Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 44 insertions, 19 deletions

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 5ffd8c59e6e..72e8ce6da42 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -868,7 +868,7 @@ static void mmc_set_bus_width(struct mmc *mmc, uint width)
 
 static int mmc_startup(struct mmc *mmc)
 {
-	int err, width;
+	int err;
 	uint mult, freq;
 	u64 cmult, csize, capacity;
 	struct mmc_cmd cmd;
@@ -1087,21 +1087,44 @@ static int mmc_startup(struct mmc *mmc)
 		else
 			mmc->tran_speed = 25000000;
 	} else {
-		width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS) >>
-			 MMC_MODE_WIDTH_BITS_SHIFT);
-		for (; width >= 0; width--) {
-			/* Set the card to use 4 bit*/
+		int idx;
+
+		/* An array of possible bus widths in order of preference */
+		static unsigned ext_csd_bits[] = {
+			EXT_CSD_BUS_WIDTH_8,
+			EXT_CSD_BUS_WIDTH_4,
+			EXT_CSD_BUS_WIDTH_1,
+		};
+
+		/* An array to map CSD bus widths to host cap bits */
+		static unsigned ext_to_hostcaps[] = {
+			[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
+			[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
+		};
+
+		/* An array to map chosen bus width to an integer */
+		static unsigned widths[] = {
+			8, 4, 1,
+		};
+
+		for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
+			unsigned int extw = ext_csd_bits[idx];
+
+			/*
+			 * Check to make sure the controller supports
+			 * this bus width, if it's more than 1
+			 */
+			if (extw != EXT_CSD_BUS_WIDTH_1 &&
+					!(mmc->host_caps & ext_to_hostcaps[extw]))
+				continue;
+
 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
-					EXT_CSD_BUS_WIDTH, width);
+					EXT_CSD_BUS_WIDTH, extw);
 
 			if (err)
 				continue;
 
-			if (!width) {
-				mmc_set_bus_width(mmc, 1);
-				break;
-			} else
-				mmc_set_bus_width(mmc, 4 * width);
+			mmc_set_bus_width(mmc, widths[idx]);
 
 			err = mmc_send_ext_csd(mmc, test_csd);
 			if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
@@ -1115,7 +1138,7 @@ static int mmc_startup(struct mmc *mmc)
 				 && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
 					&test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
 
-				mmc->card_caps |= width;
+				mmc->card_caps |= ext_to_hostcaps[extw];
 				break;
 			}
 		}
@@ -1135,13 +1158,15 @@ static int mmc_startup(struct mmc *mmc)
 	mmc->block_dev.type = 0;
 	mmc->block_dev.blksz = mmc->read_bl_len;
 	mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
-	sprintf(mmc->block_dev.vendor, "Man %06x Snr %08x", mmc->cid[0] >> 8,
-			(mmc->cid[2] << 8) | (mmc->cid[3] >> 24));
-	sprintf(mmc->block_dev.product, "%c%c%c%c%c", mmc->cid[0] & 0xff,
-			(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
-			(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff);
-	sprintf(mmc->block_dev.revision, "%d.%d", mmc->cid[2] >> 28,
-			(mmc->cid[2] >> 24) & 0xf);
+	sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
+		mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
+		(mmc->cid[3] >> 16) & 0xffff);
+	sprintf(mmc->block_dev.product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
+		(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
+		(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
+		(mmc->cid[2] >> 24) & 0xff);
+	sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
+		(mmc->cid[2] >> 16) & 0xf);
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
 	init_part(&mmc->block_dev);
 #endif