files changed, 5 insertions, 7 deletions
diff --git a/recipes-images/images/files/library/imx6/flash_blk.scr b/recipes-images/images/files/library/imx6/flash_blk.scr
index 48a355f..ec3e00b 100644
--- a/recipes-images/images/files/library/imx6/flash_blk.scr
+++ b/recipes-images/images/files/library/imx6/flash_blk.scr
@@ -4,7 +4,7 @@ setenv uboot_hwpart 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -32,7 +32,7 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
diff --git a/recipes-images/images/files/library/imx6/flash_eth.scr b/recipes-images/images/files/library/imx6/flash_eth.scr
index 281bf5b..77e2ac9 100644
--- a/recipes-images/images/files/library/imx6/flash_eth.scr
+++ b/recipes-images/images/files/library/imx6/flash_eth.scr
@@ -2,7 +2,7 @@ setenv uboot_hwpart 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -30,9 +30,7 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
diff --git a/recipes-images/images/files/library/imx6/update.sh b/recipes-images/images/files/library/imx6/update.sh
index 6781f78..71dda6d 100755
--- a/recipes-images/images/files/library/imx6/update.sh
+++ b/recipes-images/images/files/library/imx6/update.sh
@@ -305,7 +305,7 @@ sudo cp ${BINARIES}/fwd_eth.img "$OUT_DIR/../flash_eth.img"
 sudo cp ${BINARIES}/fwd_mmc.img "$OUT_DIR/../flash_mmc.img"
 
 if [ "$SPLIT" -ge 1 ] ; then
-sudo split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext3-"
+sudo split -a 3 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=100 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext3-"
 fi
 
 #cleanup intermediate files