Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

Conflicts:
	drivers/mmc/fsl_esdhc.c

Signed-off-by: Tom Rini <trini@ti.com>

10 files changed, 523 insertions, 15 deletions

diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index f60cb0a6de2..8e0e1900038 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -71,6 +71,22 @@ enum srds_prtcl {
 	INTERLAKEN,
 	QSGMII_SW1_A,		/* Indicates ports on L2 Switch */
 	QSGMII_SW1_B,
+	SGMII_2500_FM1_DTSEC1,
+	SGMII_2500_FM1_DTSEC2,
+	SGMII_2500_FM1_DTSEC3,
+	SGMII_2500_FM1_DTSEC4,
+	SGMII_2500_FM1_DTSEC5,
+	SGMII_2500_FM1_DTSEC6,
+	SGMII_2500_FM1_DTSEC9,
+	SGMII_2500_FM1_DTSEC10,
+	SGMII_2500_FM2_DTSEC1,
+	SGMII_2500_FM2_DTSEC2,
+	SGMII_2500_FM2_DTSEC3,
+	SGMII_2500_FM2_DTSEC4,
+	SGMII_2500_FM2_DTSEC5,
+	SGMII_2500_FM2_DTSEC6,
+	SGMII_2500_FM2_DTSEC9,
+	SGMII_2500_FM2_DTSEC10,
 };
 
