Merge branch 'next'

Signed-off-by: Tom Rini <trini@konsulko.com>

13 files changed, 62 insertions, 488 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 78317e474db..1db71df2721 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -75,14 +75,6 @@ config OMAP54XX
 	imply SPL_SERIAL
 	imply SYS_I2C_OMAP24XX
 
-config TI814X
-	bool "TI814X SoC"
-	select SPECIFY_CONSOLE_INDEX
-	help
-	  Support for AM335x SOC from Texas Instruments.
-	  The AM335x high performance SOC features a Cortex-A8
-	  ARM core and more.
-
 config TI816X
 	bool "TI816X SoC"
 	select SPECIFY_CONSOLE_INDEX
@@ -144,6 +136,9 @@ config SYS_MPUCLK
 	help
 	  Defines the MPU clock speed (in MHz).
 
+config SYS_OMAP_ABE_SYSCK
+	bool
+
 config TI_SECURE_EMIF_REGION_START
 	hex "Reserved EMIF region start address"
 	depends on TI_SECURE_DEVICE
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 6c2d46abc4c..1299aec055e 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -8,16 +8,6 @@ config TARGET_TI816X_EVM
 
 endif
 
-if TI814X
-
-config TARGET_TI814X_EVM
-	bool "Support ti814x_evm"
-	help
-	  This option specifies support for the TI8148
-	  EVM development platform.
-
-endif
-
 if AM33XX
 
 config AM33XX_CHILISOM
@@ -230,7 +220,6 @@ config TARGET_AM43XX_EVM
 	bool "Support am43xx_evm"
 	select BOARD_LATE_INIT
 	select TI_I2C_BOARD_DETECT
-	imply DM_ETH
 	imply DM_I2C
 	imply DM_SPI
 	imply DM_SPI_FLASH
diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile
index 4e4f98ea903..bf94d345dae 100644
--- a/arch/arm/mach-omap2/am33xx/Makefile
+++ b/arch/arm/mach-omap2/am33xx/Makefile
@@ -3,7 +3,6 @@
 # Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 
 obj-$(CONFIG_AM33XX)	+= clock_am33xx.o
-obj-$(CONFIG_TI814X)	+= clock_ti814x.o
 obj-$(CONFIG_AM43XX)	+= clock_am43xx.o
 
 ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),)
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index f393ff91441..a52d04d85c8 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -72,14 +72,14 @@ int dram_init(void)
 
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size(
-			(void *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_MAX_RAM_BANK_SIZE);
+			(void *)CFG_SYS_SDRAM_BASE,
+			CFG_MAX_RAM_BANK_SIZE);
 	return 0;
 }
 
 int dram_init_banksize(void)
 {
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
 	gd->bd->bi_dram[0].size = gd->ram_size;
 
 	return 0;
@@ -87,29 +87,29 @@ int dram_init_banksize(void)
 
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct ns16550_plat am33xx_serial[] = {
-	{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-# ifdef CONFIG_SYS_NS16550_COM2
-	{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-#  ifdef CONFIG_SYS_NS16550_COM3
-	{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CFG_SYS_NS16550_COM1, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+# ifdef CFG_SYS_NS16550_COM2
+	{ .base = CFG_SYS_NS16550_COM2, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+#  ifdef CFG_SYS_NS16550_COM3
+	{ .base = CFG_SYS_NS16550_COM3, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CFG_SYS_NS16550_COM4, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CFG_SYS_NS16550_COM5, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
+	{ .base = CFG_SYS_NS16550_COM6, .reg_shift = 2,
+	  .clock = CFG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
 #  endif
 # endif
 };
 
