serial: zynqmp: Fetch baudrate from dtb and update

The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot environment needs to be
updated.

To avoid this, support is added to fetch the baudrate directly from the
device tree file and update.
The serial, prints the log with the configured baudrate in the dtb.
The commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for
$fdtfile env variable") is taken as reference for changing the default
environment variable.

The default environment stores the default baudrate value, When default
baudrate and dtb baudrate are not same glitches are seen on the serial.
So, the environment also needs to be updated with the dtb baudrate to
avoid the glitches on the serial.

Also add test to cover this new function.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230921112043.3144726-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index df6a387284a..e4fa3933bc8 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -155,12 +155,61 @@ static void serial_find_console_or_panic(void)
 }
 #endif /* CONFIG_SERIAL_PRESENT */
 
+/**
+ * check_valid_baudrate() - Check whether baudrate is valid or not
+ *
+ * @baud: baud rate to check
+ * Return: 0 if OK, -ve on error
+ */
+static int check_valid_baudrate(int baud)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+		if (baud == baudrate_table[i])
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
+int fetch_baud_from_dtb(void)
+{
+	int baud_value, ret;
+
+	baud_value = ofnode_read_baud();
+	ret = check_valid_baudrate(baud_value);
+	if (ret)
+		return ret;
+
+	return baud_value;
+}
+
 /* Called prior to relocation */
 int serial_init(void)
 {
 #if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 	serial_find_console_or_panic();
 	gd->flags |= GD_FLG_SERIAL_READY;
+
+	if (IS_ENABLED(CONFIG_OF_SERIAL_BAUD)) {
+		int ret = 0;
+		char *ptr = (char*)&default_environment[0];
+
+		/*
+		 * Fetch the baudrate from the dtb and update the value in the
+		 * default environment.
+		 */
+		ret = fetch_baud_from_dtb();
+		if (ret != -EINVAL && ret != -EFAULT) {
+			gd->baudrate = ret;
+
+			while (*ptr != '\0' && *(ptr + 1) != '\0')
+				ptr++;
+			ptr += 2;
+			sprintf(ptr, "baudrate=%d", gd->baudrate);
+		}
+	}
 	serial_setbrg();
 #endif