 enum srds {
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
new file mode 100755
index 00000000000..83060c10f37
--- /dev/null
+++ b/board/freescale/t208xqds/README
@@ -0,0 +1,274 @@
+The T2080QDS is a high-performance computing evaluation, development and
+test platform supporting the T2080 QorIQ Power Architecture processor.
+
+T2080 SoC Overview
+------------------
+The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
+Architecture processor cores with high-performance datapath acceleration
+logic and network and peripheral bus interfaces required for networking,
+telecom/datacom, wireless infrastructure, and mil/aerospace applications.
+
+T2080 includes the following functions and features:
+ - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
+ - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
+ - Hierarchical interconnect fabric
+ - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration
+ - 16 SerDes lanes up to 10.3125 GHz
+ - 8 Ethernet interfaces, supporting combinations of the following:
+   - Up to four 10 Gbps Ethernet MACs
+   - Up to eight 1 Gbps Ethernet MACs
+   - Up to four 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
+   - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 2.0) controllers
+   - Two high-speed USB 2.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
+   - Enhanced serial peripheral interface (eSPI)
+   - Four I2C controllers
+   - Four 2-pin UARTs or two 4-pin UARTs
+   - Integrated Flash Controller supporting NAND and NOR flash
+ - Three eight-channel DMA engines
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ Platform's Trust Architecture 2.0
+
+Differences between T2080 and T2081
+-----------------------------------
+  Feature		T2080	 T2081
+  1G Ethernet numbers:  8	 6
+  10G Ethernet numbers: 4	 2
+  SerDes lanes:		16	 8
+  Serial RapidIO,RMan:  2	 no
+  SATA Controller:	2	 no
+  Aurora:		yes	 no
+  SoC Package:		896-pins 780-pins
+
+
+T2080QDS feature overview
+-------------------------
+Processor:
+ - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
+Memory:
+ - Single memory controller capable of supporting DDR3 and DDR3-LV devices
+ - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
+Ethernet interfaces:
+ - Two 1Gbps RGMII on-board ports
+ - Four 10Gbps XFI on-board cages
+ - 1Gbps/2.5Gbps SGMII Riser card
+ - 10Gbps XAUI Riser card
+Accelerator:
+ - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
+SerDes:
+ - 16 lanes up to 10.3125GHz
+ - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
+IFC:
+ - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
+eSPI:
+ - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
+USB:
+ - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
+PCIE:
+ - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
+SATA:
+ - Two SATA 2.0 ports on-board
+SRIO:
+ - Two Serial RapidIO 2.0 ports up to 5 GHz
+eSDHC:
+ - Supports SD/SDHC/SDXC/eMMC Card
+I2C:
+ - Four I2C controllers.
+UART:
+ - Dual 4-pins UART serial ports
+System Logic:
+ - QIXIS-II FPGA system controll
+Debug Features:
+ - Support Legacy, COP/JTAG, Aurora, Event and EVT
+XFI:
+ - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
+ a on-board SFP+ cages, which to house optical module (fiber cable) or
+ direct attach cable(copper), the copper cable is used to emulate
+ 10GBASE-KR scenario.
+ So, for XFI usage, there are two scenarios, one will use fiber cable,
+ another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
+ introduced to indicate a XFI port will use copper cable, and U-boot
+ will fixup the dtb accordingly.
+ It's used as: fsl_10gkr_copper:<10g_mac_name>
+ The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they
+ do not have to be coexist in hwconfig. If a MAC is listed in the env
+ "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable
+ will be used by default.
+ for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in
+ hwconfig, then both four XFI ports will use copper cable.
+ set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two
+ XFI ports will use copper cable, the other two XFI ports will use fiber
+ cable.
+1000BASE-KX(1G-KX):
+ - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
+ runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
+ in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
+ Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper
+ initialization.
+ Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
+ 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
+ MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1'
+ stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc.
+ For ex. set "fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10" in
+ hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode.
+
+System Memory map
+----------------
+
+Start Address  End Address      Description			Size
+0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD			4KB
+0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash		64KB
+0xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR				16MB
+0xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space		64KB
+0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space		64KB
+0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space		64KB
+0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space		64KB
+0xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal	32MB