 U_BOOT_DRVINFOS(am33xx_uarts) = {
 	{ "ns16550_serial", &am33xx_serial[0] },
-#  ifdef CONFIG_SYS_NS16550_COM2
+#  ifdef CFG_SYS_NS16550_COM2
 	{ "ns16550_serial", &am33xx_serial[1] },
-#   ifdef CONFIG_SYS_NS16550_COM3
+#   ifdef CFG_SYS_NS16550_COM3
 	{ "ns16550_serial", &am33xx_serial[2] },
 	{ "ns16550_serial", &am33xx_serial[3] },
 	{ "ns16550_serial", &am33xx_serial[4] },
@@ -520,8 +520,8 @@ void board_init_f(ulong dummy)
 	sdram_init();
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size(
-			(void *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_MAX_RAM_BANK_SIZE);
+			(void *)CFG_SYS_SDRAM_BASE,
+			CFG_MAX_RAM_BANK_SIZE);
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/am33xx/clock_ti814x.c b/arch/arm/mach-omap2/am33xx/clock_ti814x.c
deleted file mode 100644
index 27abaff48fc..00000000000
--- a/arch/arm/mach-omap2/am33xx/clock_ti814x.c
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock_ti814x.c
- *
- * Clocks for TI814X based boards
- *
- * Copyright (C) 2013, Texas Instruments, Incorporated
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-/* PRCM */
-#define PRCM_MOD_EN		0x2
-
-/* CLK_SRC */
-#define OSC_SRC0		0
-#define OSC_SRC1		1
-
-#define L3_OSC_SRC		OSC_SRC0
-
-#define OSC_0_FREQ		20
-
-#define DCO_HS2_MIN		500
-#define DCO_HS2_MAX		1000
-#define DCO_HS1_MIN		1000
-#define DCO_HS1_MAX		2000
-
-#define SELFREQDCO_HS2		0x00000801
-#define SELFREQDCO_HS1		0x00001001
-
-#define MPU_N			0x1
-#define MPU_M			0x3C
-#define MPU_M2			1
-#define MPU_CLKCTRL		0x1
-
-#define L3_N			19
-#define L3_M			880
-#define L3_M2			4
-#define L3_CLKCTRL		0x801
-
-#define DDR_N			19
-#define DDR_M			666
-#define DDR_M2			2
-#define DDR_CLKCTRL		0x801
-
-/* ADPLLJ register values */
-#define ADPLLJ_CLKCTRL_HS2	0x00000801 /* HS2 mode, TINT2 = 1 */
-#define ADPLLJ_CLKCTRL_HS1	0x00001001 /* HS1 mode, TINT2 = 1 */
-#define ADPLLJ_CLKCTRL_CLKDCOLDOEN	(1 << 29)
-#define ADPLLJ_CLKCTRL_IDLE		(1 << 23)
-#define ADPLLJ_CLKCTRL_CLKOUTEN		(1 << 20)
-#define ADPLLJ_CLKCTRL_CLKOUTLDOEN	(1 << 19)
-#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ	(1 << 17)
-#define ADPLLJ_CLKCTRL_LPMODE		(1 << 12)
-#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN	(1 << 11)
-#define ADPLLJ_CLKCTRL_REGM4XEN		(1 << 10)
-#define ADPLLJ_CLKCTRL_TINITZ		(1 << 0)
-#define ADPLLJ_CLKCTRL_CLKDCO		(ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
-					 ADPLLJ_CLKCTRL_CLKOUTEN | \
-					 ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
-					 ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
-
-#define ADPLLJ_STATUS_PHASELOCK		(1 << 10)
-#define ADPLLJ_STATUS_FREQLOCK		(1 << 9)
-#define ADPLLJ_STATUS_PHSFRQLOCK	(ADPLLJ_STATUS_PHASELOCK | \
-					 ADPLLJ_STATUS_FREQLOCK)
-#define ADPLLJ_STATUS_BYPASSACK		(1 << 8)
-#define ADPLLJ_STATUS_BYPASS		(1 << 0)
-#define ADPLLJ_STATUS_BYPASSANDACK	(ADPLLJ_STATUS_BYPASSACK | \
-					 ADPLLJ_STATUS_BYPASS)
-
-#define ADPLLJ_TENABLE_ENB		(1 << 0)
-#define ADPLLJ_TENABLEDIV_ENB		(1 << 0)
-
-#define ADPLLJ_M2NDIV_M2SHIFT		16
-
-#define MPU_PLL_BASE			(PLL_SUBSYS_BASE + 0x048)
-#define L3_PLL_BASE			(PLL_SUBSYS_BASE + 0x110)
-#define DDR_PLL_BASE			(PLL_SUBSYS_BASE + 0x290)
-
-struct ad_pll {
-	unsigned int pwrctrl;
-	unsigned int clkctrl;
-	unsigned int tenable;
-	unsigned int tenablediv;
-	unsigned int m2ndiv;
-	unsigned int mn2div;
-	unsigned int fracdiv;
-	unsigned int bwctrl;
-	unsigned int fracctrl;
-	unsigned int status;
-	unsigned int m3div;
-	unsigned int rampctrl;
-};
-
-#define OSC_SRC_CTRL			(PLL_SUBSYS_BASE + 0x2C0)
-
-#define ENET_CLKCTRL_CMPL		0x30000
-
-#define SATA_PLL_BASE			(CTRL_BASE + 0x0720)
-
-struct sata_pll {
-	unsigned int pllcfg0;
-	unsigned int pllcfg1;
-	unsigned int pllcfg2;
-	unsigned int pllcfg3;
-	unsigned int pllcfg4;
-	unsigned int pllstatus;
-	unsigned int rxstatus;
-	unsigned int txstatus;
-	unsigned int testcfg;
-};
-
-#define SEL_IN_FREQ		(0x1 << 31)
-#define DIGCLRZ			(0x1 << 30)
-#define ENDIGLDO		(0x1 << 4)
-#define APLL_CP_CURR		(0x1 << 3)
-#define ENBGSC_REF		(0x1 << 2)
