diff options
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 13 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/spl.c | 6 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/tlb.c | 2 |
3 files changed, 20 insertions, 1 deletions
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index a71952dcf39..b7c39564325 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -97,6 +97,19 @@ void board_cpld_init(void) out_8(&cpld_data->status_led, CPLD_STATUS_LED); out_8(&cpld_data->fxo_led, CPLD_FXO_LED); out_8(&cpld_data->fxs_led, CPLD_FXS_LED); + + /* + * CPLD's system reset register on P1/P2 RDB boards is not autocleared + * after flipping it. If this register is set to one then CPLD triggers + * reset of CPU in few ms. + * + * CPLD does not trigger reset of CPU for 100ms after the last reset. + * + * This means that trying to reset board via CPLD system reset register + * cause reboot loop. To prevent this reboot loop, the only workaround + * is to try to clear CPLD's system reset register as early as possible + * and it has to be done in 100ms since the last start of reset. + */ out_8(&cpld_data->system_rst, CPLD_SYS_RST); } diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index b60027ebd9a..eda84bf2b1f 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -31,6 +31,12 @@ void board_init_f(ulong bootflag) u32 plat_ratio, bus_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + /* + * Call board_early_init_f() as early as possible as it workarounds + * reboot loop due to broken CPLD state machine for reset line. + */ + board_early_init_f(); + console_init_f(); /* Set pmuxcr to allow both i2c1 and i2c2 */ diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 105d9e38aac..65cedd42a0d 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -61,11 +61,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_1M, 1), #endif +#endif /* not SPL */ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#endif /* not SPL */ #ifdef CONFIG_SYS_NAND_BASE /* *I*G - NAND */ |