arm: socfpga: fpga: Add SoCFPGA FPGA programming interface

Add code necessary to program the FPGA part of SoCFPGA from U-Boot
with an RBF blob. This patch also integrates the code into the
FPGA driver framework in U-Boot so it can be used via the 'fpga'
command.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>

V2: Move the not-CPU specific stuff into drivers/fpga/ and base
    this on the cleaned up altera FPGA support.

1 files changed, 78 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/socfpga/fpga_manager.c b/arch/arm/cpu/armv7/socfpga/fpga_manager.c
new file mode 100644
index 00000000000..43fd2fedee8
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/fpga_manager.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * All rights reserved.
+ *
+ * This file contains only support functions used also by the SoCFPGA
+ * platform code, the real meat is located in drivers/fpga/socfpga.c .
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Timeout count */
+#define FPGA_TIMEOUT_CNT		0x1000000
+
+static struct socfpga_fpga_manager *fpgamgr_regs =
+	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+
+/* Check whether FPGA Init_Done signal is high */
+static int is_fpgamgr_initdone_high(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->gpio_ext_porta);
+	return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
+}
+
+/* Get the FPGA mode */
+int fpgamgr_get_mode(void)
+{
+	unsigned long val;
+
+	val = readl(&fpgamgr_regs->stat);
+	return val & FPGAMGRREGS_STAT_MODE_MASK;
+}
+
+/* Check whether FPGA is ready to be accessed */
+int fpgamgr_test_fpga_ready(void)
+{
+	/* Check for init done signal */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	/* Check again to avoid false glitches */
+	if (!is_fpgamgr_initdone_high())
+		return 0;
+
+	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
+		return 0;
+
+	return 1;
+}
+
+/* Poll until FPGA is ready to be accessed or timeout occurred */
+int fpgamgr_poll_fpga_ready(void)
+{
+	unsigned long i;
+
+	/* If FPGA is blank, wait till WD invoke warm reset */
+	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
+		/* check for init done signal */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		/* check again to avoid false glitches */
+		if (!is_fpgamgr_initdone_high())
+			continue;
+		return 1;
+	}
+
+	return 0;
+}