gpio: Add support for Qualcomm PM8916 gpios

This driver supports GPIOs present on PM8916 PMIC.
There are 2 device drivers inside:
- GPIO driver (4 "generic" GPIOs)
- Keypad driver that presents itself as GPIO with 2 inputs (power and reset)

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

3 files changed, 313 insertions, 0 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4d9e74c009e..f56a60621ff 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -69,6 +69,16 @@ config MSM_GPIO
 	  - APQ8016
 	  - MSM8916
 
+config PM8916_GPIO
+	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
+	depends on DM_GPIO && PMIC_PM8916
+	help
+	  Support for GPIO pins and power/reset buttons found on
+	  Qualcomm PM8916 PMIC.
+	  Default name for GPIO bank is "pm8916".
+	  Power and reset buttons are placed in "pm8916_key" bank and
+          have gpio numbers 0 and 1 respectively.
+
 config ROCKCHIP_GPIO
 	bool "Rockchip GPIO driver"
 	depends on DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4162c3c702d..4f071c45172 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -51,3 +51,4 @@ obj-$(CONFIG_HIKEY_GPIO)	+= hi6220_gpio.o
 obj-$(CONFIG_PIC32_GPIO)	+= pic32_gpio.o
 obj-$(CONFIG_MVEBU_GPIO)	+= mvebu_gpio.o
 obj-$(CONFIG_MSM_GPIO)		+= msm_gpio.o
+obj-$(CONFIG_PM8916_GPIO)	+= pm8916_gpio.o
diff --git a/drivers/gpio/pm8916_gpio.c b/drivers/gpio/pm8916_gpio.c
new file mode 100644
index 00000000000..1abab7fef17
--- /dev/null
+++ b/drivers/gpio/pm8916_gpio.c
@@ -0,0 +1,302 @@
+/*
+ * Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <power/pmic.h>
+#include <spmi/spmi.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/bitops.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Register offset for each gpio */
+#define REG_OFFSET(x)          ((x) * 0x100)
+
+/* Register maps */
+
+/* Type and subtype are shared for all pm8916 peripherals */
+#define REG_TYPE               0x4
+#define REG_SUBTYPE            0x5
+
+#define REG_STATUS             0x08
+#define REG_STATUS_VAL_MASK    0x1
+
+/* MODE_CTL */
+#define REG_CTL           0x40
+#define REG_CTL_MODE_MASK       0x70
+#define REG_CTL_MODE_INPUT      0x00
+#define REG_CTL_MODE_INOUT      0x20
+#define REG_CTL_MODE_OUTPUT     0x10
+#define REG_CTL_OUTPUT_MASK     0x0F
+
+#define REG_DIG_VIN_CTL        0x41
+#define REG_DIG_VIN_VIN0       0
+
+#define REG_DIG_PULL_CTL       0x42
+#define REG_DIG_PULL_NO_PU     0x5
+
+#define REG_DIG_OUT_CTL        0x45
+#define REG_DIG_OUT_CTL_CMOS   (0x0 << 4)
+#define REG_DIG_OUT_CTL_DRIVE_L 0x1
+
+#define REG_EN_CTL             0x46
+#define REG_EN_CTL_ENABLE      (1 << 7)
+
+struct pm8916_gpio_bank {
+	uint16_t pid; /* Peripheral ID on SPMI bus */
+};
+
+static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
+				     bool input, int value)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+	int ret;
+
+	/* Disable the GPIO */
+	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
+			      REG_EN_CTL_ENABLE, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Select the mode */
+	if (input)
+		ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
+				     REG_CTL_MODE_INPUT);
+	else
+		ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
+				     REG_CTL_MODE_INOUT | (value ? 1 : 0));
+	if (ret < 0)
+		return ret;
+
+	/* Set the right pull (no pull) */
+	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
+			     REG_DIG_PULL_NO_PU);
+	if (ret < 0)
+		return ret;
+
+	/* Configure output pin drivers if needed */
+	if (!input) {
+		/* Select the VIN - VIN0, pin is input so it doesn't matter */
+		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
+				     REG_DIG_VIN_VIN0);
+		if (ret < 0)
+			return ret;
+
+		/* Set the right dig out control */
+		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
+				     REG_DIG_OUT_CTL_CMOS |
+				     REG_DIG_OUT_CTL_DRIVE_L);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Enable the GPIO */
+	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
+			       REG_EN_CTL_ENABLE);
+}
+
+static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+	return pm8916_gpio_set_direction(dev, offset, true, 0);
+}
+
+static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
+					int value)
+{
+	return pm8916_gpio_set_direction(dev, offset, false, value);
+}
+
+static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+	int reg;
