Merge branch '2021-07-07-remove-non-migrated-platforms'

- Remove a large number of platforms that did not migrate to DM_PCI or
  DM_USB by 2 years past the migration deadline and do not have a
  migration imminent.

1 files changed, 0 insertions, 70 deletions

diff --git a/board/keymile/kmp204x/ddr.c b/board/keymile/kmp204x/ddr.c
deleted file mode 100644
index 77a00c55c95..00000000000
--- a/board/keymile/kmp204x/ddr.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013 Keymile AG
- * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-
-	/* automatic calibration for nb of cycles between read and DQS pre */
-	popts->cpo_override = 0xFF;
-
-	/* 1/2 clk delay between wr command and data strobe */
-	popts->write_data_delay = 4;
-	/* clk lauched 1/2 applied cylcle after address command */
-	popts->clk_adjust = 4;
-	/* 1T timing: command/address held for only 1 cycle */
-	popts->twot_en = 0;
-
-	/* we have only one module, half str should be OK */
-	popts->half_strength_driver_enable = 1;
-
-	/* wrlvl values overridden as recommended by ddr init func */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-	popts->wrlvl_start = 0x6;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm;
-}
-
-int dram_init(void)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing with SPD\n");
-
-	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	debug("    DDR: ");
-	gd->ram_size = dram_size;
-
-	return 0;
-}