diff options
| -rw-r--r-- | board/freescale/imxrt1050-evk/README | 31 | ||||
| -rw-r--r-- | doc/board/freescale/imxrt1050-evk.rst | 41 | ||||
| -rw-r--r-- | doc/board/freescale/index.rst | 1 |
3 files changed, 42 insertions, 31 deletions
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README deleted file mode 100644 index f3213002461..00000000000 --- a/board/freescale/imxrt1050-evk/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on NXP i.MXRT1050 EVK ------------------------------------------------ - -- Build U-Boot for i.MXRT1050 EVK: - -$ make mrproper -$ make imxrt1050-evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync - -- Jumper settings: - -SW7: 1 0 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the ethernet connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. diff --git a/doc/board/freescale/imxrt1050-evk.rst b/doc/board/freescale/imxrt1050-evk.rst new file mode 100644 index 00000000000..c1fb48f0cdd --- /dev/null +++ b/doc/board/freescale/imxrt1050-evk.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +imxrt1050-evk +============= + +How to use U-Boot on NXP i.MXRT1050 EVK +--------------------------------------- + +- Build U-Boot for i.MXRT1050 EVK: + +.. code-block:: bash + + $ make mrproper + $ make imxrt1050-evk_defconfig + $ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + +.. code-block:: bash + + $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync + +- Flash the u-boot.img image into the micro SD card: + +.. code-block:: bash + + $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync + +- Jumper settings:: + + SW7: 1 0 1 0 + +where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. + The USB console connector is the one close the ethernet connector + +- Insert the micro SD card in the board, power it up and U-Boot messages should come up. diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst index 81c4826bebe..c9d7411875a 100644 --- a/doc/board/freescale/index.rst +++ b/doc/board/freescale/index.rst @@ -13,3 +13,4 @@ Freescale imx8mq_evk imx8qxp_mek imxrt1020-evk + imxrt1050-evk |