diff options
Diffstat (limited to 'release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt')
-rw-r--r-- | release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt | 211 |
1 files changed, 0 insertions, 211 deletions
diff --git a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt deleted file mode 100644 index 44cc8d2..0000000 --- a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt +++ /dev/null @@ -1,211 +0,0 @@ -****************************************************** -Release Notes: Embedded Linux BSP V2.x for Apalis TK1 -****************************************************** - -==> For newer images find the release details in the Toradex developer article: -http://developer.toradex.com/software/linux/linux-software/release-details - -Contents: -- U-Boot 2016.11 boot loader -- Linux 3.10.40 kernel, based on NVIDIA's Linux for Tegra (L4T) release R21.5 -- Angstrom 2016.12/OpenEmbedded morty/Yocto 2.2 based root file system, using - LXDE desktop environment - -==> Flashing instructions can be found in the Toradex developer article: -http://developer.toradex.com/knowledge-base/flashing-linux-on-tegra-modules - -Licensing: -- proprietary multimedia codecs included for evaluation purpose only -- customer required to obtain proper re-distribution license - -******************************************************************************** -Linux Image V2.6.1 Beta 2 (November 22, 2016) - -- U-Boot boot loader: - - remove GPIOs used as special function pins - - fix device tree pre-fix in DFU_ALT_EMMC_INFO - - clean-up AS3722 PMIC configuration - - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2# - - configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect - - adjust pin muxing for V1.1 HW - - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2 -- Linux kernel: - - enable UART4 - - fix CL-DVFS and soctherm to unlock full performance - - remove GPIO functionality from DP_HPD and GPIO_PFF2 pins - - optional eDP support requiring DP_HPD_PFF0 pin as optional hot-plug detect - - integrate ADV7280-M, AP1302, OV5640 and TC358743 camera support - - revert introduction of 2 kthreads for camera capture - - configure IPv6 SIT driver as module - - fix PCIe clock and reset not conforming to specification - - fix some mistakes in Tegra124 concerning pin muxing - - add 200 MHz tap hole coefficients for UHS-I tuning on SDMMC1 - - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2# - - adjust pin muxing for V1.1 HW - - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2 - - no longer do card detect polling on V1.1 HW -- Linux user-space: - - add initial asound.state -- OpenEmbedded build system: - - fix buildtime warnings in linux-driver-package - - Qt4 patch which fixes 24-bit colour depth - - QtQuickControls only built if QtBase configured with accessibility - - update toradex-mirrors to V2.6 - -- sources git.toradex.com tag Apalis_TK1_LinuxImageV2.6.1Beta2_20161122 - - repository linux-toradex branch toradex_tk1_l4t_r21.5 - - repository u-boot-toradex branch 2015.04-toradex - -Known Issues: -- License texts do not get deployed to the root file system. - -******************************************************************************** -Linux Image V2.6.1 Beta 1 (September 29, 2016) - -- U-Boot boot loader: - - backport patches needed if compiling with GCC 6 - - add fdt_fixup environment variable as a hook to modify device tree - - fix autoboot not prevented in recovery mode - - add optional PCIe evalboard initialisation -- Linux kernel: - - optimised RAM settings - - allow easy integration of a custom Linux boot logo - - backport patches needed if compiling with GCC 6 -- Linux user-space: - - use HDMI hotplug udev rule as well - - deploy full mesa-demos in favour of segfaulting eglinfo-x11 - - configure LVDS in extended mode by default (#18669) - - add udev rule to start an X output on HDMI hotplug - - disable NVIDIA logo shown exlusively on LVDS - - deploy additional gstreamer components namely for camera, vidconv and JPEG - (#20394) - - update OpenCV4Tegra to 2.4.12.3 - - improve fw_printenv/setenv concerning /etc/fw_env.config -- OpenEmbedded build system: - - split meta-toradex into BSP layers meta-toradex-bsp-common and - meta-toradex-tegra as well as the software layer meta-toradex-demos - - rename the parent directory from stuff to layers - - mv from build/out*/deploy to deploy - - rename TMPDIR from out to tmp - - deploy Qt5 tools into the sdk as part of