Merge branch '2021-07-07-remove-non-migrated-platforms'

- Remove a large number of platforms that did not migrate to DM_PCI or
  DM_USB by 2 years past the migration deadline and do not have a
  migration imminent.

1 files changed, 0 insertions, 68 deletions

diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c
deleted file mode 100644
index c142bec406e..00000000000
--- a/board/xes/xpedite520x/ddr.c
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
-{
-	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
-
-	/* We use soldered memory, but use an SPD EEPROM to describe it.
-	 * The SPD has an unspecified dimm type, but the DDR2 initialization
-	 * code requires a specific type to be specified. This sets the type
-	 * as a standard unregistered SO-DIMM. */
-	if (spd->dimm_type == 0) {
-		spd->dimm_type = 0x4;
-		((uchar *)spd)[63] += 0x4;
-	}
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 9;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}