+0xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal	32MB
+0xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash			128MB
+0xF_0000_0000  0xF_003F_FFFF    DCSR				4MB
+0xC_4000_0000  0xC_4FFF_FFFF    PCI Express 4 Mem Space		256MB
+0xC_3000_0000  0xC_3FFF_FFFF    PCI Express 3 Mem Space		256MB
+0xC_2000_0000  0xC_2FFF_FFFF    PCI Express 2 Mem Space		256MB
+0xC_0000_0000  0xC_1FFF_FFFF    PCI Express 1 Mem Space		512MB
+0x0_0000_0000  0x0_ffff_ffff    DDR				4GB
+
+
+128M NOR Flash memory Map
+-------------------------
+Start Address   End Address	Definition			Max size
+0xEFF40000	0xEFFFFFFF	u-boot (current bank)		768KB
+0xEFF20000	0xEFF3FFFF	u-boot env (current bank)	128KB
+0xEFF00000	0xEFF1FFFF	FMAN Ucode (current bank)	128KB
+0xED300000	0xEFEFFFFF	rootfs (alt bank)		44MB
+0xEC800000	0xEC8FFFFF	Hardware device tree (alt bank)	1MB
+0xEC020000	0xEC7FFFFF	Linux.uImage (alt bank)		7MB + 875KB
+0xEC000000	0xEC01FFFF	RCW (alt bank)			128KB
+0xEBF40000	0xEBFFFFFF	u-boot (alt bank)		768KB
+0xEBF20000	0xEBF3FFFF	u-boot env (alt bank)		128KB
+0xEBF00000	0xEBF1FFFF	FMAN ucode (alt bank)		128KB
+0xE9300000	0xEBEFFFFF	rootfs (current bank)		44MB
+0xE8800000	0xE88FFFFF	Hardware device tree (cur bank)	1MB
+0xE8020000	0xE86FFFFF	Linux.uImage (current bank)	7MB + 875KB
+0xE8000000	0xE801FFFF	RCW (current bank)		128KB
+
+
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+   a. build NOR boot image
+	$  make T2080QDS_config
+	$  make
+   b. program u-boot.bin image to NOR flash
+	=> tftp 1000000 u-boot.bin
+	=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+	set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
+
+   Switching between default bank0 and alternate bank4 on NOR flash
+   To change boot source to vbank4:
+	by software:   run command 'qixis_reset altbank' in u-boot.
+	by DIP-switch: set SW6[1:4] = '0100'
+
+   To change boot source to vbank0:
+	by software:   run command 'qixis_reset' in u-boot.
+	by DIP-Switch: set SW6[1:4] = '0000'
+
+2. NAND Boot:
+   a. build PBL image for NAND boot
+	$ make T2080QDS_NAND_config
+	$ make
+   b. program u-boot-with-spl-pbl.bin to NAND flash
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> nand erase 0 $filesize
+	=> nand write 1000000 0 $filesize
+	set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
+
+3. SPI Boot:
+   a. build PBL image for SPI boot
+	$ make T2080QDS_SPIFLASH_config
+	$ make
+   b. program u-boot-with-spl-pbl.bin to SPI flash
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> sf probe 0
+	=> sf erase 0 f0000
+	=> sf write 1000000 0 $filesize
+	set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+   a. build PBL image for SD boot
+	$ make T2080QDS_SDCARD_config
+	$ make
+   b. program u-boot-with-spl-pbl.bin to SD/MMC card
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> mmc write 1000000 8 0x800
+	=> tftp 1000000 fsl_fman_ucode_T2080_xx.bin
+	=> mmc write 1000000 0x820 80
+	set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+2-stage NAND/SPI/SD boot loader
+-------------------------------
+PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
+SPL further initializes DDR using SPD and environment variables
+and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to u-boot for futher booting.
+
+SPL has following features:
+ - Executes within 256K
+ - No relocation required
+
+Run time view of SPL framework
+-------------------------------------------------
+|Area		   | Address			|
+-------------------------------------------------
+|SecureBoot header | 0xFFFC0000 (32KB)		|
+-------------------------------------------------
+|GD, BD		   | 0xFFFC8000 (4KB)		|
+-------------------------------------------------
+|ENV		   | 0xFFFC9000 (8KB)		|
+-------------------------------------------------
+|HEAP		   | 0xFFFCB000 (50KB)		|
+-------------------------------------------------
+|STACK		   | 0xFFFD8000 (22KB)		|
+-------------------------------------------------
+|U-boot SPL	   | 0xFFFD8000 (160KB)		|
+-------------------------------------------------
+
+NAND Flash memory Map on T2080QDS
+--------------------------------------------------------------
+Start		End		Definition	Size
+0x000000	0x0FFFFF	u-boot img	1MB  (2 blocks)
+0x100000	0x17FFFF	u-boot env	512KB (1 block)
+0x180000	0x1FFFFF	FMAN ucode	512KB (1 block)
+
+
+Micro SD Card memory Map on T2080QDS
+----------------------------------------------------
+Block		#blocks		Definition	Size
+0x008		2048		u-boot img	1MB
+0x800		0016		u-boot env	8KB
+0x820		0128		FMAN ucode	64KB
+
+
+SPI Flash memory Map on T2080QDS
+----------------------------------------------------
+Start		End		Definition	Size
+0x000000	0x0FFFFF	u-boot img	1MB
+0x100000	0x101FFF	u-boot env	8KB
+0x110000	0x11FFFF	FMAN ucode	64KB
+
+
+How to update the ucode of Freescale FMAN
+-----------------------------------------
+=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin
+=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
+
+
+For more details, please refer to T2080QDS User Guide and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 5879198e4d3..b82e9e75402 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -23,6 +23,7 @@
 #include <phy.h>
 #include <asm/fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
+#include <hwconfig.h>
 #include "../common/qixis.h"
 #include "../common/fman.h"
 #include "t208xqds_qixis.h"
@@ -46,6 +47,15 @@
 #define EMI2		8
 #endif
 
