diff options
| author | Tom Rini <trini@konsulko.com> | 2024-08-06 09:36:46 -0600 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2024-08-06 09:36:46 -0600 |
| commit | b7d5ce05b1b52136af09cf34541c6a91079a4b86 (patch) | |
| tree | cd030b59b9e5ab58e4decad781c526c2b4b8112d | |
| parent | 784c70c04012b86edb5a903d3a6e7958267a7ea5 (diff) | |
| parent | 541a1649e74787682902d820d0b79e16bad69a4f (diff) | |
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
This updates the "old style" DTs to that of Linux v6.10, matching what
OF_UPSTREAM is at now. Hopefully we won't need to do this (manually)
anymore. Since this brings in the DT for a new board (Tanix TX1), also
add the defconfig for that, which has just been waiting for that sync.
There are three more fixes: two for the SPI clock setup, which avoids
too high frequencies in some cases, and one fix to avoid a build warning
with GCC 14 for the sunxi TOC0 part of the mkimage tool.
The gitlab CI passed, and I tested the SPI flash on the OrangePi Zero 3
and also booted that into Linux.
89 files changed, 939 insertions, 136 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 82d37adae3f..871cfbbebab 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -678,6 +678,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-tanix-tx6.dtb \ sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ + sun50i-h313-tanix-tx1.dtb \ sun50i-h616-orangepi-zero2.dtb \ sun50i-h618-orangepi-zero2w.dtb \ sun50i-h618-orangepi-zero3.dtb \ diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts index bf66b640816..92bc4e7864e 100644 --- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts @@ -53,7 +53,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts index ffc3b4c7068..69dfe3bc4d8 100644 --- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts +++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts @@ -41,7 +41,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts index 22d350249c1..75217668382 100644 --- a/arch/arm/dts/sun50i-a64-olinuxino.dts +++ b/arch/arm/dts/sun50i-a64-olinuxino.dts @@ -52,7 +52,7 @@ status = "okay"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index 714a270a558..a037e15ab9d 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -68,7 +68,7 @@ status = "okay"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts index 576eae13223..1a85d5f60c3 100644 --- a/arch/arm/dts/sun50i-a64-pinebook.dts +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -79,7 +79,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi index b25e7913f55..c62dc937def 100644 --- a/arch/arm/dts/sun50i-a64-pinephone.dtsi +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -39,25 +39,35 @@ leds { compatible = "gpio-leds"; - led-0 { + led0: led-0 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_BLUE>; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + retain-state-suspended; }; - led-1 { + led1: led-1 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ + retain-state-suspended; }; - led-2 { + led2: led-2 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ + retain-state-suspended; }; }; + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + leds = <&led0>, <&led1>, <&led2>; + }; + reg_ps: ps-regulator { compatible = "regulator-fixed"; regulator-name = "ps"; diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts index 0b2258ef88f..b6f42357b45 100644 --- a/arch/arm/dts/sun50i-a64-pinetab.dts +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -98,7 +98,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index 945afdb508d..065b1861633 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -74,7 +74,7 @@ status = "okay"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 2240eaec5dd..b6928cc668d 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -107,27 +107,19 @@ gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - }; - - opp-312000000 { - opp-hz = /bits/ 64 <312000000>; - }; - opp-432000000 { opp-hz = /bits/ 64 <432000000>; }; }; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + osc32k: osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -216,21 +208,21 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_alert1: cpu_alert1 { + cpu_alert1: cpu-alert1 { /* milliCelsius */ temperature = <90000>; hysteresis = <2000>; type = "hot"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <110000>; hysteresis = <2000>; diff --git a/arch/arm/dts/sun50i-h313-tanix-tx1.dts b/arch/arm/dts/sun50i-h313-tanix-tx1.dts new file mode 100644 index 00000000000..bb2cde59bd0 --- /dev/null +++ b/arch/arm/dts/sun50i-h313-tanix-tx1.