optional angstrom-qt5-x11-image.bb - - update to watatuki's meta-jetson-tk1 based on L4T R21.5 - -- sources git.toradex.com tag Apalis_TK1_LinuxImageV2.6.1Beta1_20160929 - - repository linux-toradex branch toradex_tk1_l4t_r21.5 - - repository u-boot-toradex branch 2015.04-toradex - -Known Issues: -- power consumption under full load may exceed the carrier boards power budget - see http://developer.toradex.com/products/apalis-tk1#errata for more infos -- License texts do not get deployed to the root file system. - -******************************************************************************** -Linux Image V2.6 Beta 2 (July 1, 2016) - -- U-Boot boot loader: - - first release -- Linux kernel: - - first release -- Linux user-space: - - first release -- OpenEmbedded build system: - - integrate watatuki's meta-jetson-tk1 based on L4T R21.4 - - first release - -- sources git.toradex.com tag Apalis_TK1_LinuxImageV2.6Beta2_20160701 - - repository linux-toradex branch toradex_tk1_l4t_r21.5 - - repository u-boot-toradex branch 2015.04-toradex - -Known Issues: -- power consumption under full load may exceed the carrier boards power budget - see http://developer.toradex.com/products/apalis-tk1#errata for more infos -- if no HDMI screen is connected pcmanfm will consume 100% CPU which can be - worked around by removing '/usr/bin/xrandr --output LVDS-0 --off' line from - /etc/xdg/lxsession/LXDE/autostart -- License texts do not get deployed to the root file system. - -******************************************************************************** -Notes: -- 115200 baud serial debug console on UARTA aka UART1 (EvalBoard lower X28 resp. - X29 depending on JP10/12, X22 on Ixora) without any handshake -- user account: root with empty password -- eMMC: partition 1: vfat with kernel, partition 2 ext3 root file system -- opkg package manager -- HDMI aka DVI-D: not all pixel clock frequencies allow for HDMI audio -- Linux host used for update preparation requires proper 32-bit execution - environment (e.g. install ia32-libs on 64-bit Ubuntu), awk and libusb - (e.g. install gawk and libusb-1.0-0 on Ubuntu) - -Working on latest image: -- U-Boot boot loader - - environment storage in eMMC - - Gigabit Ethernet - - MMC/SD cards - - eMMC flash - - serial console debug UARTA aka UART1 - - Toradex Apalis configuration block handling - - USB storage as host on USB host ports - - USB device firmware upgrade (DFU) and USB mass storage (UMS) as device on - USB OTG1 port -- Linux kernel - - GPIOlib /sys/class/gpio - - temperature sensor /sys/class/hwmon/hwmon{4|5}/temp1_input - - RTC (Tegra internal and PMIC) - - Gigabit Ethernet enpXs0, X being its PCIe bus number - - eMMC ext3 - - serial console debug UARTA aka UART1 ttyS0 - - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 - ttyHSX - - I2C via /dev/i2c-X - - 4-bit MMC card mmc1 (full UHS-I support) - - 4-bit SD card mmc2 (full UHS-I support) - - PWM /sys/class/pwm/pwmchip0 - - HDMI HDA audio hw:1,3 - - analogue audio capture and playback hw:0,0 - - SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev3.0 aka SPI2 - - framebuffer console - - custom Ethernet MAC address - - USB host port - - USB audio driver - - USB webcam - - USB raw HID device /dev/hidrawX - - USB device Ethernet RNDIS, provided by Android gadget - - automatic USB device/host/suspend detection aka full OTG support - - PCIe (regular ports and mini-PCIe slot) - - SATA (regular port or mSATA slot) - - DVFS power management including low-power core migration - - single channel LVDS - - optional eDP - - optional CSI2 camera interface -- Linux user-space - - graphics (HDMI-0 aka DVI-D and LVDS-0) - - tegrastats - - Firefox browser - - Gstreamer 1.0 video encode and playback, independent dual 4K video decode - - LXDE - -Not working or not tested: -- U-Boot boot loader - - U-Boot USB keyboard -- Linux kernel - - RTC (board level I2C RTC) - - HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch - instructions) - - resistive touch - - serial number and board revision - - watchdog - - analogue inputs - - CAN via can0 and can1 - - IrDA - - RS-485 - - SIM card - - suspend - - USB 3.0 host on OTG port -- Linux user-space - - GPIO config tool - -****************************************************************************** -Flashing instruction have been moved to the Toradex developer article: -http://developer.toradex.com/knowledge-base/flashing-linux-on-tegra-modules - -Toradex, April 19, 2017 |