+#define PCCR1_SGMIIA_KX_MASK		0x00008000
+#define PCCR1_SGMIIB_KX_MASK		0x00004000
+#define PCCR1_SGMIIC_KX_MASK		0x00002000
+#define PCCR1_SGMIID_KX_MASK		0x00001000
+#define PCCR1_SGMIIE_KX_MASK		0x00000800
+#define PCCR1_SGMIIF_KX_MASK		0x00000400
+#define PCCR1_SGMIIG_KX_MASK		0x00000200
+#define PCCR1_SGMIIH_KX_MASK		0x00000100
+
 static int mdio_mux[NUM_FM_PORTS];
 
 static const char * const mdio_names[] = {
@@ -187,8 +197,18 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 {
 	int phy;
 	char alias[20];
+	char lane_mode[2][20] = {"1000BASE-KX", "10GBASE-KR"};
+	char buf[32] = "serdes-1,";
 	struct fixed_link f_link;
+	int media_type = 0;
+	int off;
+
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_T2080QDS
+	serdes_corenet_t *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1);
+#endif
 	u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 
@@ -199,9 +219,54 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 		switch (port) {
 #if defined(CONFIG_T2080QDS)
 		case FM1_DTSEC1:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx1");
+				fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio1");
+				sprintf(buf, "%s%s%s", buf, "lane-c,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIIH_KX_MASK);
+				break;
+			}
 		case FM1_DTSEC2:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g2")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx2");
+				fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio2");
+				sprintf(buf, "%s%s%s", buf, "lane-d,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIIG_KX_MASK);
+				break;
+			}
 		case FM1_DTSEC9:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g9")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx9");
+				fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio9");
+				sprintf(buf, "%s%s%s", buf, "lane-a,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIIE_KX_MASK);
+				break;
+			}
 		case FM1_DTSEC10:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g10")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx10");
+				fdt_status_okay_by_alias(fdt,
+							 "1gkx_pcs_mdio10");
+				sprintf(buf, "%s%s%s", buf, "lane-b,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIIF_KX_MASK);
+				break;
+			}
 			if (mdio_mux[port] == EMI1_SLOT2) {
 				sprintf(alias, "phy_sgmii_s2_%x", phy);
 				fdt_set_phy_handle(fdt, compat, addr, alias);
@@ -213,7 +278,29 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 			}
 			break;
 		case FM1_DTSEC5:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g5")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx5");
+				fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio5");
+				sprintf(buf, "%s%s%s", buf, "lane-g,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIIC_KX_MASK);
+				break;
+			}
 		case FM1_DTSEC6:
+			if (hwconfig_sub("fsl_1gkx", "fm1_1g6")) {
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						   "phy_1gkx6");
+				fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio6");
+				sprintf(buf, "%s%s%s", buf, "lane-h,",
+						(char *)lane_mode[0]);
+				out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+					 PCCR1_SGMIID_KX_MASK);
+				break;
+			}
 			if (mdio_mux[port] == EMI1_SLOT1) {
 				sprintf(alias, "phy_sgmii_s1_%x", phy);
 				fdt_set_phy_handle(fdt, compat, addr, alias);
@@ -257,6 +344,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 		default:
 			break;
 		}
+		if (media_type) {
+			/* set property for 1000BASE-KX in dtb */
+			off = fdt_node_offset_by_compat_reg(fdt,
+					"fsl,fman-memac-mdio", addr + 0x1000);
+			fdt_setprop_string(fdt, off, "lane-instance", buf);
+		}
 
 	} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
 		switch (srds_s1) {
@@ -265,15 +358,77 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 		case 0x6c:
 		case 0x6d:
 		case 0x71:
-			f_link.phy_id = port;
-			f_link.duplex = 1;
-			f_link.link_speed = 10000;
-			f_link.pause = 0;
-			f_link.asym_pause = 0;
-			/* no PHY for XFI */
-			fdt_delprop(fdt, offset, "phy-handle");
-			fdt_setprop(fdt, offset, "fixed-link", &f_link,
-				    sizeof(f_link));
+			/*
+			* if the 10G is XFI, check hwconfig to see what is the
+			* media type, there are two types, fiber or copper,
+			* fix the dtb accordingly.
+			*/
+			switch (port) {
+			case FM1_10GEC1:
+			if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) {
+				/* it's MAC9 */
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						"phy_xfi9");
+				fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio9");
+				sprintf(buf, "%s%s%s", buf, "lane-a,",
+						(char *)lane_mode[1]);
+			}
+				break;
+			case FM1_10GEC2:
+			if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) {
+				/* it's MAC10 */
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						"phy_xfi10");
+				fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio10");
+				sprintf(buf, "%s%s%s", buf, "lane-b,",
+						(char *)lane_mode[1]);
+			}
+				break;
+			case FM1_10GEC3:
+			if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g3")) {
+				/* it's MAC1 */
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						"phy_xfi1");
+				fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio1");
+				sprintf(buf, "%s%s%s", buf, "lane-c,",
+						(char *)lane_mode[1]);
+			}
+				break;
+			case FM1_10GEC4:
+			if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g4")) {
+				/* it's MAC2 */
+				media_type = 1;
+				fdt_set_phy_handle(fdt, compat, addr,
+						"phy_xfi2");
+				fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio2");
+				sprintf(buf, "%s%s%s", buf, "lane-d,",
+						(char *)lane_mode[1]);
+			}
+				break;
+			default:
+				return;
+			}
+
+			if (!media_type) {
+				/* fixed-link is used for XFI fiber cable */
+				f_link.phy_id = port;
+				f_link.duplex = 1;
+				f_link.link_speed = 10000;
+				f_link.pause = 0;
+				f_link.asym_pause = 0;
+				fdt_delprop(fdt, offset, "phy-handle");
+				fdt_setprop(fdt, offset, "fixed-link", &f_link,
+					sizeof(f_link));
+			} else {
+				/* set property for copper cable */
+				off = fdt_node_offset_by_compat_reg(fdt,
+					"fsl,fman-memac-mdio", addr + 0x1000);
+				fdt_setprop_string(fdt, off,
+					"lane-instance", buf);
+			}
 			break;
 		default:
 			break;
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index cb46b13cbd3..c55eb28217b 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -618,7 +618,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 #endif
 