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Tanix TX1"; + compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + ethernet0 = &sdio_wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "hidden"; + linux,code = <BTN_0>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + default-state = "on"; + }; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + max-frequency = <100000000>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_dldo1>; + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* Supplies VCC-PLL, so needs to be always on. */ + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Supplies VCC-IO, so needs to be always on. */ + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1120000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts index 4c3921ac236..b69032c4455 100644 --- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts @@ -68,7 +68,7 @@ states = <1100000 0>, <1300000 1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts index a3e040da38a..3a7ee44708a 100644 --- a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts +++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts @@ -103,7 +103,7 @@ states = <1100000 0x0>, <1300000 0x1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ post-power-on-delay-ms = <200>; @@ -170,7 +170,7 @@ non-removable; status = "okay"; - rtl8189etv: sdio_wifi@1 { + rtl8189etv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts index d7f8bad6bb9..b699bb900e1 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts @@ -85,7 +85,7 @@ status = "okay"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */ }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts index 7ec5ac850a0..ae85131aac9 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts @@ -97,7 +97,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189ftv: sdio_wifi@1 { + rtl8189ftv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts index 22530ace12d..734481e998b 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts @@ -52,7 +52,7 @@ regulator-max-microvolt = <3300000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts index 87432c4f1ff..529285fc34f 100644 --- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts @@ -34,7 +34,7 @@ }; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts index f1957bb1edb..bdcec466246 100644 --- a/arch/arm/dts/sun50i-h6-orangepi-3.dts +++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts @@ -33,7 +33,7 @@ }; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts index fb31dcb1cb6..a3f65a45bd2 100644 --- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts +++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts @@ -11,7 +11,7 @@ serial1 = &uart1; /* BT-UART */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi index a5811d55bbe..4403769fc36 100644 --- a/arch/arm/dts/sun50i-h6-orangepi.dtsi +++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi @@ -32,7 +32,7 @@ }; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts index b710f1a0f53..66fe03910d5 100644 --- a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts +++ b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts @@ -5,13 +5,13 @@ #include "sun50i-h6-pine-h64.dts" +/delete-node/ ®_gmac_3v3; + / { model = "Pine H64 model B"; compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; - /delete-node/ reg_gmac_3v3; - - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts index b868ad17af8..bfb46572bda 100644 --- a/arch/arm/dts/sun50i-h6-pine-h64.dts +++ b/arch/arm/dts/sun50i-h6-pine-h64.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi index 09e21689284..82aa5679fc4 100644 --- a/arch/arm/dts/sun50i-h6.dtsi +++ b/arch/arm/dts/sun50i-h6.dtsi @@ -68,7 +68,7 @@ status = "disabled"; }; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi index af421ba24ce..d12b01c5f41 100644 --- a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi +++ b/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include "sun50i-h616.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -62,6 +63,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &mmc0 { vmmc-supply = <®_dldo1>; /* Card detection pin is not connected */ diff --git a/arch/arm/dts/sun50i-h616-cpu-opp.dtsi b/arch/arm/dts/sun50i-h616-cpu-opp.dtsi new file mode 100644 index 00000000000..aca22a7f019 --- /dev/null +++ b/arch/arm/dts/sun50i-h616-cpu-opp.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2023 Martin Botka <martin@somainline.org> + +/ { + cpu_opp_table: opp-table-cpu { + compatible = "allwinner,sun50i-h616-operating-points"; + nvmem-cells = <&cpu_speed_grade>; + opp-shared; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <900000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x1f>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x12>; + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <900000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x0d>; + }; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt-speed1 = <900000>; + opp-microvolt-speed4 = <940000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x12>; + }; + + opp-936000000 { + opp-hz = /bits/ 64 <936000000>; + opp-microvolt = <900000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x0d>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt-speed0 = <950000>; + opp-microvolt-speed1 = <940000>; + opp-microvolt-speed2 = <950000>; + opp-microvolt-speed3 = <950000>; + opp-microvolt-speed4 = <1020000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x1f>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt-speed0 = <1000000>; + opp-microvolt-speed2 = <1000000>; + opp-microvolt-speed3 = <1000000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x0d>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt-speed0 = <1050000>; + opp-microvolt-speed1 = <1020000>; + opp-microvolt-speed2 = <1050000>; + opp-microvolt-speed3 = <1050000>; + opp-microvolt-speed4 = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x1f>; + }; + + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x1d>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x0d>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt-speed1 = <1100000>; + opp-microvolt-speed3 = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x0a>; + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu_opp_table>; +}; diff --git a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts b/arch/arm/dts/sun50i-h616-orangepi-zero2.dts index b5d713926a3..a360d8567f9 100644 --- a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts +++ b/arch/arm/dts/sun50i-h616-orangepi-zero2.dts @@ -6,12 +6,17 @@ /dts-v1/; #include "sun50i-h616-orangepi-zero.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" / { model = "OrangePi Zero2"; compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; }; +&cpu0 { + cpu-supply = <®_dcdca>; +}; + &emac0 { allwinner,rx-delay-ps = <3100>; allwinner,tx-delay-ps = <700>; diff --git a/arch/arm/dts/sun50i-h616-x96-mate.dts b/arch/arm/dts/sun50i-h616-x96-mate.dts index 959b6fd1848..26d25b5b59e 100644 --- a/arch/arm/dts/sun50i-h616-x96-mate.dts +++ b/arch/arm/dts/sun50i-h616-x96-mate.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "sun50i-h616.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -32,6 +33,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdca>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h616.dtsi b/arch/arm/dts/sun50i-h616.dtsi index b2e85e52d1a..921d5f61d8d 100644 --- a/arch/arm/dts/sun50i-h616.dtsi +++ b/arch/arm/dts/sun50i-h616.dtsi @@ -26,6 +26,7 @@ reg = <0>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -34,6 +35,7 @@ reg = <1>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -42,6 +44,7 @@ reg = <2>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -50,6 +53,7 @@ reg = <3>; enable-method = "psci"; clocks = <&ccu CLK_CPUX>; + #cooling-cells = <2>; }; }; @@ -156,6 +160,10 @@ ths_calibration: thermal-sensor-calibration@14 { reg = <0x14 0x8>; }; + + cpu_speed_grade: cpu-speed-grade@0 { + reg = <0x0 2>; + }; }; watchdog: watchdog@30090a0 { @@ -194,7 +202,7 @@ }; i2c0_pins: i2c0-pins { - pins = "PI6", "PI7"; + pins = "PI5", "PI6"; function = "i2c0"; }; @@ -775,6 +783,15 @@ #reset-cells = <1>; }; + nmi_intc: interrupt-controller@7010320 { + compatible = "allwinner,sun50i-h616-nmi", + "allwinner,sun9i-a80-nmi"; + reg = <0x07010320 0xc>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + r_pio: pinctrl@7022000 { compatible = "allwinner,sun50i-h616-r-pinctrl"; reg = <0x07022000 0x400>; diff --git a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi b/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi index 8c1263a3939..e92d150aaf1 100644 --- a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi +++ b/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi @@ -4,6 +4,11 @@ */ #include "sun50i-h616.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; &mmc2 { pinctrl-names = "default"; diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts b/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts index 21ca1977055..6a4f0da9723 100644 --- a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts +++ b/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "sun50i-h616.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -53,6 +54,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts b/arch/arm/dts/sun50i-h618-orangepi-zero3.dts index b3b1b869212..e1cd7572a14 100644 --- a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts +++ b/arch/arm/dts/sun50i-h618-orangepi-zero3.dts @@ -6,12 +6,17 @@ /dts-v1/; #include "sun50i-h616-orangepi-zero.