diff options
| -rw-r--r-- | arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 11 | ||||
| -rw-r--r-- | board/phytec/phycore_imx93/MAINTAINERS | 2 | ||||
| -rw-r--r-- | configs/imx93-phycore_defconfig (renamed from configs/imx93-phyboard-segin_defconfig) | 2 | ||||
| -rw-r--r-- | doc/board/phytec/imx93-phycore.rst (renamed from doc/board/phytec/imx93-phyboard-segin.rst) | 8 | ||||
| -rw-r--r-- | doc/board/phytec/index.rst | 2 |
5 files changed, 17 insertions, 8 deletions
diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi index 702d86f4e03..0c3ca2961c9 100644 --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi @@ -2,15 +2,22 @@ /* * Copyright (C) 2023 PHYTEC Messtechnik GmbH * Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH * * Product homepage: - * phyBOARD-Segin carrier board is reused for the i.MX93 design. - * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/ */ #include "imx93-u-boot.dtsi" / { + /* + * The phyCORE-i.MX93 u-boot uses the imx93-phyboard-segin.dts as + * reference, but does only make use of its SoM (phyCORE) contained + * periphery. + */ + model = "PHYTEC phyCORE-i.MX93"; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog3>; diff --git a/board/phytec/phycore_imx93/MAINTAINERS b/board/phytec/phycore_imx93/MAINTAINERS index cea817ffdc0..718f89a084a 100644 --- a/board/phytec/phycore_imx93/MAINTAINERS +++ b/board/phytec/phycore_imx93/MAINTAINERS @@ -9,5 +9,5 @@ F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi F: board/phytec/phycore_imx93/ F: board/phytec/common/imx93_som_detection.c F: board/phytec/common/imx93_som_detection.h -F: configs/imx93-phyboard-segin_defconfig +F: configs/imx93-phycore_defconfig F: include/configs/phycore_imx93.h diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phycore_defconfig index 309262c4303..cf9800118ac 100644 --- a/configs/imx93-phyboard-segin_defconfig +++ b/configs/imx93-phycore_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x20000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 +CONFIG_PHYTEC_SOM_DETECTION=y CONFIG_ENV_SOURCE_FILE="phycore_imx93" CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x700000 @@ -31,6 +32,7 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x90000000 CONFIG_REMAKE_ELF=y +# CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" diff --git a/doc/board/phytec/imx93-phyboard-segin.rst b/doc/board/phytec/imx93-phycore.rst index ce17fbec78d..bd110a3ebee 100644 --- a/doc/board/phytec/imx93-phyboard-segin.rst +++ b/doc/board/phytec/imx93-phycore.rst @@ -1,9 +1,9 @@ .. SPDX-License-Identifier: GPL-2.0+ -phyBOARD-Segin-i.MX93 -===================== +phyCORE-i.MX 93 +=============== -U-Boot for the phyBOARD-Segin-i.MX93. +U-Boot for the phyCORE-i.MX 93. Quick Start ----------- @@ -51,7 +51,7 @@ Build U-Boot .. code-block:: bash - $ make imx93-phyboard-segin_defconfig + $ make imx93-phycore_defconfig $ make Burn the flash.bin to MicroSD card offset 32KB: diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst index 99848a9e958..fa306974645 100644 --- a/doc/board/phytec/index.rst +++ b/doc/board/phytec/index.rst @@ -7,7 +7,7 @@ PHYTEC :maxdepth: 2 imx8mm-phygate-tauri-l - imx93-phyboard-segin + imx93-phycore phycore-am62x phycore-am64x phycore-imx8mm |