+
+	/* Set the output value of the gpio */
+	reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
+	if (reg < 0)
+		return reg;
+
+	switch (reg & REG_CTL_MODE_MASK) {
+	case REG_CTL_MODE_INPUT:
+		return GPIOF_INPUT;
+	case REG_CTL_MODE_INOUT: /* Fallthrough */
+	case REG_CTL_MODE_OUTPUT:
+		return GPIOF_OUTPUT;
+	default:
+		return GPIOF_UNKNOWN;
+	}
+}
+
+static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+	int reg;
+
+	reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
+	if (reg < 0)
+		return reg;
+
+	return !!(reg & REG_STATUS_VAL_MASK);
+}
+
+static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
+				 int value)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+
+	/* Set the output value of the gpio */
+	return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
+			       REG_CTL_OUTPUT_MASK, !!value);
+}
+
+static const struct dm_gpio_ops pm8916_gpio_ops = {
+	.direction_input	= pm8916_gpio_direction_input,
+	.direction_output	= pm8916_gpio_direction_output,
+	.get_value		= pm8916_gpio_get_value,
+	.set_value		= pm8916_gpio_set_value,
+	.get_function		= pm8916_gpio_get_function,
+};
+
+static int pm8916_gpio_probe(struct udevice *dev)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	int reg;
+
+	priv->pid = dev_get_addr(dev);
+	if (priv->pid == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	/* Do a sanity check */
+	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
+	if (reg != 0x10)
+		return -ENODEV;
+
+	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
+	if (reg != 0x5)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pm8916_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_priv->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+					     "gpio-count", 0);
+	uc_priv->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset,
+					 "gpio-bank-name", NULL);
+	if (uc_priv->bank_name == NULL)
+		uc_priv->bank_name = "pm8916";
+
+	return 0;
+}
+
+static const struct udevice_id pm8916_gpio_ids[] = {
+	{ .compatible = "qcom,pm8916-gpio" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpio_pm8916) = {
+	.name	= "gpio_pm8916",
+	.id	= UCLASS_GPIO,
+	.of_match = pm8916_gpio_ids,
+	.ofdata_to_platdata = pm8916_gpio_ofdata_to_platdata,
+	.probe	= pm8916_gpio_probe,
+	.ops	= &pm8916_gpio_ops,
+	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
+};
+
+
+/* Add pmic buttons as GPIO as well - there is no generic way for now */
+#define PON_INT_RT_STS                        0x10
+#define KPDPWR_ON_INT_BIT                     0
+#define RESIN_ON_INT_BIT                      1
+
+static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
+{
+	return GPIOF_INPUT;
+}
+
+static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+
+	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);
+
+	if (reg < 0)
+		return 0;
+
+	switch (offset) {
+	case 0: /* Power button */
+		return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
+		break;
+	case 1: /* Reset button */
+	default:
+		return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
+		break;
+	}
+}
+
+static const struct dm_gpio_ops pm8941_pwrkey_ops = {
+	.get_value		= pm8941_pwrkey_get_value,
+	.get_function		= pm8941_pwrkey_get_function,
+};
+
+static int pm8941_pwrkey_probe(struct udevice *dev)
+{
+	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	int reg;
+
+	priv->pid = dev_get_addr(dev);
+	if (priv->pid == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	/* Do a sanity check */
+	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
+	if (reg != 0x1)
+		return -ENODEV;
+
+	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
+	if (reg != 0x1)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pm8941_pwrkey_ofdata_to_platdata(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_priv->gpio_count = 2;
+	if (uc_priv->bank_name == NULL)
+		uc_priv->bank_name = "pm8916_key";
+
+	return 0;
+}
+
+static const struct udevice_id pm8941_pwrkey_ids[] = {
+	{ .compatible = "qcom,pm8916-pwrkey" },
+	{ }
+};
+
+U_BOOT_DRIVER(pwrkey_pm8941) = {
+	.name	= "pwrkey_pm8916",
+	.id	= UCLASS_GPIO,
+	.of_match = pm8941_pwrkey_ids,
+	.ofdata_to_platdata = pm8941_pwrkey_ofdata_to_platdata,
+	.probe	= pm8941_pwrkey_probe,
+	.ops	= &pm8941_pwrkey_ops,
+	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
+};