diff options
| -rw-r--r-- | board/sunxi/board.c | 5 | ||||
| -rw-r--r-- | drivers/power/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/axp_spl.c | 17 |
4 files changed, 33 insertions, 5 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index c7a2205ed61..ac9cefc6eac 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -563,7 +563,8 @@ void sunxi_board_init(void) #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ defined CONFIG_AXP221_POWER || defined CONFIG_AXP305_POWER || \ defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER || \ - defined CONFIG_AXP313_POWER || defined CONFIG_AXP717_POWER + defined CONFIG_AXP313_POWER || defined CONFIG_AXP717_POWER || \ + defined CONFIG_AXP803_POWER power_failed = axp_init(); if (IS_ENABLED(CONFIG_AXP_DISABLE_BOOT_ON_POWERON) && !power_failed) { @@ -581,6 +582,8 @@ void sunxi_board_init(void) #endif #ifdef CONFIG_AXP_DCDC2_VOLT power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); +#endif +#ifdef CONFIG_AXP_DCDC3_VOLT power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); #endif #ifdef CONFIG_AXP_DCDC4_VOLT diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 4b81aeb7497..5c73bc75a15 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -116,6 +116,12 @@ config AXP717_POWER ---help--- Select this to enable support for the AXP717 PMIC found on some boards. +config AXP803_POWER + bool "AXP803 PMIC support" + select AXP_PMIC_BUS + ---help--- + Select this to enable support for the AXP803 PMIC found on some boards. + config AXP809_POWER bool "axp809 pmic support" depends on MACH_SUN9I @@ -144,8 +150,8 @@ endchoice config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" - depends on AXP221_POWER || AXP809_POWER || AXP818_POWER - default 3300 if AXP818_POWER || MACH_SUN8I_R40 + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP803_POWER + default 3300 if AXP818_POWER || MACH_SUN8I_R40 || AXP803_POWER default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to @@ -158,11 +164,12 @@ config AXP_DCDC1_VOLT config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER || AXP717_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER || AXP717_POWER || AXP803_POWER default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER default 1000 if AXP313_POWER default 1000 if AXP717_POWER + default 1000 if AXP803_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I default 0 if MACH_SUN9I @@ -219,7 +226,7 @@ config AXP_DCDC4_VOLT config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" - depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP803_POWER default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 3f4d56f5139..3363191fdc8 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_AXP313_POWER) += axp_spl.o obj-$(CONFIG_AXP717_POWER) += axp_spl.o obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o +obj-$(CONFIG_AXP803_POWER) += axp_spl.o endif obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_SY8106A_POWER) += sy8106a.o diff --git a/drivers/power/axp_spl.c b/drivers/power/axp_spl.c index 3c86eb20ab4..7c51a9b3dfb 100644 --- a/drivers/power/axp_spl.c +++ b/drivers/power/axp_spl.c @@ -36,6 +36,23 @@ static const struct axp_reg_desc_spl axp_spl_dcdc_regulators[] = { #define AXP_SHUTDOWN_REG 0x27 #define AXP_SHUTDOWN_MASK BIT(0) +#elif defined(CONFIG_AXP803_POWER) /* AXP803 */ + +static const struct axp_reg_desc_spl axp_spl_dcdc_regulators[] = { + { 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA }, + { 0x10, BIT(1), 0x21, 0x7f, 500, 1300, 10, 70 }, + { 0x10, BIT(2), 0x22, 0x7f, 500, 1300, 10, 70 }, + { 0x10, BIT(3), 0x23, 0x7f, 500, 1300, 10, 70 }, + { 0x10, BIT(4), 0x24, 0x7f, 800, 1840, 10, 32 }, + { 0x10, BIT(5), 0x25, 0x7f, 600, 1520, 10, 50 }, +}; + +#define AXP_CHIP_VERSION 0x3 +#define AXP_CHIP_VERSION_MASK 0xcf +#define AXP_CHIP_ID 0x41 +#define AXP_SHUTDOWN_REG 0x32 +#define AXP_SHUTDOWN_MASK BIT(7) + #elif defined(CONFIG_AXP313_POWER) /* AXP313 */ static const struct axp_reg_desc_spl axp_spl_dcdc_regulators[] = { |