Revert "fdt: Make sure there is no stale initrd left"

This reverts commit 9fe2e4b46458f9c4ec6b8115ebf18b4b26fe6127.

Commit 9fe2e4b46458 ("fdt: Make sure there is no stale initrd left")
introduces a regression in case when U-Boot transfers control to an EFI
app which acts as a subsequent bootloading program. Such an app might
try to set "linux,initrd-start" and "linux,initrd-end" fdt properties,
but by that time those properties are already removed by the code added
in the mentioned commit.

Particularly, the issue was observed on the E850-96 board where GBL EFI
app [1] can't run Android successfully anymore. More specifically, the
kernel can't see the ramdisk and panics with next messages:

    /dev/root: Can't open blockdev
    VFS: Cannot open root device "" or unknown-block(0,0): error -6
    Please append a correct "root=" boot option; ...
    Kernel panic - not syncing: VFS: Unable to mount root fs on
    unknown-block(0,0)

fdt_initrd() function (where initrd dts properties are removed) is
called two times:

1. First it's called by EFI boot manager (e.g. as a part of U-Boot
Standard Boot mechanism) when it's installing FDT:

    fdt_initrd
    image_setup_libfdt
    efi_install_fdt
    efi_bootmgr_run
    efi_mgr_boot

It's already enough for EFI app to malfunction. But then it's also
called second time:

2. From the EFI app, via EFI DT fixup protocol:

    fdt_initrd
    image_setup_libfdt
    efi_dt_fixup
    struct efi_dt_fixup_protocol efi_dt_fixup_prot = {
        .fixup = efi_dt_fixup
    };

See [2] for specific GBL code which sets those fdt properties and then
runs DT fixup protocol callback.

This issue was discussed [3], but no action was taken since then. Revert
this patch for now, until a proper solution can be found.

[1] https://source.android.com/docs/core/architecture/bootloader/generic-bootloader/gbl-dev
[2] https://android.googlesource.com/platform/bootable/libbootloader/+/refs/heads/gbl-mainline/gbl/libgbl/src/android_boot/mod.rs#208
[3] https://lists.denx.de/pipermail/u-boot/2025-July/593879.html

Fixes: 9fe2e4b46458 ("fdt: Make sure there is no stale initrd left")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

1 files changed, 4 insertions, 13 deletions

diff --git a/boot/fdt_support.c b/boot/fdt_support.c
index b7331bb76b3..92f2f534ee0 100644
--- a/boot/fdt_support.c
+++ b/boot/fdt_support.c
@@ -224,24 +224,15 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end)
 	int is_u64;
 	uint64_t addr, size;
 
+	/* just return if the size of initrd is zero */
+	if (initrd_start == initrd_end)
+		return 0;
+
 	/* find or create "/chosen" node. */
 	nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen");
 	if (nodeoffset < 0)
 		return nodeoffset;
 
-	/*
-	 * Although we didn't setup an initrd, there could be a stale
-	 * initrd setting from the previous boot firmware in the live
-	 * device tree. So, make sure there is no setting left if we
-	 * don't want an initrd.
-	 */
-	if (initrd_start == initrd_end) {
-		fdt_delprop(fdt, nodeoffset, "linux,initrd-start");
-		fdt_delprop(fdt, nodeoffset, "linux,initrd-end");
-
-		return 0;
-	}
-
 	total = fdt_num_mem_rsv(fdt);
 
 	/*