diff options
| author | Adam Ford <aford173@gmail.com> | 2024-03-26 16:24:54 -0500 |
|---|---|---|
| committer | Fabio Estevam <festevam@gmail.com> | 2024-04-05 09:37:12 -0300 |
| commit | 26ff863fc03aaaf4578dc5dc69753385dcf7d810 (patch) | |
| tree | 3df78132b23f3e76924067c5e502c50523f666b9 | |
| parent | a64feb974f6642149aea089efb2ac423d4f2e294 (diff) | |
configs: imx8mp_beacon: Enable PCIe NVMe drives
The baseboard supports and NVMe drives via the PCIe slot. This
requires a few extra config options to be enabled.
The NVMe can be enumerated with the following commands:
u-boot=> pci enum
PCIE-0: Link up (Gen1-x1, Bus0)
u-boot=> nvme scan
u-boot=> nvme info
Device 0: Vendor: 0x15b7 Rev: 20120022 Prod: 184960441105
Type: Hard Disk
Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
u-boot=>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
| -rw-r--r-- | configs/imx8mp_beacon_defconfig | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig index 0ae8c9645a3..fe1678d8ae9 100644 --- a/configs/imx8mp_beacon_defconfig +++ b/configs/imx8mp_beacon_defconfig @@ -15,6 +15,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-beacon-kit" CONFIG_SPL_TEXT_BASE=0x920000 CONFIG_TARGET_IMX8MP_BEACON=y +CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -27,6 +28,7 @@ CONFIG_ARMV8_SET_SMPEN=y CONFIG_ARMV8_EA_EL3_FIRST=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_PCI=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 @@ -65,6 +67,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -118,8 +121,11 @@ CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_IMX=y CONFIG_PHY=y CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y |