Merge tag 'u-boot-imx-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- i.MX NAND and nandbxb for i.MX8M
- imx8MM : new beacon devkit
- imx8MQ : new pico-imx8MQ
- imx8QXP : extend to enable M4, fixes
- add thermal support
- caches in SPL (missing board)
- Fixes

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/685391011

1 files changed, 146 insertions, 0 deletions

diff --git a/board/technexion/pico-imx8mq/pico-imx8mq.c b/board/technexion/pico-imx8mq/pico-imx8mq.c
new file mode 100644
index 00000000000..822357bb12c
--- /dev/null
+++ b/board/technexion/pico-imx8mq/pico-imx8mq.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <env.h>
+#include <init.h>
+#include <malloc.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm-generic/gpio.h>
+#include <fsl_esdhc_imx.h>
+#include <mmc.h>
+#include <asm/arch/imx8mq_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch/clock.h>
+#include <spl.h>
+#include <power/pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
+
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart_pads[] = {
+	IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+	set_wdog_reset(wdog);
+
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	int ddr_size = readl(M4_BOOTROM_BASE_ADDR);
+
+	if (ddr_size == 0x4)
+		gd->ram_size = 0x100000000;
+	else if (ddr_size == 0x3)
+		gd->ram_size = 0xc0000000;
+	else if (ddr_size == 0x2)
+		gd->ram_size = 0x80000000;
+	else if (ddr_size == 0x1)
+		gd->ram_size = 0x40000000;
+	else
+		printf("Unknown DDR type!!!\n");
+
+	/* rom_pointer[1] contains the size of TEE occupies */
+	if (rom_pointer[1])
+		gd->ram_size -= rom_pointer[1];
+
+	return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+#define FEC_RST_PAD IMX_GPIO_NR(1, 9)
+#define FEC_PWR_PAD IMX_GPIO_NR(1, 0)
+static iomux_v3_cfg_t const fec1_pads[] = {
+	/* Reset */
+	IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* Power */
+	IMX8MQ_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+
+	gpio_request(IMX_GPIO_NR(1, 0), "fec1_pwr");
+	gpio_direction_output(IMX_GPIO_NR(1, 0), 1);
+	udelay(500);
+
+	gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst");
+	gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
+	udelay(500);
+	gpio_direction_output(IMX_GPIO_NR(1, 9), 1);
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *gpr =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	setup_iomux_fec();
+
+	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
+	clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
+	return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	/* enable rgmii rxc skew and phy mode select to RGMII copper */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	env_set("board_rev", "iMX8MQ");
+#endif
+	return 0;
+}