Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi

- Support Infineon S28HS02GT (Takahiro)

1 files changed, 85 insertions, 139 deletions

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 3f5f3c89ac1..f86003ca8c0 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -331,18 +331,42 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy,
 				 u8 *val)
 {
 	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDAR, 1),
-			   SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
-			   SPI_MEM_OP_DUMMY(dummy / 8, 1),
-			   SPI_MEM_OP_DATA_IN(1, NULL, 1));
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 0),
+			   SPI_MEM_OP_DUMMY(dummy, 0),
+			   SPI_MEM_OP_DATA_IN(1, NULL, 0));
+	u8 buf[2];
+	int ret;
+
+	spi_nor_setup_op(nor, &op, nor->reg_proto);
+
+	/*
+	 * In Octal DTR mode, the number of address bytes is always 4 regardless
+	 * of addressing mode setting.
+	 */
+	if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR)
+		op.addr.nbytes = 4;
+
+	/*
+	 * We don't want to read only one byte in DTR mode. So, read 2 and then
+	 * discard the second byte.
+	 */
+	if (spi_nor_protocol_is_dtr(nor->reg_proto))
+		op.data.nbytes = 2;
 
-	return spi_nor_read_write_reg(nor, &op, val);
+	ret = spi_nor_read_write_reg(nor, &op, buf);
+	if (ret)
+		return ret;
+
+	*val = buf[0];
+
+	return 0;
 }
 
 static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val)
 {
 	struct spi_mem_op op =
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRAR, 1),
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1),
 			   SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1),
 			   SPI_MEM_OP_NO_DUMMY,
 			   SPI_MEM_OP_DATA_OUT(1, NULL, 1));
@@ -714,7 +738,7 @@ static int set_4byte(struct spi_nor *nor, const struct flash_info *info,
  */
 static int spansion_sr_ready(struct spi_nor *nor, u32 addr_base, u8 dummy)
 {
-	u32 reg_addr = addr_base + SPINOR_REG_ADDR_STR1V;
+	u32 reg_addr = addr_base + SPINOR_REG_CYPRESS_STR1V;
 	u8 sr;
 	int ret;
 
@@ -728,7 +752,7 @@ static int spansion_sr_ready(struct spi_nor *nor, u32 addr_base, u8 dummy)
 		else
 			dev_dbg(nor->dev, "Programming Error occurred\n");
 
-		nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0);
+		nor->write_reg(nor, SPINOR_OP_CYPRESS_CLPEF, NULL, 0);
 		return -EIO;
 	}
 
@@ -1856,7 +1880,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
 static int spansion_quad_enable_volatile(struct spi_nor *nor, u32 addr_base,
 					 u8 dummy)
 {
-	u32 addr = addr_base + SPINOR_REG_ADDR_CFR1V;
+	u32 addr = addr_base + SPINOR_REG_CYPRESS_CFR1V;
 
 	u8 cr;
 	int ret;
@@ -3293,11 +3317,11 @@ static int s25fs_s_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * Read CR3V to check if uniform sector is selected. If not, assign an
 	 * erase hook that supports non-uniform erase.
 	 */
-	ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V,
+	ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V,
 				    S25FS_S_RDAR_DUMMY, &cfr3v);
 	if (ret)
 		return ret;
-	if (!(cfr3v & CFR3V_UNHYSA))
+	if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_UNISECT))
 		nor->erase = s25fs_s_erase_non_uniform;
 
 	return spi_nor_default_setup(nor, info, params);
@@ -3346,13 +3370,13 @@ static struct spi_nor_fixups s25fs_s_fixups = {
 	.post_sfdp = s25fs_s_post_sfdp_fixup,
 };
 
-static int s25_mdp_ready(struct spi_nor *nor)
+static int s25_s28_mdp_ready(struct spi_nor *nor)
 {
 	u32 addr;
 	int ret;
 
 	for (addr = 0; addr < nor->mtd.size; addr += SZ_128M) {
-		ret = spansion_sr_ready(nor, addr, 0);
+		ret = spansion_sr_ready(nor, addr, nor->rdsr_dummy);
 		if (!ret)
 			return ret;
 	}
@@ -3374,15 +3398,15 @@ static int s25_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
-static int s25_erase_non_uniform(struct spi_nor *nor, loff_t addr)
+static int s25_s28_erase_non_uniform(struct spi_nor *nor, loff_t addr)
 {
 	/* Support 32 x 4KB sectors at bottom */
 	return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0,
 					  SZ_128K);
 }
 
-static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
-		     const struct spi_nor_flash_parameter *params)
+static int s25_s28_setup(struct spi_nor *nor, const struct flash_info *info,
+			 const struct spi_nor_flash_parameter *params)
 {
 	int ret;
 	u8 cr;
@@ -3396,7 +3420,8 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * uniform 128KB only due to complexity of non-uniform layout.
 	 */
 	if (nor->info->id[4] == S25FS256T_ID4) {
-		ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_ARCFN, 8, &cr);
+		ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_ARCFN, 8,
+					    &cr);
 		if (ret)
 			return ret;
 
