arc: move common sources in library

"reset.c" and "cpu.c" have no architecture-specific code at all.
Others are applicable to either ARC CPU.

This change is a preparation to submission of ARCv2 architecture port.

Even though ARCv1 and ARCv2 ISAs are not binary compatible most of
built-in modules still have the same programming model - AUX registers
are mapped in the same addresses and hold the same data (new featues
extend existing ones).

So only low-level assembly code (start-up, interrupt handlers) is left
as CPU(actually ISA)-specific. This significantyl simplifies maintenance
of multiple CPUs/ISAs.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Igor Guryanov <guryanov@synopsys.com>

1 files changed, 47 insertions, 0 deletions

diff --git a/arch/arc/lib/cpu.c b/arch/arc/lib/cpu.c
new file mode 100644
index 00000000000..50634b860f7
--- /dev/null
+++ b/arch/arc/lib/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_SYS_ICACHE_OFF
+	icache_disable();
+#else
+	icache_enable();
+	invalidate_icache_all();
+#endif
+
+	flush_dcache_all();
+#ifdef CONFIG_SYS_DCACHE_OFF
+	dcache_disable();
+#else
+	dcache_enable();
+#endif
+	timer_init();
+
+/* In simulation (ISS) "CHIPID" and "ARCNUM" are all "ff" */
+	if ((read_aux_reg(ARC_AUX_IDENTITY) & 0xffffff00) == 0xffffff00)
+		gd->arch.running_on_hw = 0;
+	else
+		gd->arch.running_on_hw = 1;
+
+	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	return 0;
+}