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" / { model = "OrangePi Zero3"; compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &emac0 { allwinner,tx-delay-ps = <700>; phy-mode = "rgmii-rxid"; diff --git a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts index ac0a2b7ea6f..d6631bfe629 100644 --- a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts +++ b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "sun50i-h616.dtsi" +#include "sun50i-h616-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -41,7 +42,7 @@ regulator-always-on; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; @@ -51,6 +52,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h64-remix-mini-pc.dts b/arch/arm/dts/sun50i-h64-remix-mini-pc.dts index c1a15d60bf3..464a3078afd 100644 --- a/arch/arm/dts/sun50i-h64-remix-mini-pc.dts +++ b/arch/arm/dts/sun50i-h64-remix-mini-pc.dts @@ -42,7 +42,7 @@ regulator-always-on; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts new file mode 100644 index 00000000000..ee30584b6ad --- /dev/null +++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Anbernic RG35XX 2024"; + chassis-type = "handset"; + compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio_keys_gamepad: gpio-keys-gamepad { + compatible = "gpio-keys"; + + button-a { + label = "Action-Pad A"; + gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_EAST>; + }; + + button-b { + label = "Action-Pad B"; + gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_SOUTH>; + }; + + button-down { + label = "D-Pad Down"; + gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + label = "Key L1"; + gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_TL>; + }; + + button-l2 { + label = "Key L2"; + gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_TL2>; + }; + + button-left { + label = "D-Pad left"; + gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-menu { + label = "Key Menu"; + gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_MODE>; + }; + + button-r1 { + label = "Key R1"; + gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_TR>; + }; + + button-r2 { + label = "Key R2"; + gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_TR2>; + }; + + button-right { + label = "D-Pad Right"; + gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + label = "Key Select"; + gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_SELECT>; + }; + button-start { + label = "Key Start"; + gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_START>; + }; + + button-up { + label = "D-Pad Up"; + gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + label = "Action-Pad X"; + gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_NORTH>; + }; + + button-y { + label = "Action Pad Y"; + gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_WEST>; + }; + }; + + gpio-keys-volume { + compatible = "gpio-keys"; + autorepeat; + + button-vol-up { + label = "Key Volume Up"; + gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */ + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-vol-down { + label = "Key Volume Down"; + gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */ + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */ + default-state = "on"; + }; + }; + + reg_vcc5v: regulator-vcc5v { /* USB-C power input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc1>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_cldo3>; + disable-wp; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pa-supply = <®_cldo3>; + vcc-pc-supply = <®_cldo3>; + vcc-pe-supply = <®_cldo3>; + vcc-pf-supply = <®_cldo3>; + vcc-pg-supply = <®_aldo4>; + vcc-ph-supply = <®_cldo3>; + vcc-pi-supply = <®_cldo3>; +}; + +&r_rsb { + status = "okay"; + + axp717: pmic@3a3 { + compatible = "x-powers,axp717"; + reg = <0x3a3>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + + regulators { + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <940000>; + regulator-max-microvolt = <940000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + + reg_aldo1: aldo1 { + /* 1.8v - unused */ + }; + + reg_aldo2: aldo2 { + /* 1.8v - unused */ + }; + + reg_aldo3: aldo3 { + /* 1.8v - unused */ + }; + + reg_aldo4: aldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg"; + }; + + reg_bldo1: bldo1 { + /* 1.8v - unused */ + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll"; + }; + + reg_bldo3: bldo3 { + /* 2.8v - unused */ + }; + + reg_bldo4: bldo4 { + /* 1.2v - unused */ + }; + + reg_cldo1: cldo1 { + /* 3.3v - audio codec - not yet implemented */ + }; + + reg_cldo2: cldo2 { + /* 3.3v - unused */ + }; + + reg_cldo3: cldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_boost: boost { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5200000>; + regulator-name = "boost"; + }; + + reg_cpusldo: cpusldo { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */ +&usbotg { + dr_mode = "peripheral"; /* USB type-C receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts new file mode 100644 index 00000000000..63036256917 --- /dev/null +++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>. + * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>. + */ + +#include "sun50i-h700-anbernic-rg35xx-plus.dts" + +/ { + model = "Anbernic RG35XX H"; + compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700"; +}; + +&gpio_keys_gamepad { + button-thumbl { + label = "GPIO Thumb Left"; + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + label = "GPIO Thumb Right"; + gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */ + linux,input-type = <EV_KEY>; + linux,code = <BTN_THUMBR>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts new file