 	cfg->cfg.f_min = 400000;
-	cfg->cfg.f_max = min(gd->arch.sdhc_clk, (u32)52000000);
+	cfg->cfg.f_max = min(cfg->sdhc_clk, (u32)52000000);
 
 	cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 218a5ed1750..137886c2f3c 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -39,9 +39,14 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
 	u32 value;
 	struct mii_dev bus;
 	bus.priv = priv->mac->phyregs;
+	bool sgmii_2500 = (priv->enet_if ==
+			PHY_INTERFACE_MODE_SGMII_2500) ? true : false;
+
+	/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
+	value = PHY_SGMII_IF_MODE_SGMII;
+	if (!sgmii_2500)
+		value |= PHY_SGMII_IF_MODE_AN;
 
-	/* SGMII IF mode + AN enable */
-	value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
 	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
 
 	/* Dev ability according to SGMII specification */
@@ -54,7 +59,9 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
 	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
 
 	/* Restart AN */
-	value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
+	value = PHY_SGMII_CR_DEF_VAL;
+	if (!sgmii_2500)
+		value |= PHY_SGMII_CR_RESET_AN;
 	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
 #else
 	struct dtsec *regs = priv->mac->base;
@@ -83,7 +90,8 @@ static void dtsec_init_phy(struct eth_device *dev)
 	out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
 #endif
 
-	if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
+	if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII ||
+	    fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500)
 		dtsec_configure_serdes(fm_eth);
 }
 
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 695e47bf07f..832c10f5c01 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -387,6 +387,11 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1d1f4c0e222..8ed0f7c21af 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -685,6 +685,11 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_HAS_FSL_DR_USB
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_NETDEV		"eth1"
 
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index ba3da06dfb0..6b29add78e6 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -374,6 +374,49 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
+	"netdev=eth0\0"						\
+	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
+	"loadaddr=1000000\0"					\
+	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
+	"tftpflash=tftpboot $loadaddr $uboot; "			\
+		"protect off $ubootaddr +$filesize; "		\
+		"erase $ubootaddr +$filesize; "			\
+		"cp.b $loadaddr $ubootaddr $filesize; "		\
+		"protect on $ubootaddr +$filesize; "		\
+		"cmp.b $loadaddr $ubootaddr $filesize\0"	\
+	"consoledev=ttyS0\0"					\
+	"ramdiskaddr=2000000\0"					\
+	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
+	"fdtaddr=c00000\0"					\
+	"fdtfile=p1023rdb.dtb\0"				\
+	"othbootargs=ramdisk_size=600000\0"			\
+	"bdev=sda1\0"						\
 	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 
+#define CONFIG_HDBOOT					\
+	"setenv bootargs root=/dev/$bdev rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv bootargs root=/dev/nfs rw "				\
+	"nfsroot=$serverip:$rootpath "					\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"			\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv bootargs root=/dev/ram rw "				\
+	"console=$consoledev,$baudrate $othbootargs;"			\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND		CONFIG_RAMBOOTCOMMAND
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index e639e1d57af..48b8dc7fd71 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -533,7 +533,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
 					FTIM1_GPCM_TRAD(0x1f))
 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TCH(0x8) | \
 					FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS3_FTIM3		0x0
 
diff --git a/include/phy.h b/include/phy.h
index b4950776977..d430ed0e32b 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -41,6 +41,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_MII,
 	PHY_INTERFACE_MODE_GMII,
 	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_SGMII_2500,
 	PHY_INTERFACE_MODE_QSGMII,
 	PHY_INTERFACE_MODE_TBI,
 	PHY_INTERFACE_MODE_RMII,
@@ -57,6 +58,7 @@ static const char *phy_interface_strings[] = {
 	[PHY_INTERFACE_MODE_MII]		= "mii",
 	[PHY_INTERFACE_MODE_GMII]		= "gmii",
 	[PHY_INTERFACE_MODE_SGMII]		= "sgmii",
+	[PHY_INTERFACE_MODE_SGMII_2500]		= "sgmii-2500",
 	[PHY_INTERFACE_MODE_QSGMII]		= "qsgmii",
 	[PHY_INTERFACE_MODE_TBI]		= "tbi",
 	[PHY_INTERFACE_MODE_RMII]		= "rmii",