diff options
26 files changed, 478 insertions, 73 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 042282f3723..6ad59aeed5f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -190,7 +190,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ cn9130-crb-A.dtb \ cn9130-crb-B.dtb \ ac5-98dx35xx-rd.dtb \ - ac5-98dx35xx-atl-x240.dtb + ac5-98dx35xx-atl-x240.dtb \ + cn9130-atl-x250.dtb endif dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb diff --git a/arch/arm/dts/cn9130-atl-x250.dts b/arch/arm/dts/cn9130-atl-x250.dts new file mode 100644 index 00000000000..f2c82da9d14 --- /dev/null +++ b/arch/arm/dts/cn9130-atl-x250.dts @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Allied Telesis Labs + */ + +#include "cn9130.dtsi" + +/ { + model = "Allied Telesis x250"; + compatible = "alliedtelesis,x250", + "marvell,cn9130", + "marvell,armada-ap806-quad", + "marvell,armada-ap806"; + + aliases { + serial0 = &uart0; + i2c0 = &cp0_i2c0; + i2c1 = &cp0_i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + fault { + label = "fault:red"; + gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +/* + * AP related configuration + */ +&ap_pinctl { + /* AP_MPP Pins: + * GPIO & NC [0-6,9-10,12] + * UART0 [11,19] + * UART1 [7,8] + * Note: The x250-28XTm PT1 units has the console port wired + * to the second uart pins (UART1). This was fixed in all + * subsequent models. + * Here we choose to configure the pin control for both + * uarts to cater for either unit. + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0 0 0 0 0 0 0 3 3 0 + 0 3 0 0 0 0 0 0 0 3 >; +}; + +&ap_gpio0 { + pp-reset { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + output-high; + line-name = "pp-reset"; + }; +}; + +/* + * CP related configuration + */ +&cp0_pinctl { + /* MPP Bus: + * [0-1] DEV + * [2-8] GPIO + * [9] DEV + * [10-12] GPIO + * [13] ND_RB + * [14] GPIO + * [15-28] DEV + * [29-30] GPIO + * [31] DEV + * [32-34] GPIO + * [35-36] I2C1 + * [37-38] I2C0 + * [39-55] GPIO + * [56-60] SPI + * [61-62] GPIO + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 1 1 0 0 0 0 0 0 0 1 + 0 0 0 2 0 1 1 1 1 1 + 1 1 1 1 1 1 1 1 1 0 + 0 1 0 0 0 2 2 2 2 0 + 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 6 + 6 0 0>; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = <37 38>; + marvell,function = <2>; + }; + + cp0_i2c0_gpio_pins: cp0-i2c-gpio-pins-0 { + marvell,pins = <37 38>; + marvell,function = <0>; + }; + + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = <35 36>; + marvell,function = <2>; + }; + + cp0_nand_pins: cp0-nand-pins { + marvell,pins = <0 1 9 15 16 17 18 19 20 21 22 23 24 25 26 27 28 31>; + marvell,function = <1>; + }; + + cp0_nand_rb: cp0-nand-rb { + marvell,pins = <13>; + marvell,function = <2>; + }; + + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = <56 57 58 59 60>; + marvell,function = <6>; + }; +}; + +&cp0_comphy { + phy0 { + phy-type = <COMPHY_TYPE_PEX0>; + }; + + phy1 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy2 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy3 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy4 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy5 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; +}; + +&cp0_pcie0 { + num-lanes = <1>; + /* non-prefetchable memory */ + ranges =<0x82000000 0 0xc0000000 0 0xc0000000 0 0x2000000>; + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + clock-frequency = <200000000>; +}; + +&cp0_utmi0 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +&cp0_nand { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_nand_pins &cp0_nand_rb>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-timing-mode = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@user { + reg = <0x00000000 0x10000000>; + label = "user"; + }; + }; +}; + +&cp0_gpio0 +{ + nand-protect { + gpio-hog; + gpios = <29 GPIO_ACTIVE_LOW>; + output-low; + line-name = "nand-protect"; + }; +}; + +&cp0_gpio1 +{ + usb-en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-en"; + }; + + phy-reset { + gpio-hog; + gpios = <21 GPIO_ACTIVE_LOW>; + output-high; + line-name = "phy-reset"; + }; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&cp0_i2c0_pins>; + pinctrl-1 = <&cp0_i2c0_gpio_pins>; + scl-gpios = <&cp0_gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&cp0_gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9546"; + reg = <0x71>; + i2c-mux-idle-disconnect; + reset-gpios = <&cp0_gpio1 19 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + rtc@68 { + compatible = "adi,max31331"; + reg = <0x68>; + }; + }; + }; +}; + +&cp0_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c1a1a333e6c..adb816982f8 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -215,9 +215,16 @@ config TARGET_X530 bool "Support Allied Telesis x530" select 88F6820 +config TARGET_X250 + bool "Support Allied Telesis x250" + select ARMADA_8K + imply SCSI + imply BOOTSTD_DEFAULTS + config TARGET_X240 bool "Support Allied Telesis x240" select ALLEYCAT_5 + imply BOOTSTD_DEFAULTS config TARGET_DB_XC3_24G4XG bool "Support DB-XC3-24G4XG" @@ -301,6 +308,7 @@ config SYS_BOARD default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "x250" if TARGET_X250 default "x240" if TARGET_X240 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 @@ -325,6 +333,7 @@ config SYS_CONFIG_NAME default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "x250" if TARGET_X250 default "x240" if TARGET_X240 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 @@ -349,6 +358,7 @@ config SYS_VENDOR default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC default "alliedtelesis" if TARGET_X530 + default "alliedtelesis" if TARGET_X250 default "alliedtelesis" if TARGET_X240 default "mikrotik" if TARGET_CRS3XX_98DX3236 default "Marvell" if TARGET_MVEBU_ALLEYCAT5 diff --git a/board/Marvell/sheevaplug/sheevaplug.env b/board/Marvell/sheevaplug/sheevaplug.env new file mode 100644 index 00000000000..bcd62dbeb73 --- /dev/null +++ b/board/Marvell/sheevaplug/sheevaplug.env @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2024 Tony Dinh <mibodhi@gmail.com> + * + * Environment variables configurations + */ + +kernel_addr_r=0x800000 +fdt_addr_r=0x2c00000 +ramdisk_addr_r=0x01100000 +scriptaddr=0x200000 +fdtfile=CONFIG_DEFAULT_DEVICE_TREE.dtb +mtdparts=CONFIG_MTDPARTS_DEFAULT +console=ttyS0,115200 + +/* Standard Boot */ +bootcmd= + bootflow scan -lb +failed= + echo CONFIG_SYS_BOARD boot failed - please check your image diff --git a/board/alliedtelesis/x250/MAINTAINERS b/board/alliedtelesis/x250/MAINTAINERS new file mode 100644 index 00000000000..8a74dbc68b6 --- /dev/null +++ b/board/alliedtelesis/x250/MAINTAINERS @@ -0,0 +1,7 @@ +X250 BOARD +M: Chris Packham <chris.packham@alliedtelesis.co.nz> +S: Maintained +F: board/alliedtelesis/x250/ +F: arch/arm/dts/cn9130-atl-x250.dts +F: include/configs/x250.h +F: configs/x250_defconfig diff --git a/board/alliedtelesis/x250/Makefile b/board/alliedtelesis/x250/Makefile new file mode 100644 index 00000000000..98e0ccedde4 --- /dev/null +++ b/board/alliedtelesis/x250/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2024 Allied Telesis +# + +obj-y += x250.o diff --git a/board/alliedtelesis/x250/x250.c b/board/alliedtelesis/x250/x250.c new file mode 100644 index 00000000000..66c782698ff --- /dev/null +++ b/board/alliedtelesis/x250/x250.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <config.h> +#include <asm/global_data.h> +#include <linux/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DEVICE_BUS_SYNC_CTRL 0xF27004C8 + +int board_init(void) +{ + gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; + + /* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */ + writel(0x00004001, DEVICE_BUS_SYNC_CTRL); + + return 0; +} diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 323e2f5d4c8..1ba02e0595f 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -33,7 +33,6 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)" diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index e35ca165d0f..941156750ac 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -33,7 +33,6 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),-(root)" diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index 25e5be3ba7d..44e9b176827 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -49,7 +49,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y CONFIG_ENV_OVERWRITE=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index af758fcc431..add4a24a31d 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)" diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 0fab4c38e0e..540b9184b38 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)" diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 9d195e1cf2d..6ee40e380b2 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -35,7 +35,6 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x80000@0x0(uboot),0x20000@0x80000(uboot_env),-@0xa0000(rootfs)" diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 783879d4eec..ca70ee96379 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)" @@ -66,5 +65,3 @@ CONFIG_SYS_NS16550_REG_SIZE=-4 CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_NAND=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index f6718350d58..9a42c391556 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -30,7 +30,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_SATA=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)" diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig index c4235eecfb5..ab9316340d8 100644 --- a/configs/nsa325_defconfig +++ b/configs/nsa325_defconfig @@ -42,7 +42,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y # CONFIG_CMD_BLOCK_CACHE is not set -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)" @@ -73,6 +72,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_EHCI_HCD=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_NAND=y CONFIG_UBIFS_SILENCE_MSG=y diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 50103f375a1..50c92925506 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -32,7 +32,6 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)" diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig index fb8036a75e1..03b4fd9b2fc 100644 --- a/configs/pogo_v4_defconfig +++ b/configs/pogo_v4_defconfig @@ -41,7 +41,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y # CONFIG_CMD_BLOCK_CACHE is not set -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)" @@ -73,6 +72,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_EHCI_HCD=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_NAND=y CONFIG_UBIFS_SILENCE_MSG=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 9ac40b9e571..a7f6c73ecba 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -16,16 +16,14 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-sheevaplug" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" +CONFIG_LTO=y CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 +CONFIG_BOOTSTD_FULL=y CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 -CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set @@ -35,19 +33,10 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SATA=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y @@ -68,6 +57,5 @@ CONFIG_DM_RTC=y CONFIG_RTC_MV=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y CONFIG_LZMA=y CONFIG_BZIP2=y diff --git a/configs/x240_defconfig b/configs/x240_defconfig index f930d28de2d..ff64916204c 100644 --- a/configs/x240_defconfig +++ b/configs/x240_defconfig @@ -27,16 +27,12 @@ CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_REGULATOR=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_IPV6=y CONFIG_CLK=y CONFIG_CLK_MVEBU=y CONFIG_GPIO_HOG=y @@ -74,7 +70,6 @@ CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y @@ -83,3 +78,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y # CONFIG_FAT_WRITE is not set # CONFIG_SMBIOS is not set +# CONFIG_TOOLS_MKEFICAPSULE is not set diff --git a/configs/x250_defconfig b/configs/x250_defconfig new file mode 100644 index 00000000000..dffe85bd6eb --- /dev/null +++ b/configs/x250_defconfig @@ -0,0 +1,104 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MVEBU=y +CONFIG_TEXT_BASE=0x00000000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 +CONFIG_TARGET_X250=y +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0xf80000 +CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="cn9130-atl-x250" +CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_DEBUG_UART_BASE=0xf0512000 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" +CONFIG_USE_PREBOOT=y +CONFIG_SPL_SILENT_CONSOLE=y +CONFIG_TPL_SILENT_CONSOLE=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_UBI=y +CONFIG_MAC_PARTITION=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_ARP_TIMEOUT=200 +CONFIG_NET_RETRY_COUNT=50 +CONFIG_IPV6=y +CONFIG_SYS_64BIT_LBA=y +CONFIG_GPIO_HOG=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_GPIO=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_INPUT is not set +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +# CONFIG_MMC is not set +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_PXA3XX=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_MVPP2=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_MVEBU=y +CONFIG_PHY=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_8K=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_RTC_MAX313XX=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +# CONFIG_TOOLS_MKEFICAPSULE is not set diff --git a/configs/x530_defconfig b/configs/x530_defconfig index 89612be631e..815370c90ec 100644 --- a/configs/x530_defconfig +++ b/configs/x530_defconfig @@ -65,6 +65,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_OVERWRITE=y CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 +CONFIG_IPV6=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y @@ -95,3 +96,4 @@ CONFIG_USB_ETHER_ASIX88179=y CONFIG_WDT=y CONFIG_WDT_ORION=y CONFIG_SPL_TINY_MEMSET=y +# CONFIG_TOOLS_MKEFICAPSULE is not set diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 4e0b3c663c7..0a5f23e4c88 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -12,13 +12,4 @@ #include "mv-common.h" -/* - * Environment variables configurations - */ -#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/x240.h b/include/configs/x240.h index 3601df588d5..05241f33d74 100644 --- a/include/configs/x240.h +++ b/include/configs/x240.h @@ -11,22 +11,14 @@ /* additions for new ARM relocation support */ #define CFG_SYS_SDRAM_BASE 0x200000000 -#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400, 460800, 921600 } - /* Default Env vars */ - -#define BOOT_TARGET_DEVICES(func) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> +#define BOOT_TARGETS "usb dhcp" #define CFG_EXTRA_ENV_SETTINGS \ - BOOTENV \ "kernel_addr_r=0x202000000\0" \ "fdt_addr_r=0x201000000\0" \ "ramdisk_addr_r=0x206000000\0" \ + "boot_targets=" BOOT_TARGETS "\0" \ "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" /* diff --git a/include/configs/x250.h b/include/configs/x250.h new file mode 100644 index 00000000000..39f523fa6c4 --- /dev/null +++ b/include/configs/x250.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2024 Allied Telesis + */ + +#ifndef __X250_H_ +#define __X250_H_ + +/* + * High Level Configuration Options (easy to change) + */ +#define CFG_SYS_TCLK 250000000 /* 250MHz */ + +/* additions for new ARM relocation support */ +#define CFG_SYS_SDRAM_BASE 0x00000000 + +#define BOOT_TARGETS "usb scsi pxe dhcp" + +#define CFG_EXTRA_ENV_SETTINGS \ + "scriptaddr=0x6d00000\0" \ + "pxefile_addr_r=0x6e00000\0" \ + "fdt_addr_r=0x6f00000\0" \ + "kernel_addr_r=0x7000000\0" \ + "ramdisk_addr_r=0xa000000\0" \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "boot_targets=" BOOT_TARGETS "\0" + +#endif /* __X250_H_ */ diff --git a/include/configs/x530.h b/include/configs/x530.h index 982b1292873..c7bfd1de17c 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -18,30 +18,14 @@ #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - /* NAND */ #define BBT_CUSTOM_SCAN #define BBT_CUSTOM_SCAN_PAGE 0 #define BBT_CUSTOM_SCAN_POSITION 2048 -/* SPI NOR flash default params, used by sf commands */ - #define MTDPARTS_MTDOOPS "errlog" -/* Partition support */ - -/* Additional FS support/configuration */ - -/* Environment in SPI NOR flash */ - -/* NAND */ - #include <asm/arch/config.h> /* Keep device tree and initrd in low memory so the kernel can access them */ |