diff options
| author | Jonas Karlman <jonas@kwiboo.se> | 2024-04-30 15:30:23 +0000 |
|---|---|---|
| committer | Kever Yang <kever.yang@rock-chips.com> | 2024-05-07 15:56:08 +0800 |
| commit | fa903919d23fb2467730e864321180f7442d6d71 (patch) | |
| tree | ed4765922fbd7fcbcb2600b07c17eb0ccc34ea3f /drivers/ddr/imx/imx8ulp/ddr_init.c | |
| parent | cc87730e404c7e65ecf19af89a8b80063494a296 (diff) | |
rockchip: rk3399: Include uart related pinctrl nodes in TPL/SPL
The initial serial console UART iomux is typically configured in
board_debug_uart_init() at TPL stage on Rockchip platform.
Later stages typically use pinctrl driver to configure iomux UART once
again based on the control FDT.
Include uart related pinctrl nodes in TPL/SPL control FDT to make it
possible for pinctrl driver to configure UART iomux at TPL/SPL stage.
Following debug log message may also be seen at U-Boot pre-reloc stage:
ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
This can be resolved by including bootph prop for U-Bood pre-reloc
phase (bootph-some-ram or bootph-all). However, this has intentionally
been excluded due to including it unnecessarily slows down boot around
200-400 ms.
Also add the clock-frequency prop similar to what has been done for
other Rockchip SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'drivers/ddr/imx/imx8ulp/ddr_init.c')
0 files changed, 0 insertions, 0 deletions