diff options
| -rw-r--r-- | arch/arm/mach-imx/imx9/scmi/soc.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-imx/imx9/soc.c | 8 | ||||
| -rw-r--r-- | board/phytec/phycore_imx93/spl.c | 3 | ||||
| -rw-r--r-- | configs/imx93-phycore_defconfig | 1 | ||||
| -rw-r--r-- | include/configs/imx93_evk.h | 4 | ||||
| -rw-r--r-- | include/configs/imx93_frdm.h | 4 | ||||
| -rw-r--r-- | include/configs/imx93_qsb.h | 4 |
7 files changed, 19 insertions, 18 deletions
diff --git a/arch/arm/mach-imx/imx9/scmi/soc.c b/arch/arm/mach-imx/imx9/scmi/soc.c index 13f13ca7d10..f973652d0cb 100644 --- a/arch/arm/mach-imx/imx9/scmi/soc.c +++ b/arch/arm/mach-imx/imx9/scmi/soc.c @@ -635,7 +635,8 @@ enum env_location env_get_location(enum env_operation op, int prio) switch (dev) { case QSPI_BOOT: - env_loc = ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) + env_loc = ENVL_SPI_FLASH; break; case SD1_BOOT: case SD2_BOOT: @@ -643,10 +644,16 @@ enum env_location env_get_location(enum env_operation op, int prio) case MMC1_BOOT: case MMC2_BOOT: case MMC3_BOOT: - env_loc = ENVL_MMC; + if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC)) + env_loc = ENVL_MMC; break; default: - env_loc = ENVL_NOWHERE; + if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE)) + env_loc = ENVL_NOWHERE; + else if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) + env_loc = ENVL_SPI_FLASH; + else if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC)) + env_loc = ENVL_MMC; break; } diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 9fb82644f12..3f7dafdcce5 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -809,7 +809,13 @@ enum env_location env_get_location(enum env_operation op, int prio) return ENVL_FAT; return ENVL_NOWHERE; default: - return ENVL_NOWHERE; + if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE)) + return ENVL_NOWHERE; + else if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) + return ENVL_SPI_FLASH; + else if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC)) + return ENVL_MMC; + return ENVL_UNKNOWN; } } diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c index 7b5d38d438f..beaa536c600 100644 --- a/board/phytec/phycore_imx93/spl.c +++ b/board/phytec/phycore_imx93/spl.c @@ -52,8 +52,7 @@ void spl_dram_init(void) int ret; enum phytec_imx93_ddr_eeprom_code ddr_opt = PHYTEC_IMX93_DDR_INVALID; - /* NOTE: In SPL lpi2c3 is mapped to bus 0 */ - ret = phytec_eeprom_data_setup(NULL, 0, EEPROM_ADDR); + ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR); if (ret && !IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX)) goto out; diff --git a/configs/imx93-phycore_defconfig b/configs/imx93-phycore_defconfig index 6210be64672..af149128ed4 100644 --- a/configs/imx93-phycore_defconfig +++ b/configs/imx93-phycore_defconfig @@ -92,6 +92,7 @@ CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth1" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_CLK_IMX93=y CONFIG_CLK_IMX93=y CONFIG_DFU_MMC=y diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index e7db0161126..ffd72a38bcb 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -11,10 +11,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_XPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - #ifdef CONFIG_ENV_MMC_DEVICE_INDEX #define IMX93_EVK_MMC_ENV_DEV CONFIG_ENV_MMC_DEVICE_INDEX #else diff --git a/include/configs/imx93_frdm.h b/include/configs/imx93_frdm.h index 987fcacb999..c98c10774cb 100644 --- a/include/configs/imx93_frdm.h +++ b/include/configs/imx93_frdm.h @@ -11,10 +11,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_XPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - /* Link Definitions */ #define CFG_SYS_INIT_RAM_ADDR 0x80000000 diff --git a/include/configs/imx93_qsb.h b/include/configs/imx93_qsb.h index 5ddc191d17c..a7b94f7ab57 100644 --- a/include/configs/imx93_qsb.h +++ b/include/configs/imx93_qsb.h @@ -9,10 +9,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - #define CFG_SYS_INIT_RAM_ADDR 0x80000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 |