diff options
| -rw-r--r-- | Makefile | 65 | ||||
| -rw-r--r-- | scripts/Kbuild.include | 22 | ||||
| -rw-r--r-- | scripts/Makefile.build | 87 | ||||
| -rw-r--r-- | scripts/Makefile.host | 6 | ||||
| -rw-r--r-- | scripts/Makefile.lib | 55 |
5 files changed, 113 insertions, 122 deletions
@@ -12,10 +12,6 @@ NAME = # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour) -MAKEFLAGS += -rR - # Determine target architecture for the sandbox include include/host_arch.h ifeq ("", "$(CROSS_COMPILE)") @@ -39,15 +35,6 @@ else ifeq ("riscv64", $(MK_ARCH)) endif undefine MK_ARCH -# Avoid funny character set dependencies -unexport LC_ALL -LC_COLLATE=C -LC_NUMERIC=C -export LC_COLLATE LC_NUMERIC - -# Avoid interference with shell env settings -unexport GREP_OPTIONS - # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # @@ -64,6 +51,21 @@ unexport GREP_OPTIONS # descending is started. They are now explicitly listed as the # prepare rule. +ifneq ($(sub-make-done),1) + +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour) +MAKEFLAGS += -rR + +# Avoid funny character set dependencies +unexport LC_ALL +LC_COLLATE=C +LC_NUMERIC=C +export LC_COLLATE LC_NUMERIC + +# Avoid interference with shell env settings +unexport GREP_OPTIONS + # Beautify output # --------------------------------------------------------------------------- # @@ -137,7 +139,6 @@ export quiet Q KBUILD_VERBOSE # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) -ifeq ($(KBUILD_SRC),) # OK, Make called in directory where kernel src resides # Do we want to locate output files in a separate directory? @@ -168,22 +169,25 @@ $(if $(KBUILD_OUTPUT),, \ # 'sub-make' below. MAKEFLAGS += --include-dir=$(CURDIR) +else + +# Do not print "Entering directory ..." at all for in-tree build. +MAKEFLAGS += --no-print-directory + +endif # ifneq ($(KBUILD_OUTPUT),) + PHONY += $(MAKECMDGOALS) sub-make $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: sub-make: FORCE - $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + $(Q)$(MAKE) sub-make-done=1 \ + $(if $(KBUILD_OUTPUT),-C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR)) \ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) -# Leave processing to above invocation of make -skip-makefile := 1 -endif # ifneq ($(KBUILD_OUTPUT),) -endif # ifeq ($(KBUILD_SRC),) - +else # sub-make-done # We process the rest of the Makefile if this is the final invocation of make -ifeq ($(skip-makefile),) # Do not print "Entering directory ...", # but we want to display it when entering to the output directory @@ -429,7 +433,7 @@ CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ -KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ +KBUILD_CFLAGS := -Wall -Werror=strict-prototypes -Wno-trigraphs \ -Wno-format-security \ -fno-builtin -ffreestanding $(CSTD_FLAG) KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing @@ -2281,7 +2285,7 @@ mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) mrproper-dirs := $(addprefix _mrproper_,scripts) -PHONY += $(mrproper-dirs) mrproper archmrproper +PHONY += $(mrproper-dirs) mrproper $(mrproper-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) @@ -2539,18 +2543,15 @@ quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) cmd_rmfiles = rm -f $(rm-files) -# read all saved command lines - -cmd_files := $(wildcard .*.cmd) - -ifneq ($(cmd_files),) - $(cmd_files): ; # Do not try to update included dependency files - include $(cmd_files) -endif +# read saved command lines for existing targets +existing-targets := $(wildcard $(sort $(targets))) +cmd_files := $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) +$(cmd_files): ; # Do not try to update included dependency files +-include $(cmd_files) endif #ifeq ($(config-targets),1) endif #ifeq ($(mixed-targets),1) -endif # skip-makefile +endif # sub-make-done PHONY += FORCE FORCE: diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 054dd157485..c0d3440a4b3 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -28,6 +28,10 @@ basetarget = $(basename $(notdir $@)) baseprereq = $(basename $(notdir $<)) ### +# real prerequisites without phony targets +real-prereqs = $(filter-out $(PHONY), $^) + +### # Escape single quote for use in echo statements escsq = $(subst $(squote),'\$(squote)',$1) @@ -222,7 +226,7 @@ echo-cmd = $(if $($(quiet)cmd_$(1)),\ echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) # printing commands -cmd = @$(echo-cmd) $(cmd_$(1)) +cmd = @set -e; $(echo-cmd) $(cmd_$(1)) # Add $(obj)/ for paths that are not absolute objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o))) @@ -264,19 +268,17 @@ if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) # Execute the command and also postprocess generated .d dependencies file. -if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ - @set -e; \ - $(echo-cmd) $(cmd_$(1)); \ - scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\ - rm -f $(depfile); \ - mv -f $(dot-target).tmp $(dot-target).cmd, @:) +if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)),$(cmd_and_fixdep),@:) + +cmd_and_fixdep = \ + $(cmd); \ + scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\ + rm -f $(depfile) # Usage: $(call if_changed_rule,foo) # Will check if $(cmd_foo) or any of the prerequisites changed, # and if so will execute $(rule_foo). -if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ - @set -e; \ - $(rule_$(1)), @:) +if_changed_rule = $(if $(strip $(any-prereq) $(arg-check)),$(rule_$(1)),@:) ### # why - tell why a a target got build diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 90aed148c44..aa48d249433 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -82,7 +82,9 @@ ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) builtin-target := $(obj)/built-in.o endif +ifdef CONFIG_MODULES modorder-target := $(obj)/modules.order +endif # We keep a list of all modules in $(MODVERDIR) @@ -94,10 +96,10 @@ __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ # Linus' kernel sanity checking tool ifeq ($(KBUILD_CHECKSRC),1) quiet_cmd_checksrc = CHECK $< - cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< else ifeq ($(KBUILD_CHECKSRC),2) quiet_cmd_force_checksrc = CHECK $< - cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< endif # Do section mismatch analysis for each module/built-in.o @@ -113,20 +115,13 @@ modkern_cflags = \ $(if $(part-of-module), \ $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) -quiet_modtag := $(empty) $(empty) +quiet_modtag = $(if $(part-of-module),[M], ) $(real-objs-m) : part-of-module := y $(real-objs-m:.o=.i) : part-of-module := y $(real-objs-m:.o=.s) : part-of-module := y $(real-objs-m:.o=.lst): part-of-module := y -$(real-objs-m) : quiet_modtag := [M] -$(real-objs-m:.o=.i) : quiet_modtag := [M] -$(real-objs-m:.o=.s) : quiet_modtag := [M] -$(real-objs-m:.o=.lst): quiet_modtag := [M] - -$(obj-m) : quiet_modtag := [M] - # Default for not multi-part modules modname = $(basetarget) @@ -153,13 +148,12 @@ $(obj)/%.i: $(src)/%.c FORCE cmd_gensymtypes = \ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ - $(GENKSYMS) $(if $(1), -T $(2)) \ + scripts/genksyms/genksyms $(if $(1), -T $(2)) \ $(if $(KBUILD_PRESERVE),-p) \ -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = \ - set -e; \ $(call cmd_gensymtypes,true,$@) >/dev/null; \ test -s $@ || rm -f $@ @@ -171,34 +165,30 @@ $(obj)/%.symtypes : $(src)/%.c FORCE # (See cmd_cc_o_c + relevant part of rule_cc_o_c) quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ - -ifndef CONFIG_MODVERSIONS cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -else +ifdef CONFIG_MODVERSIONS # When module versioning is enabled the following steps are executed: -# o compile a .tmp_<file>.o from <file>.c -# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does -# not export symbols, we just rename .tmp_<file>.o to <file>.o and -# are done. +# o compile a <file>.o from <file>.c +# o if <file>.