-#define ENPLLLDO		(0x1 << 1)
-#define ENPLL			(0x1 << 0)
-
-#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF)
-#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF)
-#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO)
-#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \
-			ENPLLLDO | ENPLL)
-
-#define PLL_LOCK		(0x1 << 0)
-
-#define ENSATAMODE		(0x1 << 31)
-#define PLLREFSEL		(0x1 << 30)
-#define MDIVINT			(0x4b << 18)
-#define EN_CLKAUX		(0x1 << 5)
-#define EN_CLK125M		(0x1 << 4)
-#define EN_CLK100M		(0x1 << 3)
-#define EN_CLK50M		(0x1 << 2)
-
-#define SATA_PLLCFG1 (ENSATAMODE |	\
-		      PLLREFSEL |	\
-		      MDIVINT |		\
-		      EN_CLKAUX |	\
-		      EN_CLK125M |	\
-		      EN_CLK100M |	\
-		      EN_CLK50M)
-
-#define DIGLDO_EN_CAPLESSMODE	(0x1 << 22)
-#define PLLDO_EN_LDO_STABLE	(0x1 << 11)
-#define PLLDO_EN_BUF_CUR	(0x1 << 7)
-#define PLLDO_EN_LP		(0x1 << 6)
-#define PLLDO_CTRL_TRIM_1_4V	(0x10 << 1)
-
-#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE |	\
-		      PLLDO_EN_LDO_STABLE |	\
-		      PLLDO_EN_BUF_CUR |	\
-		      PLLDO_EN_LP |		\
-		      PLLDO_CTRL_TRIM_1_4V)
-
-const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
-const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
-const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE;
-
-/*
- * Enable the peripheral clock for required peripherals
- */
-static void enable_per_clocks(void)
-{
-	/* HSMMC1 */
-	writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
-	while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* Ethernet */
-	writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
-	writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
-	while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0)
-		;
-	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
-	while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
-		;
-
-	/* RTC clocks */
-	writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl);
-	writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl);
-	while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN)
-		;
-}
-
-/*
- * select the HS1 or HS2 for DCO Freq
- * return : CLKCTRL
- */
-static u32 pll_dco_freq_sel(u32 clkout_dco)
-{
-	if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
-		return SELFREQDCO_HS2;
-	else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
-		return SELFREQDCO_HS1;
-	else
-		return -1;
-}
-
-/*
- * select the sigma delta config
- * return: sigma delta val
- */
-static u32 pll_sigma_delta_val(u32 clkout_dco)
-{
-	u32 sig_val = 0;
-
-	sig_val = (clkout_dco + 225) / 250;
-	sig_val = sig_val << 24;
-
-	return sig_val;
-}
-
-/*
- * configure individual ADPLLJ
- */
-static void pll_config(u32 base, u32 n, u32 m, u32 m2,
-		       u32 clkctrl_val, int adpllj)
-{
-	const struct ad_pll *adpll = (struct ad_pll *)base;
-	u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
-	u32 sig_val = 0, hs_mod = 0;
-
-	m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
-	mn2val = m;
-
-	/* calculate clkout_dco */
-	clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
-
-	/* sigma delta & Hs mode selection skip for ADPLLS*/
-	if (adpllj) {
-		sig_val = pll_sigma_delta_val(clkout_dco);
-		hs_mod = pll_dco_freq_sel(clkout_dco);
-	}
-
-	/* by-pass pll */
-	read_clkctrl = readl(&adpll->clkctrl);
-	writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
-	while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
-		!= ADPLLJ_STATUS_BYPASSANDACK)
-		;
-
-	/* clear TINITZ */
-	read_clkctrl = readl(&adpll->clkctrl);
-	writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
-
-	/*
-	 * ref_clk = 20/(n + 1);
-	 * clkout_dco = ref_clk * m;
-	 * clk_out = clkout_dco/m2;
-	*/
-	read_clkctrl = readl(&adpll->clkctrl) &
-			     ~(ADPLLJ_CLKCTRL_LPMODE |
-			     ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
-			     ADPLLJ_CLKCTRL_REGM4XEN);
-	writel(m2nval, &adpll->m2ndiv);
-	writel(mn2val, &adpll->mn2div);
-
-	/* Skip for modena(ADPLLS) */
-	if (adpllj) {