@@ -3410,31 +3435,31 @@ static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
 	 * Read CFR3V to check if uniform sector is selected. If not, assign an
 	 * erase hook that supports non-uniform erase.
 	 */
-	ret = spansion_read_any_reg(nor, SPINOR_REG_ADDR_CFR3V, 0, &cr);
+	ret = spansion_read_any_reg(nor, SPINOR_REG_CYPRESS_CFR3V, 0, &cr);
 	if (ret)
 		return ret;
-	if (!(cr & CFR3V_UNHYSA))
-		nor->erase = s25_erase_non_uniform;
+	if (!(cr & SPINOR_REG_CYPRESS_CFR3_UNISECT))
+		nor->erase = s25_s28_erase_non_uniform;
 
 	/*
 	 * For the multi-die package parts, the ready() hook is needed to check
 	 * all dies' status via read any register.
 	 */
 	if (nor->mtd.size > SZ_128M)
-		nor->ready = s25_mdp_ready;
+		nor->ready = s25_s28_mdp_ready;
 
 	return spi_nor_default_setup(nor, info, params);
 }
 
 static void s25_default_init(struct spi_nor *nor)
 {
-	nor->setup = s25_setup;
+	nor->setup = s25_s28_setup;
 }
 
-static int s25_post_bfpt_fixup(struct spi_nor *nor,
-			       const struct sfdp_parameter_header *header,
-			       const struct sfdp_bfpt *bfpt,
-			       struct spi_nor_flash_parameter *params)
+static int s25_s28_post_bfpt_fixup(struct spi_nor *nor,
+				   const struct sfdp_parameter_header *header,
+				   const struct sfdp_bfpt *bfpt,
+				   struct spi_nor_flash_parameter *params)
 {
 	int ret;
 	u32 addr;
@@ -3474,12 +3499,13 @@ static int s25_post_bfpt_fixup(struct spi_nor *nor,
 	 * dies are configured to 512B buffer.
 	 */
 	for (addr = 0; addr < params->size; addr += SZ_128M) {
-		ret = spansion_read_any_reg(nor, addr + SPINOR_REG_ADDR_CFR3V,
-					    0, &cfr3v);
+		ret = spansion_read_any_reg(nor,
+					    addr + SPINOR_REG_CYPRESS_CFR3V, 0,
+					    &cfr3v);
 		if (ret)
 			return ret;
 
-		if (!(cfr3v & CFR3V_PGMBUF)) {
+		if (!(cfr3v & SPINOR_REG_CYPRESS_CFR3_PGSZ)) {
 			params->page_size = 256;
 			return 0;
 		}
@@ -3507,7 +3533,7 @@ static void s25_post_sfdp_fixup(struct spi_nor *nor,
 
 static struct spi_nor_fixups s25_fixups = {
 	.default_init = s25_default_init,
-	.post_bfpt = s25_post_bfpt_fixup,
+	.post_bfpt = s25_s28_post_bfpt_fixup,
 	.post_sfdp = s25_post_sfdp_fixup,
 };
 
@@ -3539,97 +3565,57 @@ static struct spi_nor_fixups s25fl256l_fixups = {
  */
 static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor)
 {
-	struct spi_mem_op op;
+	u32 addr;
 	u8 buf;
-	u8 addr_width = 3;
 	int ret;
 
-	/* Use 24 dummy cycles for memory array reads. */
 	ret = write_enable(nor);
 	if (ret)
 		return ret;
 
-	buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
-	op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1),
-			SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR2V, 1),
-			SPI_MEM_OP_NO_DUMMY,
-			SPI_MEM_OP_DATA_OUT(1, &buf, 1));
-	ret = spi_mem_exec_op(nor->spi, &op);
-	if (ret) {
-		dev_warn(nor->dev,
-			 "failed to set default memory latency value: %d\n",
-			 ret);
-		return ret;
-	}
-	ret = spi_nor_wait_till_ready(nor);
-	if (ret)
-		return ret;
+	/* Use 24 dummy cycles for memory array reads. */
+	for (addr = 0; addr < nor->mtd.size; addr += SZ_128M) {
+		ret = spansion_read_any_reg(nor,
+					    addr + SPINOR_REG_CYPRESS_CFR2V, 0,
+					    &buf);
+		if (ret)
+			return ret;
 
+		buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK;
+		buf |= SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
+		ret = spansion_write_any_reg(nor,
+					     addr + SPINOR_REG_CYPRESS_CFR2V,
+					     buf);
+		if (ret) {
+			dev_warn(nor->dev, "failed to set default memory latency value: %d\n", ret);
+			return ret;
+		}
+	}
 	nor->read_dummy = 24;
 
