Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 155 insertions, 33 deletions

diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index c4752a7cbf8..2ba0c5ef956 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -50,8 +50,8 @@
 #include <nand.h>
 #include <jffs2/jffs2.h>
 
-typedef struct erase_info erase_info_t;
-typedef struct mtd_info	  mtd_info_t;
+typedef struct erase_info	erase_info_t;
+typedef struct mtd_info		mtd_info_t;
 
 /* support only for native endian JFFS2 */
 #define cpu_to_je16(x) (x)
@@ -59,7 +59,7 @@ typedef struct mtd_info	  mtd_info_t;
 
 /**
  * nand_erase_opts: - erase NAND flash with support for various options
- *		      (jffs2 formating)
+ *		      (jffs2 formatting)
  *
  * @param meminfo	NAND device to erase
  * @param opts		options,  @see struct nand_erase_options
@@ -80,8 +80,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	struct mtd_oob_ops oob_opts;
 	struct nand_chip *chip = meminfo->priv;
 
-	if ((opts->offset & (meminfo->writesize - 1)) != 0) {
-		printf("Attempt to erase non page aligned data\n");
+	if ((opts->offset & (meminfo->erasesize - 1)) != 0) {
+		printf("Attempt to erase non block-aligned data\n");
 		return -1;
 	}
 
@@ -94,8 +94,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	erase_length = lldiv(opts->length + meminfo->erasesize - 1,
 			     meminfo->erasesize);
 
-	cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
-	cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+	cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
+	cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
 	cleanmarker.totlen = cpu_to_je32(8);
 
 	/* scrub option allows to erase badblock. To prevent internal
@@ -118,7 +118,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	     erased_length < erase_length;
 	     erase.addr += meminfo->erasesize) {
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
 		if (!opts->scrub && bbtest) {
 			int ret = meminfo->block_isbad(meminfo, erase.addr);
@@ -259,7 +259,7 @@ int nand_lock(struct mtd_info *mtd, int tight)
  *			   flash
  *
  * @param mtd		nand mtd instance
- * @param offset	page address to query (muss be page aligned!)
+ * @param offset	page address to query (must be page-aligned!)
  *
  * @return		-1 in case of error
  *			>0 lock status:
@@ -281,7 +281,7 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
 
 
 	if ((offset & (mtd->writesize - 1)) != 0) {
-		printf ("nand_get_lock_status: "
+		printf("nand_get_lock_status: "
 			"Start address must be beginning of "
 			"nand page!\n");
 		ret = -1;
@@ -332,20 +332,20 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
 	/* check the WP bit */
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 	if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
-		printf ("nand_unlock: Device is write protected!\n");
+		printf("nand_unlock: Device is write protected!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if ((start & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Start address must be beginning of "
+		printf("nand_unlock: Start address must be beginning of "
 			"nand block!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Length must be a multiple of nand block "
+		printf("nand_unlock: Length must be a multiple of nand block "
 			"size %08x!\n", mtd->erasesize);
 		ret = -1;
 		goto out;
@@ -485,7 +485,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		pages = nand->erasesize / nand->writesize;
 		blocksize = (pages * nand->oobsize) + nand->erasesize;
 		if (*length % (nand->writesize + nand->oobsize)) {
-			printf ("Attempt to write incomplete page"
+			printf("Attempt to write incomplete page"
 				" in yaffs mode\n");
 			return -EINVAL;
 		}
@@ -507,25 +507,25 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	 * partition boundary).  So don't try to handle that.
 	 */
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to write non page aligned data\n");
+		printf("Attempt to write non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to write outside the flash area\n");
+		printf("Attempt to write outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
-		rval = nand_write (nand, offset, length, buffer);
+		rval = nand_write(nand, offset, length, buffer);
 		if (rval == 0)
 			return 0;
 
