diff options
| -rw-r--r-- | board/ti/common/board_detect.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index 0806dea11ed..ed34991377e 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -103,14 +103,14 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, /* * Read the header first then only read the other contents. */ - rc = i2c_set_chip_offset_len(dev, 2); + rc = i2c_set_chip_offset_len(dev, 1); if (rc) return rc; /* * Skip checking result here since this could be a valid i2c read fail - * on some boards that use 1 byte addressing. - * We must allow for fall through to check the data if 1 byte + * on some boards that use 2 byte addressing. + * We must allow for fall through to check the data if 2 byte * addressing works */ (void)dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4); @@ -119,9 +119,9 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, if (hdr_read != header) { /* * read the eeprom header using i2c again, but use only a - * 1 byte address (some legacy boards need this..) + * 2 byte address (some newer boards need this..) */ - rc = i2c_set_chip_offset_len(dev, 1); + rc = i2c_set_chip_offset_len(dev, 2); if (rc) return rc; @@ -146,12 +146,12 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, /* * Read the header first then only read the other contents. */ - byte = 2; + byte = 1; /* * Skip checking result here since this could be a valid i2c read fail - * on some boards that use 1 byte addressing. - * We must allow for fall through to check the data if 1 byte + * on some boards that use 2 byte addressing. + * We must allow for fall through to check the data if 2 byte * addressing works */ (void)i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); @@ -160,9 +160,9 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, if (hdr_read != header) { /* * read the eeprom header using i2c again, but use only a - * 1 byte address (some legacy boards need this..) + * 2 byte address (some newer boards need this..) */ - byte = 1; + byte = 2; rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); if (rc) |