-		writel(sig_val, &adpll->fracdiv);
-		writel((read_clkctrl | hs_mod), &adpll->clkctrl);
-	}
-
-	/* Load M2, N2 dividers of ADPLL */
-	writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
-	writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
-
-	/* Load M, N dividers of ADPLL */
-	writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
-	writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
-
-	/* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
-	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
-	if (adpllj)
-		writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
-						&adpll->clkctrl);
-
-	/* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
-	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
-	writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
-
-	/* Wait for phase and freq lock */
-	while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
-	       ADPLLJ_STATUS_PHSFRQLOCK)
-		;
-}
-
-static void unlock_pll_control_mmr(void)
-{
-	/* TRM 2.10.1.4 and 3.2.7-3.2.11 */
-	writel(0x1EDA4C3D, 0x481C5040);
-	writel(0x2FF1AC2B, 0x48140060);
-	writel(0xF757FDC0, 0x48140064);
-	writel(0xE2BC3A6D, 0x48140068);
-	writel(0x1EBF131D, 0x4814006c);
-	writel(0x6F361E05, 0x48140070);
-}
-
-static void mpu_pll_config(void)
-{
-	pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
-}
-
-static void l3_pll_config(void)
-{
-	u32 l3_osc_src, rd_osc_src = 0;
-
-	l3_osc_src = L3_OSC_SRC;
-	rd_osc_src = readl(OSC_SRC_CTRL);
-
-	if (OSC_SRC0 == l3_osc_src)
-		writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
-	else
-		writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
-
-	pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
-}
-
-void ddr_pll_config(unsigned int ddrpll_m)
-{
-	pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
-}
-
-void sata_pll_config(void)
-{
-	/*
-	 * This sequence for configuring the SATA PLL
-	 * resident in the control module is documented
-	 * in TI8148 TRM section 21.3.1
-	 */
-	writel(SATA_PLLCFG1, &spll->pllcfg1);
-	udelay(50);
-
-	writel(SATA_PLLCFG3, &spll->pllcfg3);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_1, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_2, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_3, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_4, &spll->pllcfg0);
-	udelay(50);
-
-	while (((readl(&spll->pllstatus) & PLL_LOCK) == 0))
-		;
-}
-
-void enable_dmm_clocks(void)
-{
-	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
-	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
-	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
-	while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
-		;
-	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
-	while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
-		;
-	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
-		;
-	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
-	while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
-		;
-	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
-	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
-		;
-}
-
-void setup_clocks_for_console(void)
-{
-	unlock_pll_control_mmr();
-	/* UART0 */
-	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
-	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
-		;
-}
-
-void setup_early_clocks(void)
-{
-	setup_clocks_for_console();
-}
-
-/*
- * Configure the PLL/PRCM for necessary peripherals
- */
-void prcm_init(void)
-{
-	/* Enable the control module */
-	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
-
-	/* Configure PLLs */
-	mpu_pll_config();
-	l3_pll_config();
-	sata_pll_config();
-
-	/* Enable the required peripherals */
-	enable_per_clocks();
-}
diff --git a/arch/arm/mach-omap2/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c
index a5fdb0433dc..bf3da43ed98 100644
--- a/arch/arm/mach-omap2/am33xx/emif4.c
+++ b/arch/arm/mach-omap2/am33xx/emif4.c
@@ -28,26 +28,6 @@ static struct cm_device_inst *cm_device =
 				(struct cm_device_inst *)CM_DEVICE_INST;
 #endif
 
