Merge branch '2023-01-24-bootstd-allow-migration-from-distro_bootcmd-script'

To quote the author:
So far, standard boot does not replicate all the of the functionality
of the distro_bootcmd scripts. In particular it lacks some bootdevs and
some of the bootmeths are incomplete.

Also there is currently no internal mechanism to enumerate buses in order
to discover bootdevs, e.g. with USB.

This series addresses these shortcomings:

- Adds the concept of a 'bootdev hunter' to enumerate buses, etc. in an
  effort to find bootdevs of a certain priority
- Adds bootdevs for SCSI, IDE, NVMe, virtio, SPI flash
- Handles PXE and DHCP properly
- Supports reading the device tree with EFI and reading scripts from the
  network

It also tidies up label processing, so it is possible to use:

   bootflow scan mmc2

to scan just one MMC device (with BOOTSTD_FULL).

As before this implementation still relies on CONFIG_CMDLINE being
enabled, mostly for the network stack. Further work would be required to
disentangle that.

Quite a few tests are added but there are some gaps:

- SPI flash bootdev
- EFI FDT loading

Note that SATA works via SCSI (CONFIG_SCSI_AHCI) and does not use
driver model. Only pogo_v4 seems to be affected. Probably all thats is
needed is to call bootdev_setup_sibling_blk() in the Marvell SATA driver.

Also, while it would be possible to init MMC in a bootdev hunter, there is
no point since U-Boot always inits MMC on startup, if present.

With this series it should be possible to migrate boards to standard boot
by removing the inclusion of config_distro_bootcmd.h and instead adding
a suitable value for boot_targets to the environment, e.g.:

   boot_targets=mmc1 mmc0 nvme scsi usb pxe dhcp spi

Thus it is possible to boot automatically without scripts and boards can
use a text-based environment instead of the config.h files.

To demonstrate this, rockpro64-rk3399 is migrated to standard boot in this
series. Full migration could probably be automated using a script, similar
in concept to moveconfig:

   - obtain the board environment via 'make u-boot-initial-env'
   - get the value of "boot_targets"
   - drop config_distro_bootcmd.h from the config.h file
   - rebuild again to get the environment without distro scripts
   - write the environment (adding boot_targets) to board.env
   - remove CONFIG_EXTRA_ENV_SETTINGS from the config.h file

1 files changed, 44 insertions, 4 deletions

diff --git a/doc/usage/cmd/bootdev.rst b/doc/usage/cmd/bootdev.rst
index 5e02e32c514..6c68d0bf840 100644
--- a/doc/usage/cmd/bootdev.rst
+++ b/doc/usage/cmd/bootdev.rst
@@ -8,9 +8,10 @@ Synopis
 
 ::
 
-    bootdev list [-p]      - list all available bootdevs (-p to probe)\n"
-    bootdev select <bm>    - select a bootdev by name\n"
-    bootdev info [-p]      - show information about a bootdev";
+    bootdev list [-p]        - list all available bootdevs (-p to probe)
+    bootdev hunt [-l|<spec>] - use hunt drivers to find bootdevs
+    bootdev select <bm>      - select a bootdev by name
+    bootdev info [-p]        - show information about a bootdev
 
 Description
 -----------
@@ -63,6 +64,17 @@ Name:
     with `.bootdev`
 
 
+bootdev hunt
+~~~~~~~~~~~~
+
+This hunts for new bootdevs, or shows a list of hunters.
+
+Use `-l` to list the available bootdev hunters.
+
+To run hunters, specify the name of the hunter to run, e.g. "mmc". If no
+name is provided, all hunters are run.
+
+
 bootdev select
 ~~~~~~~~~~~~~~~~~
 
@@ -83,7 +95,7 @@ This shows information on the current bootdev, with the format looking like
 this:
 
 =========  =======================
-Name       mmc@7e202000.bootdev
+Name       `mmc@7e202000.bootdev`
 Sequence   0
 Status     Probed
 Uclass     mmc
@@ -128,6 +140,34 @@ one of them::
    Uclass:    mmc
    Bootflows: 1 (1 valid)
 
+This shows using one of the available hunters, then listing them::
+
+    => bootdev hunt usb
+    Hunting with: usb
+    Bus usb@1: scanning bus usb@1 for devices...
+    3 USB Device(s) found
+    => bootdev hunt -l
+    Prio  Used  Uclass           Hunter
+    ----  ----  ---------------  ---------------
+    6        ethernet         eth_bootdev
+    1        simple_bus       (none)
+    5        ide              ide_bootdev
+    2        mmc              mmc_bootdev
+    4        nvme             nvme_bootdev
+    4        scsi             scsi_bootdev
+    4        spi_flash        sf_bootdev
+    5     *  usb              usb_bootdev
+    4        virtio           virtio_bootdev
+    (total hunters: 9)
+    => usb stor
+    Device 0: Vendor: sandbox Rev: 1.0 Prod: flash
+                Type: Hard Disk
+                Capacity: 4.0 MB = 0.0 GB (8192 x 512)
+    Device 1: Vendor: sandbox Rev: 1.0 Prod: flash
+                Type: Hard Disk
+                Capacity: 0.0 MB = 0.0 GB (1 x 512)
+    =>
+
 
 Return value
 ------------