mode 100644 index 00000000000..60a8e492210 --- /dev/null +++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>. + */ + +#include "sun50i-h700-anbernic-rg35xx-2024.dts" + +/ { + model = "Anbernic RG35XX Plus"; + compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700"; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; +}; + +/* SDIO WiFi RTL8821CS */ +&mmc1 { + vmmc-supply = <®_cldo4>; + vqmmc-supply = <®_aldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */ + interrupt-names = "host-wake"; + }; +}; + +/* Bluetooth RTL8821CS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; + device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ + enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */ + host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */ + }; +}; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index 3325ab07094..2c9152b151b 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -62,14 +62,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts index 5c3562b85a5..ffbd99c176d 100644 --- a/arch/arm/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts @@ -77,7 +77,7 @@ }; }; - mmc0_pwrseq: mmc0_pwrseq { + mmc0_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ }; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index 4192c23848c..8c784a2c086 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -77,7 +77,7 @@ }; }; - mmc0_pwrseq: mmc0_pwrseq { + mmc0_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ }; diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts index 486cec6f71e..41955fe5490 100644 --- a/arch/arm/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/dts/sun6i-a31-hummingbird.dts @@ -109,7 +109,7 @@ }; }; - reg_vga_3v3: vga_3v3_regulator { + reg_vga_3v3: vga-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "vga-3v3"; regulator-min-microvolt = <3300000>; @@ -119,7 +119,7 @@ gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index b32d2ab6aa2..a65c09ec054 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -179,14 +179,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <70000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; @@ -1315,7 +1315,7 @@ compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; clocks = <&rtc CLK_OSC32K>, <&osc24M>, @@ -1324,7 +1324,7 @@ clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -1333,14 +1333,14 @@ clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun6i-a31-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun6i-a31-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -1350,14 +1350,14 @@ "apb0_i2c"; }; - ir_clk: ir_clk { + ir_clk: ir-clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; clocks = <&rtc CLK_OSC32K>, <&osc24M>; clock-output-names = "ir"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts index efb25b949f3..2f3d93e56d7 100644 --- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -75,7 +75,7 @@ }; }; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ }; diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts index caa935ca4f1..f2d7fab9978 100644 --- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -86,7 +86,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 52160e36830..be9b31d0f4b 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -96,7 +96,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ clocks = <&ccu CLK_OUT_A>; diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts index 3def2a33059..f1e26b75cd9 100644 --- a/arch/arm/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts @@ -65,7 +65,7 @@ stdout-path = "serial0:115200n8"; }; - reg_mmc3_vdd: mmc3_vdd { + reg_mmc3_vdd: regulator-mmc3-vdd { compatible = "regulator-fixed"; regulator-name = "mmc3_vdd"; regulator-min-microvolt = <3000000>; @@ -74,7 +74,7 @@ gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ }; - reg_gmac_vdd: gmac_vdd { + reg_gmac_vdd: regulator-gmac-vdd { compatible = "regulator-fixed"; regulator-name = "gmac_vdd"; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts index 20bf09b2226..fb835730bbc 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -14,7 +14,7 @@ model = "Olimex A20-Olimex-SOM-EVB-eMMC"; compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20"; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts index a59755a2e7a..e8977c2fe79 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -13,7 +13,7 @@ model = "Olimex A20-SOM204-EVB-eMMC"; compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20"; - mmc2_pwrseq: mmc2_pwrseq { + mmc2_pwrseq: pwrseq-1 { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts index 54af6c18075..a5540665744 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts @@ -65,7 +65,7 @@ }; }; - rtl_pwrseq: rtl_pwrseq { + rtl_pwrseq: pwrseq-0 { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; }; @@ -177,7 +177,7 @@ non-removable; status = "okay"; - rtl8723bs: sdio_wifi@1 { + rtl8723bs: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index