-#ifdef CONFIG_TI814X
-void config_dmm(const struct dmm_lisa_map_regs *regs)
-{
-	struct dmm_lisa_map_regs *hw_lisa_map_regs =
-				(struct dmm_lisa_map_regs *)DMM_BASE;
-
-	enable_dmm_clocks();
-
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
-
-	writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
-	writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
-	writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
-	writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
-}
-#endif
-
 static void config_vtp(int nr)
 {
 	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index c463c96c74c..d104f23b3e2 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -15,6 +15,7 @@
 #include <spl.h>
 #include <asm/global_data.h>
 #include <asm/omap_common.h>
+#include <asm/omap_sec_common.h>
 #include <asm/arch/omap.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
@@ -22,6 +23,7 @@
 #include <scsi.h>
 #include <i2c.h>
 #include <remoteproc.h>
+#include <image.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -181,7 +183,7 @@ void save_omap_boot_params(void)
 
 	gd->arch.omap_boot_mode = boot_mode;
 
-#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
+#if !defined(CONFIG_TI816X) && \
     !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
 
 	/* CH flags */
@@ -331,3 +333,17 @@ void arch_preboot_os(void)
 	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
 }
 #endif
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
+{
+	secure_boot_verify_image(p_image, p_size);
+}
+
+static void tee_image_process(ulong tee_image, size_t tee_size)
+{
+	secure_tee_install((u32)tee_image);
+}
+U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, tee_image_process);
+#endif
diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
index f76262bb0ce..24ddcdb9614 100644
--- a/arch/arm/mach-omap2/config_secure.mk
+++ b/arch/arm/mach-omap2/config_secure.mk
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index 312f868fbc7..a6a97af37d7 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -389,7 +389,7 @@ static void dra7_enable_ecc(u32 base, const struct emif_regs *regs)
 		/* Set region1 memory with 0 */
 		rgn_start = (regs->emif_ecc_address_range_1 &
 			     EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
-		rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+		rgn = rgn_start + CFG_SYS_SDRAM_BASE;
 		size = (regs->emif_ecc_address_range_1 &
 			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
 
@@ -400,7 +400,7 @@ static void dra7_enable_ecc(u32 base, const struct emif_regs *regs)
 		/* Set region2 memory with 0 */
 		rgn_start = (regs->emif_ecc_address_range_2 &
 			     EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16;
-		rgn = rgn_start + CONFIG_SYS_SDRAM_BASE;
+		rgn = rgn_start + CFG_SYS_SDRAM_BASE;
 		size = (regs->emif_ecc_address_range_2 &
 			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start;
 