-	/* Set the octal and DTR enable bits. */
 	ret = write_enable(nor);
 	if (ret)
 		return ret;
 
+	/* Set the octal and DTR enable bits. */
 	buf = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN;
-	op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1),
-			SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR5V, 1),
-			SPI_MEM_OP_NO_DUMMY,
-			SPI_MEM_OP_DATA_OUT(1, &buf, 1));
-	ret = spi_mem_exec_op(nor->spi, &op);
-	if (ret) {
-		dev_warn(nor->dev, "Failed to enable octal DTR mode\n");
-		return ret;
+	for (addr = 0; addr < nor->mtd.size; addr += SZ_128M) {
+		ret = spansion_write_any_reg(nor,
+					     addr + SPINOR_REG_CYPRESS_CFR5V,
+					     buf);
+		if (ret) {
+			dev_warn(nor->dev, "Failed to enable octal DTR mode\n");
+			return ret;
+		}
 	}
 
 	return 0;
 }
 
-static int s28hx_t_erase_non_uniform(struct spi_nor *nor, loff_t addr)
-{
-	/* Factory default configuration: 32 x 4 KiB sectors at bottom. */
-	return spansion_erase_non_uniform(nor, addr, SPINOR_OP_S28_SE_4K,
-					  0, SZ_128K);
-}
-
-static int s28hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
-			 const struct spi_nor_flash_parameter *params)
-{
-	struct spi_mem_op op;
-	u8 buf;
-	u8 addr_width = 3;
-	int ret;
-
-	ret = spi_nor_wait_till_ready(nor);
-	if (ret)
-		return ret;
-
-	/*
-	 * Check CFR3V to check if non-uniform sector mode is selected. If it
-	 * is, set the erase hook to the non-uniform erase procedure.
-	 */
-	op = (struct spi_mem_op)
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1),
-			   SPI_MEM_OP_ADDR(addr_width,
-					   SPINOR_REG_CYPRESS_CFR3V, 1),
-			   SPI_MEM_OP_NO_DUMMY,
-			   SPI_MEM_OP_DATA_IN(1, &buf, 1));
-
-	ret = spi_mem_exec_op(nor->spi, &op);
-	if (ret)
-		return ret;
-
-	if (!(buf & SPINOR_REG_CYPRESS_CFR3_UNISECT))
-		nor->erase = s28hx_t_erase_non_uniform;
-
-	return spi_nor_default_setup(nor, info, params);
-}
-
 static void s28hx_t_default_init(struct spi_nor *nor)
 {
 	nor->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable;
-	nor->setup = s28hx_t_setup;
+	nor->setup = s25_s28_setup;
 }
 
 static void s28hx_t_post_sfdp_fixup(struct spi_nor *nor,
@@ -3663,50 +3649,10 @@ static void s28hx_t_post_sfdp_fixup(struct spi_nor *nor,
 	params->rdsr_addr_nbytes = 4;
 }
 
-static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
-				   const struct sfdp_parameter_header *bfpt_header,
-				   const struct sfdp_bfpt *bfpt,
-				   struct spi_nor_flash_parameter *params)
-{
-	struct spi_mem_op op;
-	u8 buf;
-	u8 addr_width = 3;
-	int ret;
-
-	/*
-	 * The BFPT table advertises a 512B page size but the page size is
-	 * actually configurable (with the default being 256B). Read from
-	 * CFR3V[4] and set the correct size.
-	 */
-	op = (struct spi_mem_op)
-		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1),
-			   SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1),
-			   SPI_MEM_OP_NO_DUMMY,
-			   SPI_MEM_OP_DATA_IN(1, &buf, 1));
-	ret = spi_mem_exec_op(nor->spi, &op);
-	if (ret)
-		return ret;
-
-	if (buf & SPINOR_REG_CYPRESS_CFR3_PGSZ)
-		params->page_size = 512;
-	else
-		params->page_size = 256;
-
-	/*
-	 * The BFPT advertises that it supports 4k erases, and the datasheet
-	 * says the same. But 4k erases did not work when testing. So, use 256k
-	 * erases for now.
-	 */
-	nor->erase_opcode = SPINOR_OP_SE_4B;
-	nor->mtd.erasesize = 0x40000;
-
-	return 0;
-}
-
 static struct spi_nor_fixups s28hx_t_fixups = {
 	.default_init = s28hx_t_default_init,
 	.post_sfdp = s28hx_t_post_sfdp_fixup,
-	.post_bfpt = s28hx_t_post_bfpt_fixup,
+	.post_bfpt = s25_s28_post_bfpt_fixup,
 };
 #endif /* CONFIG_SPI_FLASH_S28HX_T */