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, it's done # o otherwise, we calculate symbol versions using the good old # genksyms on the preprocessed source and postprocess them in a way # that they are usable as a linker script -# o generate <file>.o from .tmp_<file>.o using the linker to +# o generate .tmp_<file>.o from <file>.o using the linker to # replace the unresolved symbols __crc_exported_symbol with # the actual value of the checksum generated by genksyms -cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< +# o remove .tmp_<file>.o to <file>.o cmd_modversions = \ - if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + if $(OBJDUMP) -h $@ | grep -q __ksymtab; then \ $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ > $(@D)/.tmp_$(@F:.o=.ver); \ \ - $(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + $(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ \ -T $(@D)/.tmp_$(@F:.o=.ver); \ - rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ - else \ mv -f $(@D)/.tmp_$(@F) $@; \ + rm -f $(@D)/.tmp_$(@F:.o=.ver); \ fi; endif @@ -223,7 +213,7 @@ sub_cmd_record_mcount = \ recordmcount_source := $(srctree)/scripts/recordmcount.c \ $(srctree)/scripts/recordmcount.h else -sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ +sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_SYS_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \ @@ -231,24 +221,26 @@ sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH "$(if $(part-of-module),1,0)" "$(@)"; recordmcount_source := $(srctree)/scripts/recordmcount.pl endif -cmd_record_mcount = \ - if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ - "$(CC_FLAGS_FTRACE)" ]; then \ - $(sub_cmd_record_mcount) \ - fi; +cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), \ + $(sub_cmd_record_mcount)) endif # -record-mcount endif define rule_cc_o_c - $(call echo-cmd,checksrc) $(cmd_checksrc) \ - $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ - $(cmd_modversions) \ - $(call echo-cmd,record_mcount) \ - $(cmd_record_mcount) \ - scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ - $(dot-target).tmp; \ - rm -f $(depfile); \ - mv -f $(dot-target).tmp $(dot-target).cmd + $(call cmd,checksrc) + $(call cmd_and_fixdep,cc_o_c) + $(call cmd,gen_ksymdeps) + $(call cmd,checkdoc) + $(call cmd,objtool) + $(call cmd,modversions_c) + $(call cmd,record_mcount) +endef + +define rule_as_o_S + $(call cmd_and_fixdep,as_o_S) + $(call cmd,gen_ksymdeps) + $(call cmd,objtool) + $(call cmd,modversions_S) endef # Built-in and composite module parts @@ -352,11 +344,9 @@ $(modorder-target): $(subdir-ym) FORCE # Rule to compile a set of .o files into one .a file # ifdef lib-target -quiet_cmd_link_l_target = AR $@ -cmd_link_l_target = rm -f $@; $(AR) cDPrsT$(KBUILD_ARFLAGS) $@ $(lib-y) $(lib-target): $(lib-y) FORCE - $(call if_changed,link_l_target) + $(call if_changed,ar) targets += $(lib-target) endif @@ -409,14 +399,17 @@ FORCE: # optimization, we don't need to read them if the target does not # exist, we will rebuild anyway in that case. -cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd)) +existing-targets := $(wildcard $(sort $(targets))) -ifneq ($(cmd_files),) - include $(cmd_files) -endif +-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) # Create directories for object files if they do not exist obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets)))) +# If targets exist, their directories apparently exist. Skip mkdir. +existing-dirs := $(sort $(patsubst %/,%, $(dir $(existing-targets)))) +obj-dirs := $(strip $(filter-out $(existing-dirs), $(obj-dirs))) +ifneq ($(obj-dirs),) $(shell mkdir -p $(obj-dirs)) +endif .PHONY: $(PHONY) diff --git a/scripts/Makefile.host b/scripts/Makefile.host index 7624304e3e9..bd5ed4c63b7 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -72,13 +72,15 @@ _hostc_flags = $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) \ _hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \ $(HOSTCXXFLAGS_$(basetarget).o) -ifeq ($(KBUILD_SRC),) __hostc_flags = $(_hostc_flags) __hostcxx_flags = $(_hostcxx_flags) -else + +ifeq ($(KBUILD_EXTMOD),) +ifneq ($(KBUILD_SRC),) __hostc_flags = -I$(obj) $(call flags,_hostc_flags) __hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags) endif +endif hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags) hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index e89a4a51b74..acf780fdd45 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -143,15 +143,14 @@ _c_flags += $(if $(patsubst n%,, \ $(CFLAGS_KASAN)) endif -# If building the kernel in a separate objtree expand all occurrences -# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). - -ifeq ($(KBUILD_SRC),) __c_flags = $(_c_flags) __a_flags = $(_a_flags) __cpp_flags = $(_cpp_flags) -else +# If building the kernel in a separate objtree expand all occurrences +# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). +ifeq ($(KBUILD_EXTMOD),) +ifneq ($(KBUILD_SRC),) # -I$(obj) locates generated .h files # $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files # and locates generated .h files @@ -161,6 +160,7 @@ __c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \ __a_flags = $(call flags,_a_flags) __cpp_flags = $(call flags,_cpp_flags) endif +endif # Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \ @@ -278,6 +278,11 @@ $(obj)/%: $(src)/%_shipped quiet_cmd_ld = LD $@ cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@ +# Archive +# --------------------------------------------------------------------------- +quiet_cmd_ar = AR $@ +cmd_ar = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(real-prereqs) + # Objcopy # --------------------------------------------------------------------------- @@ -288,8 +293,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ # --------------------------------------------------------------------------- quiet_cmd_gzip = GZIP $@ -cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \ - (rm -f $@ ; false) +cmd_gzip = cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@ # DTC # --------------------------------------------------------------------------- @@ -301,7 +305,7 @@ DTC_FLAGS += -Wno-unit_address_vs_reg \ -Wno-avoid_unnecessary_addr_size \ -Wno-alias_paths \ -Wno-graph_child_address \ - -Wno-graph_port \ + -Wno-simple_bus_reg \ -Wno-unique_unit_address \ -Wno-simple_bus_reg \ -Wno-pci_device_reg @@ -325,7 +329,7 @@ DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@) quiet_cmd_dt_S_dtb= DTBS $@ # Modified for U-Boot cmd_dt_S_dtb= \ -( \ +{ \ echo '.section .dtb.init.rodata,"a"'; \ echo '.balign 16'; \ echo '.global __dtb_$(subst -,_,$(*F))_begin'; \ @@ -334,7 +338,7 @@ cmd_dt_S_dtb= \ echo '__dtb_$(subst -,_,$(*F))_end:'; \ echo '.global __dtb_$(subst -,_,$(*F))_end'; \ echo '.balign 16'; \ -) > $@ +} > $@ $(obj)/%.dtb.S: $(obj)/%.dtb $(call cmd,dt_S_dtb) @@ -547,7 +551,7 @@ $(obj)/dsdt_generated.c: $(src)/dsdt.asl # append the size as a 32-bit littleendian number as gzip does. size_append = printf $(shell \ dec_size=0; \ -for F in $1; do \ +for F in $(real-prereqs); do fsize=$$(stat -c "%s" $$F); \ dec_size=$$(expr $$dec_size + $$fsize); \ done; \ @@ -561,27 +565,20 @@ printf "%08x\n" $$dec_size | \ ) quiet_cmd_bzip2 = BZIP2 $@ -cmd_bzip2 = (cat $(filter-out FORCE,$^) | \ - bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) +cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9 && $(size_append); } > $@ # Lzma # --------------------------------------------------------------------------- quiet_cmd_lzma = LZMA $@ -cmd_lzma = (cat $(filter-out FORCE,$^) | \ - lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) +cmd_lzma = { cat $(real-prereqs) | lzma -9 && $(size_append); } > $@ quiet_cmd_lzo = LZO $@ -cmd_lzo = (cat $(filter-out FORCE,$^) | \ - lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) +cmd_lzo = { cat $(real-prereqs) | lzop -9 && $(size_append); } > $@ quiet_cmd_lz4 = LZ4 $@ -cmd_lz4 = (cat $(filter-out FORCE,$^) | \ - lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) +cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \ + $(size_append); } > $@ # U-Boot mkimage # --------------------------------------------------------------------------- @@ -625,15 +622,11 @@ quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT) # big dictionary would increase the memory usage too much in the multi-call # decompression mode. A BCJ filter isn't used either. quiet_cmd_xzkern = XZKERN $@ -cmd_xzkern = (cat $(filter-out FORCE,$^) | \ - sh $(srctree)/scripts/xz_wrap.sh && \ - $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) +cmd_xzkern = { cat $(filter-out FORCE,$^) | \ + sh $(srctree)/scripts/xz_wrap.sh && $(size_append); } > $@ quiet_cmd_xzmisc = XZMISC $@ -cmd_xzmisc = (cat $(filter-out FORCE,$^) | \ - xz --check=crc32 --lzma2=dict=1MiB) > $@ || \ - (rm -f $@ ; false) +cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@ # Additional commands for U-Boot # @@ -718,7 +711,7 @@ endef # Use filechk to avoid rebuilds when a header changes, but the resulting file # does not define filechk_offsets - (set -e; \ + ( \ echo "#ifndef $2"; \ echo "#define $2"; \ echo "/*"; \ |