ecb91fb899f..435a189332e 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -82,7 +82,7 @@ }; }; - reg_axp_ipsout: axp_ipsout { + reg_axp_ipsout: regulator-axp-ipsout { compatible = "regulator-fixed"; regulator-name = "axp-ipsout"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts index 3bfae98f3cc..29199b6a3b4 100644 --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index 5574299685a..5f44f09c554 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -153,14 +153,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index a0cac966af3..4ebb0a7a78f 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -108,7 +108,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -116,7 +116,7 @@ clock-output-names = "osc24M"; }; - ext_osc32k: ext_osc32k_clk { + ext_osc32k: ext-osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -730,7 +730,7 @@ compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -739,7 +739,7 @@ clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -748,14 +748,14 @@ clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun8i-a23-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun8i-a23-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -764,7 +764,7 @@ "apb0_i2c"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts index d5f6aebd721..0c585a6d990 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -52,7 +52,7 @@ ethernet0 = &esp8089; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ @@ -76,7 +76,7 @@ non-removable; status = "okay"; - esp8089: sdio_wifi@1 { + esp8089: wifi@1 { compatible = "esp,esp8089"; reg = <1>; esp,crystal-26M-en = <2>; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 9f9232a2fef..63cb4e194a0 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -52,7 +52,7 @@ ethernet0 = &esp8089; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ @@ -69,7 +69,7 @@ non-removable; status = "okay"; - esp8089: sdio_wifi@1 { + esp8089: wifi@1 { compatible = "esp,esp8089"; reg = <1>; esp,crystal-26M-en = <2>; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 2dfdd0a3151..f00ce03ffc8 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -85,7 +85,7 @@ non-removable; status = "okay"; - rtl8703as: sdio_wifi@1 { + rtl8703as: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts index 065cb620aa9..162ba93f748 100644 --- a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts @@ -78,7 +78,7 @@ non-removable; status = "okay"; - rtl8723bs: sdio_wifi@1 { + rtl8723bs: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi index 30fdd2703b1..36b2d78cdab 100644 --- a/arch/arm/dts/sun8i-a33.dtsi +++ b/arch/arm/dts/sun8i-a33.dtsi @@ -323,35 +323,35 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - gpu_alert0: gpu_alert0 { + gpu_alert0: gpu-alert0 { /* milliCelsius */ temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_alert1: cpu_alert1 { + cpu_alert1: cpu-alert1 { /* milliCelsius */ temperature = <90000>; hysteresis = <2000>; type = "hot"; }; - gpu_alert1: gpu_alert1 { + gpu_alert1: gpu-alert1 { /* milliCelsius */ temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <110000>; hysteresis = <2000>; diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts index 197cf6959b5..582b919336f 100644 --- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts @@ -95,7 +95,7 @@ gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts index e26af7cf10e..c5677f99e15 100644 --- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts @@ -144,7 +144,7 @@ compatible = "linux,spdif-dit"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; diff --git a/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/dts/sun8i-a83t-tbs-a711.dts index 13ae10f60d5..a2685fb53e3 100644 --- a/arch/arm/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/dts/sun8i-a83t-tbs-a711.dts @@ -123,7 +123,7 @@ vin-supply = <®_vbat>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index cc40622466a..90f2c08d051 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -164,7 +164,7 @@ ranges; /* TODO: PRCM block has a mux for this. */ - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -177,14 +177,14 @@ * It is an internal RC-based oscillator. * TODO: Its controls are in the PRCM block. */ - osc16M: osc16M_clk { + osc16M: osc16M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <16000000>; clock-output-names = "osc16M"; }; - osc16Md512: osc16Md512_clk { + osc16Md512: osc16Md512-clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <512>; @@ -1126,7 +1126,7 @@ #reset-cells = <1>; }; - r_cpucfg@1f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun8i-a83t-r-cpucfg"; reg = <0x1f01c00 0x400>; }; diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d729b7c705d..d3a7c9fa23e 100644 --- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -103,7 +103,7 @@ cpu-supply = <®_vcc1v2>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts index 3356f4210d4..79b03b31c5e 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts @@ -43,11 +43,12 @@ /* Orange Pi R1 is based on Orange Pi Zero design */ #include "sun8i-h2-plus-orangepi-zero.dts" +/delete-node/ ®_vcc_wifi; + / { model = "Xunlong Orange Pi R1"; compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; - /delete-node/ reg_vcc_wifi; /* * Ths pin of this regulator is the same with the Wi-Fi extra @@ -89,7 +90,7 @@ vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; - rtl8189etv: sdio_wifi@1 { + rtl8189etv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index 3706216ffb4..1b001f2ad0e 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -80,7 +80,7 @@ }; }; - reg_vcc_wifi: reg_vcc_wifi { + reg_vcc_wifi: reg-vcc-wifi { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -105,7 +105,7 @@ states = <1100000 0>, <1300000 1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; post-power-on-delay-ms = <200>; @@ -149,7 +149,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - xr819: sdio_wifi@1 { + xr819: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts index a6d38ecee14..5b77300307d 100644 --- a/arch/arm/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts @@ -122,7 +122,7 @@ compatible = "linux,spdif-dit"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; @@ -185,7 +185,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - sdiowifi: sdio_wifi@1 { + sdiowifi: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts index 343b02b9715..2b0566d4b38 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts @@ -87,7 +87,7 @@ vin-supply = <®_vcc5v0>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; @@ -119,7 +119,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts index 4ba533b0340..59bd0746acf 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts @@ -62,7 +62,7 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; @@ -132,7 +132,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts index 9e1a33f94ca..6d85370e04f 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts @@ -73,7 +73,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts index 42cd1131adf..870649760f7 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts @@ -43,7 +43,7 @@ <1300000 0x1>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index f1f9dbead32..d2ae47b074b 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -105,7 +105,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; @@ -169,7 +169,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189: sdio_wifi@1 { + rtl8189: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index 305b34a321f..6a4316a5246 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -143,7 +143,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189ftv: sdio_wifi@1 { + rtl8189ftv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts index babf4cf1b2f..8a49b3376df 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts @@ -63,7 +63,7 @@ * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ - rtl8189ftv: sdio_wifi@1 { + rtl8189ftv: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts index 561ea1d2f86..7a6444a10e2 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -92,7 +92,7 @@ regulator-max-microvolt = <3300000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi index 3d9a1524e17..272584881bb 100644 --- a/arch/arm/dts/sun8i-q8-common.dtsi +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -62,7 +62,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; /* * Q8 boards use various PL# pins as wifi-en. On other boards @@ -94,7 +94,7 @@ non-removable; status = "okay"; - sdio_wifi: sdio_wifi@1 { + sdio_wifi: wifi@1 { reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts index f97218e70c1..5001f10c27a 100644 --- a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts @@ -88,7 +88,7 @@ regulator-max-microvolt = <5000000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts index 2be1b76fe2f..40109969cc8 100644 --- a/arch/arm/dts/sun8i-r16-parrot.dts +++ b/arch/arm/dts/sun8i-r16-parrot.dts @@ -75,7 +75,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ }; diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts index 28197bbcb1d..cd2351acc32 100644 --- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -100,7 +100,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/dts/sun8i-r40-oka40i-c.dts b/arch/arm/dts/sun8i-r40-oka40i-c.dts index 0bd1336206b..15b0b4de626 100644 --- a/arch/arm/dts/sun8i-r40-oka40i-c.dts +++ b/arch/arm/dts/sun8i-r40-oka40i-c.dts @@ -62,7 +62,7 @@ regulator-max-microvolt = <5000000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts index 20966e954ed..e0d4404b595 100644 --- a/arch/arm/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/dts/sun8i-s3-pinecube.dts @@ -51,7 +51,7 @@ startup-delay-us = <200000>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi index e8a04476b77..9e13c2aa891 100644 --- a/arch/arm/dts/sun8i-v3s.dtsi +++ b/arch/arm/dts/sun8i-v3s.dtsi @@ -98,7 +98,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -106,7 +106,7 