@@ -1340,7 +1340,7 @@ void dmm_init(u32 base)
 
 	mapped_size = 0;
 	section_cnt = 3;
-	sys_addr = CONFIG_SYS_SDRAM_BASE;
+	sys_addr = CFG_SYS_SDRAM_BASE;
 	emif1_size = get_emif_mem_size(EMIF1_BASE);
 	emif2_size = get_emif_mem_size(EMIF2_BASE);
 	debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
@@ -1568,7 +1568,7 @@ void sdram_init(void)
 		size_prog = log_2_n_round_down(size_prog);
 		size_prog = (1 << size_prog);
 
-		size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+		size_detect = get_ram_size((long *)CFG_SYS_SDRAM_BASE,
 						size_prog);
 		/* Compare with the size programmed */
 		if (size_detect != size_prog) {
diff --git a/arch/arm/mach-omap2/mem-common.c b/arch/arm/mach-omap2/mem-common.c
index 2dcf0cf9c37..19197482aa4 100644
--- a/arch/arm/mach-omap2/mem-common.c
+++ b/arch/arm/mach-omap2/mem-common.c
@@ -124,25 +124,25 @@ void set_gpmc_cs0(int flash_type)
 #if defined(CONFIG_NOR)
 	case MTD_DEV_TYPE_NOR:
 		gpmc_regs = gpmc_regs_nor;
-		base = CONFIG_SYS_FLASH_BASE;
-		size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M :
-		      ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M :
-		      ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M  :
-		      ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M  :
+		base = CFG_SYS_FLASH_BASE;
+		size = (CFG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M :
+		      ((CFG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M :
+		      ((CFG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M  :
+		      ((CFG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M  :
 		                                              GPMC_SIZE_16M)));
 		break;
 #endif
 #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_CMD_NAND)
 	case MTD_DEV_TYPE_NAND:
 		gpmc_regs = gpmc_regs_nand;
-		base = CONFIG_SYS_NAND_BASE;
+		base = CFG_SYS_NAND_BASE;
 		size = GPMC_SIZE_16M;
 		break;
 #endif
 #if defined(CONFIG_CMD_ONENAND)
 	case MTD_DEV_TYPE_ONENAND:
 		gpmc_regs = gpmc_regs_onenand;
-		base = CONFIG_SYS_ONENAND_BASE;
+		base = CFG_SYS_ONENAND_BASE;
 		size = GPMC_SIZE_128M;
 		break;
 #endif
diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index 4c2f990b287..0787d192b69 100644
--- a/arch/arm/mach-omap2/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
@@ -1,7 +1,12 @@
 if OMAP54XX
 
+config IODELAY_RECALIBRATION
+	bool
+
 config DRA7XX
 	bool
+	select IODELAY_RECALIBRATION
+	select SYS_OMAP_ABE_SYSCK
 	help
 	  DRA7xx is an OMAP based SOC with Dual Core A-15s.
 
diff --git a/arch/arm/mach-omap2/sec-common.c b/arch/arm/mach-omap2/sec-common.c
index 0551bc125e8..64560b21e3f 100644
--- a/arch/arm/mach-omap2/sec-common.c
+++ b/arch/arm/mach-omap2/sec-common.c
@@ -198,12 +198,12 @@ u32 get_sec_mem_start(void)
 	 */
 	if (sec_mem_start == 0)
 		sec_mem_start =
-			(CONFIG_SYS_SDRAM_BASE + (
+			(CFG_SYS_SDRAM_BASE + (
 #if defined(CONFIG_OMAP54XX)
 			omap_sdram_size()
 #else
-			get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-				     CONFIG_MAX_RAM_BANK_SIZE)
+			get_ram_size((void *)CFG_SYS_SDRAM_BASE,
+				     CFG_MAX_RAM_BANK_SIZE)
 #endif
 			- sec_mem_size));
 	return sec_mem_start;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 00d91c10136..71fdf5bf487 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -27,7 +27,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
+static struct gptimer *timer_base = (struct gptimer *)CFG_SYS_TIMERBASE;
 static ulong get_timer_masked(void);
 
 /*