 		*length = 0;
-		printf ("NAND write to offset %llx failed %d\n",
+		printf("NAND write to offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -534,10 +534,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t write_size, truncated_write_size;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skip bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skip bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -592,7 +592,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		}
 
 		if (rval != 0) {
-			printf ("NAND write to offset %llx failed %d\n",
+			printf("NAND write to offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_write;
 			return rval;
@@ -608,13 +608,13 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
  * nand_read_skip_bad:
  *
  * Read image from NAND flash.
- * Blocks that are marked bad are skipped and the next block is readen
+ * Blocks that are marked bad are skipped and the next block is read
  * instead as long as the image is short enough to fit even after skipping the
  * bad blocks.
  *
  * @param nand NAND device
  * @param offset offset in flash
- * @param length buffer length, on return holds remaining bytes to read
+ * @param length buffer length, on return holds number of read bytes
  * @param buffer buffer to write to
  * @return 0 in case of success
  */
@@ -627,25 +627,25 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	int need_skip;
 
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to read non page aligned data\n");
+		printf("Attempt to read non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to read outside the flash area\n");
+		printf("Attempt to read outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip) {
-		rval = nand_read (nand, offset, length, buffer);
+		rval = nand_read(nand, offset, length, buffer);
 		if (!rval || rval == -EUCLEAN)
 			return 0;
 
 		*length = 0;
-		printf ("NAND read from offset %llx failed %d\n",
+		printf("NAND read from offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -654,10 +654,10 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t read_length;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skipping bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skipping bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -668,9 +668,9 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			read_length = nand->erasesize - block_offset;
 
-		rval = nand_read (nand, offset, &read_length, p_buffer);
+		rval = nand_read(nand, offset, &read_length, p_buffer);
 		if (rval && rval != -EUCLEAN) {
-			printf ("NAND read from offset %llx failed %d\n",
+			printf("NAND read from offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_read;
 			return rval;
@@ -683,3 +683,125 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 	return 0;
 }
+
+#ifdef CONFIG_CMD_NAND_TORTURE
+
+/**
+ * check_pattern:
+ *
+ * Check if buffer contains only a certain byte pattern.
+ *
+ * @param buf buffer to check
+ * @param patt the pattern to check
+ * @param size buffer size in bytes
+ * @return 1 if there are only patt bytes in buf
+ *         0 if something else was found
+ */
+static int check_pattern(const u_char *buf, u_char patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (buf[i] != patt)
+			return 0;
+	return 1;
+}
+
+/**
+ * nand_torture:
+ *
+ * Torture a block of NAND flash.
+ * This is useful to determine if a block that caused a write error is still
+ * good or should be marked as bad.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @return 0 if the block is still good
+ */
+int nand_torture(nand_info_t *nand, loff_t offset)
+{
+	u_char patterns[] = {0xa5, 0x5a, 0x00};
+	struct erase_info instr = {
+		.mtd = nand,
+		.addr = offset,
+		.len = nand->erasesize,
+	};
+	size_t retlen;
+	int err, ret = -1, i, patt_count;
+	u_char *buf;
+
+	if ((offset & (nand->erasesize - 1)) != 0) {
+		puts("Attempt to torture a block at a non block-aligned offset\n");
+		return -EINVAL;
+	}
+
+	if (offset + nand->erasesize > nand->size) {
+		puts("Attempt to torture a block outside the flash area\n");
+		return -EINVAL;
+	}
+
+	patt_count = ARRAY_SIZE(patterns);
+
+	buf = malloc(nand->erasesize);
+	if (buf == NULL) {
+		puts("Out of memory for erase block buffer\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < patt_count; i++) {
+		err = nand->erase(nand, &instr);
+		if (err) {
+			printf("%s: erase() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		/* Make sure the block contains only 0xff bytes */
+		err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+		if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+			printf("%s: read() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = check_pattern(buf, 0xff, nand->erasesize);
+		if (!err) {
+			printf("Erased block at 0x%llx, but a non-0xff byte was found\n",
+				offset);
+			ret = -EIO;
+			goto out;
+		}
+
+		/* Write a pattern and check it */
+		memset(buf, patterns[i], nand->erasesize);
+		err = nand->write(nand, offset, nand->erasesize, &retlen, buf);
+		if (err || retlen != nand->erasesize) {
+			printf("%s: write() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+		if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+			printf("%s: read() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = check_pattern(buf, patterns[i], nand->erasesize);
+		if (!err) {
+			printf("Pattern 0x%.2x checking failed for block at "
+					"0x%llx\n", patterns[i], offset);
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	ret = 0;
+
+out:
+	free(buf);
+	return ret;
+}
+
+#endif