doc: ti: update bash code-block directives to prompt

The code-block directive requires addition of the prompt symbol for each
line, using the prompt directive instead allows for auto insertion of
the symbol per line[1].

For the readers, the character added by the prompt directive is
un-selectable i.e the entire line can be more easily selected for copy
pasting etc. Whereas with code-block, the prompt symbol like "$" is also
selectable which is usually not the intent.

This is mostly a QoL addition + making the docs consistent since k3.rst
makes use of prompt directives which these board docs include from.

[1]: https://pypi.org/project/sphinx-prompt/

Signed-off-by: Anshul Dalal <anshuld@ti.com>

4 files changed, 33 insertions, 33 deletions

diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst
index 262340ef59a..43a1db68873 100644
--- a/doc/board/ti/am62ax_sk.rst
+++ b/doc/board/ti/am62ax_sk.rst
@@ -81,16 +81,16 @@ Set the variables corresponding to this platform:
 .. include::  ../ti/k3.rst
     :start-after: .. k3_rst_include_start_common_env_vars_defn
     :end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash
 
- $ export UBOOT_CFG_CORTEXR=am62ax_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=am62ax_evm_a53_defconfig
- $ export TFA_BOARD=lite
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am62ax
- $ # we dont use any extra OPTEE parameters
- $ unset OPTEE_EXTRA_ARGS
+   export UBOOT_CFG_CORTEXR=am62ax_evm_r5_defconfig
+   export UBOOT_CFG_CORTEXA=am62ax_evm_a53_defconfig
+   export TFA_BOARD=lite
+   # we dont use any extra TFA parameters
+   unset TFA_EXTRA_ARGS
+   export OPTEE_PLATFORM=k3-am62ax
+   # we dont use any extra OPTEE parameters
+   unset OPTEE_EXTRA_ARGS
 
 1. Trusted Firmware-A:
 
@@ -212,6 +212,6 @@ detailed setup information.
 
 To start OpenOCD and connect to the board
 
-.. code-block:: bash
+.. prompt:: bash
 
   openocd -f board/ti_am62a7evm.cfg
diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst
index 99bdc034869..a07d6a4da45 100644
--- a/doc/board/ti/am62px_sk.rst
+++ b/doc/board/ti/am62px_sk.rst
@@ -91,15 +91,15 @@ Set the variables corresponding to this platform:
     :start-after: .. k3_rst_include_start_common_env_vars_defn
     :end-before: .. k3_rst_include_end_common_env_vars_defn
 
-.. code-block:: bash
+.. prompt:: bash
 
- $ export UBOOT_CFG_CORTEXR=am62px_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=am62px_evm_a53_defconfig
- $ export TFA_BOARD=lite
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am62x
- $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
+   export UBOOT_CFG_CORTEXR=am62px_evm_r5_defconfig
+   export UBOOT_CFG_CORTEXA=am62px_evm_a53_defconfig
+   export TFA_BOARD=lite
+   # we dont use any extra TFA parameters
+   unset TFA_EXTRA_ARGS
+   export OPTEE_PLATFORM=k3-am62x
+   export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
 
 .. am62px_evm_rst_include_start_build_steps
 
@@ -312,6 +312,6 @@ detailed setup information.
 
 To start OpenOCD and connect to the board
 
-.. code-block:: bash
+.. prompt:: bash
 
   openocd -f board/ti_am62pevm.cfg
diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst
index edc29a4f9e4..9c53fa50858 100644
--- a/doc/board/ti/j722s_evm.rst
+++ b/doc/board/ti/j722s_evm.rst
@@ -68,12 +68,12 @@ Set the variables corresponding to this platform:
     :start-after: .. k3_rst_include_start_common_env_vars_defn
     :end-before: .. k3_rst_include_end_common_env_vars_defn
 
-.. code-block:: bash
+.. prompt:: bash
 
- $ export UBOOT_CFG_CORTEXR=j722s_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=j722s_evm_a53_defconfig
- $ export TFA_BOARD=lite
- $ export OPTEE_PLATFORM=k3-am62x
+   export UBOOT_CFG_CORTEXR=j722s_evm_r5_defconfig
+   export UBOOT_CFG_CORTEXA=j722s_evm_a53_defconfig
+   export TFA_BOARD=lite
+   export OPTEE_PLATFORM=k3-am62x
 
 .. j722s_evm_rst_include_start_build_steps
 
@@ -258,6 +258,6 @@ detailed setup information.
 
 To start OpenOCD and connect to the board
 
-.. code-block:: bash
+.. prompt:: bash
 
   openocd -f board/ti_j722sevm.cfg
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
index a1e927cb743..349fb394d74 100644
--- a/doc/board/ti/j784s4_evm.rst
+++ b/doc/board/ti/j784s4_evm.rst
@@ -81,14 +81,14 @@ Set the variables corresponding to this platform:
 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_common_env_vars_defn
     :end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash
 
- $ export UBOOT_CFG_CORTEXR=j784s4_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=j784s4_evm_a72_defconfig
- $ export TFA_BOARD=j784s4
- $ export TFA_EXTRA_ARGS="K3_USART=0x8"
- $ export OPTEE_PLATFORM=k3-j784s4
- $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
+   export UBOOT_CFG_CORTEXR=j784s4_evm_r5_defconfig
+   export UBOOT_CFG_CORTEXA=j784s4_evm_a72_defconfig
+   export TFA_BOARD=j784s4
+   export TFA_EXTRA_ARGS="K3_USART=0x8"
+   export OPTEE_PLATFORM=k3-j784s4
+   export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
 
 .. j784s4_evm_rst_include_start_build_steps
 
@@ -326,6 +326,6 @@ Debugging U-Boot on J784S4-EVM and AM69-SK
 To start OpenOCD and connect to J784S4-EVM or AM69-SK board, use the
 following.
 
-.. code-block:: bash
+.. prompt:: bash
 
   openocd -f board/ti_j784s4evm.cfg