Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 44 insertions, 39 deletions

diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 9ec34ff992b..3eec9a61d66 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -28,9 +28,11 @@
 #include <net.h>
 #include <ide.h>
 #include <serial.h>
+#include <spi.h>
 #include <status_led.h>
 #include <asm/processor.h>
 #include <asm/u-boot-x86.h>
+#include <linux/compiler.h>
 
 #include <asm/init_helpers.h>
 
@@ -71,7 +73,7 @@ int init_baudrate_f(void)
 	return 0;
 }
 
-int calculate_relocation_address(void)
+__weak int calculate_relocation_address(void)
 {
 	ulong text_start = (ulong)&__text_start;
 	ulong bss_end = (ulong)&__bss_end;
@@ -83,51 +85,17 @@ int calculate_relocation_address(void)
 	 *       requirements
 	 */
 
-	/* Global Data is at top of available memory */
+	/* Stack is at top of available memory */
 	dest_addr = gd->ram_size;
-	dest_addr -= GENERATED_GBL_DATA_SIZE;
-	dest_addr &= ~15;
-	gd->new_gd_addr = dest_addr;
-
-	/* GDT is below Global Data */
-	dest_addr -= X86_GDT_SIZE;
-	dest_addr &= ~15;
-	gd->gdt_addr = dest_addr;
-
-	/* Stack is below GDT */
-	gd->start_addr_sp = dest_addr;
 
-	/* U-Boot is below the stack */
-	dest_addr -= CONFIG_SYS_STACK_SIZE;
+	/* U-Boot is at the top */
 	dest_addr -= (bss_end - text_start);
 	dest_addr &= ~15;
 	gd->relocaddr = dest_addr;
 	gd->reloc_off = (dest_addr - text_start);
 
-	return 0;
-}
-
-int copy_gd_to_ram_f_r(void)
-{
-	gd_t *ram_gd;
-
-	/*
-	 * Global data is still in temporary memory (the CPU cache).
-	 * calculate_relocation_address() has set gd->new_gd_addr to
-	 * where the global data lives in RAM but getting it there
-	 * safely is a bit tricky due to the 'F-Segment Hack' that
-	 * we need to use for x86
-	 */
-	ram_gd = (gd_t *)gd->new_gd_addr;
-	memcpy((void *)ram_gd, gd, sizeof(gd_t));
-
-	/*
-	 * Reload the Global Descriptor Table so FS points to the
-	 * in-RAM copy of Global Data (calculate_relocation_address()
-	 * has already calculated the in-RAM location of the GDT)
-	 */
-	ram_gd->gd_addr = (ulong)ram_gd;
-	init_gd(ram_gd, (u64 *)gd->gdt_addr);
+	/* Stack is at the bottom, so it can grow down */
+	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
 
 	return 0;
 }
@@ -195,3 +163,40 @@ int set_load_addr_r(void)
 
 	return 0;
 }
+
+int init_func_spi(void)
+{
+	puts("SPI:   ");
+	spi_init();
+	puts("ready\n");
+	return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int find_fdt(void)
+{
+#ifdef CONFIG_OF_EMBED
+	/* Get a pointer to the FDT */
+	gd->fdt_blob = _binary_dt_dtb_start;
+#elif defined CONFIG_OF_SEPARATE
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
+#endif
+	/* Allow the early environment to override the fdt address */
+	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+						(uintptr_t)gd->fdt_blob);
+
+	return 0;
+}
+
+int prepare_fdt(void)
+{
+	/* For now, put this check after the console is ready */
+	if (fdtdec_prepare_fdt()) {
+		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+			"doc/README.fdt-control");
+	}
+
+	return 0;
+}
+#endif