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + osc32k: osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 434871040ac..6575ef27445 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -94,7 +94,7 @@ enable-active-high; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ clocks = <&ccu CLK_OUTA>; diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index 7d3f3300f43..a1ae0929cec 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -196,14 +196,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: mii_phy_tx_clk { + mii_phy_tx_clk: mii-phy-tx-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: gmac_int_tx_clk { + gmac_int_tx_clk: gmac-int-tx-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi index 1d1d127cf38..873817ddb4e 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi @@ -98,7 +98,7 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc CLK_OSC32K_FANOUT>; diff --git a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi index 60804b0e6c5..be5f5528a11 100644 --- a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi +++ b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi index bdc796f4622..43f6938381c 100644 --- a/arch/arm/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/dts/sunxi-h3-h5.dtsi @@ -83,7 +83,7 @@ #size-cells = <1>; ranges; - osc24M: osc24M_clk { + osc24M: osc24M-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -91,7 +91,7 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + osc32k: osc32k-clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 4bcd9b9af7f..4ad77c75f5e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -549,6 +549,12 @@ S: Maintained F: configs/Sunchip_CX-A99_defconfig W: https://linux-sunxi.org/Sunchip_CX-A99 +TANIX TX1 BOARD +M: Andre Przywara <andre.przywara@arm.com> +S: Maintained +F: configs/tanix_tx1_defconfig +W: https://linux-sunxi.org/Tanix_TX1 + TANIX TX6 BOARD M: Jernej Skrabec <jernej.skrabec@siol.net> S: Maintained diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig new file mode 100644 index 00000000000..9915fff4a00 --- /dev/null +++ b/configs/tanix_tx1_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919 +CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee +CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469 +CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d +CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213 +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR3=y +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP313_POWER=y +CONFIG_AXP_DCDC3_VOLT=1200 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/drivers/spi/spi-sunxi.c b/drivers/spi/spi-sunxi.c index a7333d8d9c0..88550b8ea84 100644 --- a/drivers/spi/spi-sunxi.c +++ b/drivers/spi/spi-sunxi.c @@ -233,7 +233,7 @@ err_ahb: static void sun4i_spi_set_speed_mode(struct udevice *dev) { struct sun4i_spi_priv *priv = dev_get_priv(dev); - unsigned int div; + unsigned int div, div_cdr2; u32 reg; /* @@ -249,6 +249,8 @@ static void sun4i_spi_set_speed_mode(struct udevice *dev) * We have two choices there. Either we can use the clock * divide rate 1, which is calculated thanks to this formula: * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1)) + * Or for sun6i/sun8i variants: + * SPI_CLK = MOD_CLK / (2 ^ cdr) * Or we can use CDR2, which is calculated with the formula: * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) * Whether we use the former or the latter is set through the @@ -256,18 +258,18 @@ static void sun4i_spi_set_speed_mode(struct udevice *dev) * * First try CDR2, and if we can't reach the expected * frequency, fall back to CDR1. + * There is one exception if the requested clock is the input + * clock. In that case we always use CDR1 because we'll get a + * 1:1 ration for sun6i/sun8i variants. */ div = DIV_ROUND_UP(SUNXI_INPUT_CLOCK, priv->freq); + div_cdr2 = DIV_ROUND_UP(div, 2); reg = readl(SPI_REG(priv, SPI_CCR)); - if ((div / 2) <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) { - div /= 2; - if (div > 0) - div--; - + if (div != 1 && (div_cdr2 <= (SUN4I_CLK_CTL_CDR2_MASK + 1))) { reg &= ~(SUN4I_CLK_CTL_CDR2_MASK | SUN4I_CLK_CTL_DRS); - reg |= SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS; + reg |= SUN4I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN4I_CLK_CTL_DRS; } else { div = fls(div - 1); /* The F1C100s encodes the divider as 2^(n+1) */ diff --git a/tools/sunxi_toc0.c b/tools/sunxi_toc0.c index 292649fe90f..76693647a09 100644 --- a/tools/sunxi_toc0.c +++ b/tools/sunxi_toc0.c @@ -444,7 +444,7 @@ static int toc0_verify_cert_item(const uint8_t *buf, uint32_t len, RSA *fw_key, /* If a digest was provided, compare it to the embedded digest. */ extension = &totalSequence->mainSequence.explicit3.extension; - if (digest && memcmp(&extension->digest, digest, SHA256_DIGEST_LENGTH)) { + if (memcmp(&extension->digest, digest, SHA256_DIGEST_LENGTH)) { pr_err("Wrong firmware digest in certificate\n"); goto err; } |