diff options
59 files changed, 1795 insertions, 2910 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 66783d636e3..6b32a6d9464 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -534,6 +534,7 @@ F: arch/arm/include/asm/arch-rockchip/ F: arch/arm/mach-rockchip/ F: board/amarula/vyasa-rk3288/ F: board/anbernic/rgxx3_rk3566/ +F: board/armsom/sige7-rk3588/ F: board/chipspark/popmetal_rk3288 F: board/engicam/px30_core/ F: board/firefly/ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b524c885f21..93893989f51 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -52,14 +52,6 @@ dtb-$(CONFIG_MACH_S900) += \ dtb-$(CONFIG_MACH_S700) += \ s700-cubieboard7.dtb -dtb-$(CONFIG_ROCKCHIP_PX30) += \ - px30-evb.dtb \ - px30-firefly.dtb \ - px30-engicam-px30-core-ctouch2.dtb \ - px30-engicam-px30-core-ctouch2-of10.dtb \ - px30-engicam-px30-core-edimm2.2.dtb \ - rk3326-odroid-go2.dtb - dtb-$(CONFIG_ROCKCHIP_RK3036) += \ rk3036-sdk.dtb diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi deleted file mode 100644 index 3429e124d95..00000000000 --- a/arch/arm/dts/px30-engicam-common.dtsi +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/ { - aliases { - mmc1 = &sdmmc; - mmc2 = &sdio; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; /* +5V */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&xin32k>; - clock-names = "ext_clock"; - post-power-on-delay-ms = <80>; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - }; - - vcc3v3_btreg: vcc3v3-btreg { - compatible = "regulator-gpio"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&bt_enable_h>; - regulator-name = "btreg-gpio-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - states = <3300000 0x0>; - }; - - vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_rf_aux_mod"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; -}; - -&sdio { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - }; -}; - -&gmac { - clock_in_out = "output"; - phy-supply = <&vcc_3v3>; /* +3V3_SOM */ - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&sdmmc { - cap-sd-highspeed; - card-detect-delay = <800>; - vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ - vqmmc-supply = <&vcc_3v3>; - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "okay"; - }; -}; - -&uart2 { - pinctrl-0 = <&uart2m1_xfer>; - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi deleted file mode 100644 index bf10a3d29fc..00000000000 --- a/arch/arm/dts/px30-engicam-ctouch2.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -#include "px30-engicam-common.dtsi" - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio_pwrseq { - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -}; - -&vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi deleted file mode 100644 index 449b8eb6454..00000000000 --- a/arch/arm/dts/px30-engicam-edimm2.2.dtsi +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -#include "px30-engicam-common.dtsi" - -/ { - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - panel { - compatible = "yes-optoelectronics,ytc700tlag-05-201c"; - backlight = <&backlight>; - data-mapping = "vesa-24"; - power-supply = <&vcc3v3_lcd>; - - port { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out_panel>; - }; - }; - }; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi_dphy { - status = "okay"; -}; - -/* LVDS_B(secondary) */ -&lvds { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts deleted file mode 100644 index 47aa30505a4..00000000000 --- a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-ctouch2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame"; - compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core", - "rockchip,px30"; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - panel { - compatible = "ampire,am-1280800n3tzqw-t00h"; - backlight = <&backlight>; - power-supply = <&vcc3v3_lcd>; - data-mapping = "vesa-24"; - - port { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out_panel>; - }; - }; - }; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi_dphy { - status = "okay"; -}; - -&lvds { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts deleted file mode 100644 index 5a0ecb8faec..00000000000 --- a/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-ctouch2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core C.TOUCH 2.0"; - compatible = "engicam,px30-core-ctouch2", "engicam,px30-core", - "rockchip,px30"; - - chosen { - stdout-path = "serial2:115200n8"; - }; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts deleted file mode 100644 index d759478e1c8..00000000000 --- a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-edimm2.2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; - compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core", - "rockchip,px30"; - - chosen { - stdout-path = "serial2:115200n8"; - }; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio_pwrseq { - reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>; -}; - -&vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core.dtsi b/arch/arm/dts/px30-engicam-px30-core.dtsi deleted file mode 100644 index 7249871530a..00000000000 --- a/arch/arm/dts/px30-engicam-px30-core.dtsi +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons - * Copyright (c) 2020 Amarula Solutons(India) - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> - -/ { - compatible = "engicam,px30-core", "rockchip,px30"; - - aliases { - mmc0 = &emmc; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - cap-mmc-highspeed; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v3_sys: DCDC_REG5 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v0: LDO_REG1 { - regulator-name = "vcc_1v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v0_pmu: LDO_REG4 { - regulator-name = "vcc3v0_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v3_lcd: SWITCH_REG1 { - regulator-boot-on; - regulator-name = "vcc3v3_lcd"; - }; - - vcc5v0_host: SWITCH_REG2 { - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vcc_3v3>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - status = "okay"; -}; - -&pinctrl { - pmic { - pmic_int: pmic_int { - rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc_3v3>; - pmuio2-supply = <&vcc_3v3>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts deleted file mode 100644 index 848bc39cf86..00000000000 --- a/arch/arm/dts/px30-evb.dts +++ /dev/null @@ -1,634 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include "px30.dtsi" - -/ { - model = "Rockchip PX30 EVB"; - compatible = "rockchip,px30-evb", "rockchip,px30"; - - aliases { - mmc0 = &sdmmc; - mmc1 = &sdio; - mmc2 = &emmc; - }; - - chosen { - stdout-path = "serial5:115200n8"; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - esc-key { - label = "esc"; - linux,code = <KEY_ESC>; - press-threshold-microvolt = <1310000>; - }; - - home-key { - label = "home"; - linux,code = <KEY_HOME>; - press-threshold-microvolt = <624000>; - }; - - menu-key { - label = "menu"; - linux,code = <KEY_MENU>; - press-threshold-microvolt = <987000>; - }; - - vol-down-key { - label = "volume down"; - linux,code = <KEY_VOLUMEDOWN>; - press-threshold-microvolt = <300000>; - }; - - vol-up-key { - label = "volume up"; - linux,code = <KEY_VOLUMEUP>; - press-threshold-microvolt = <17000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 25000 0>; - power-supply = <&vcc3v3_lcd>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ - }; - - vcc5v0_sys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&csi_dphy { - status = "okay"; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi { - status = "okay"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "xinpeng,xpp055c272"; - reg = <0>; - backlight = <&backlight>; - iovcc-supply = <&vcc_1v8>; - vci-supply = <&vcc3v3_lcd>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&dsi_dphy { - status = "okay"; -}; - -&emmc { - cap-mmc-highspeed; - mmc-hs200-1_8v; - non-removable; - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v0>; - vqmmc-supply = <&vccio_flash>; - status = "okay"; -}; - -&gmac { - clock_in_out = "output"; - phy-supply = <&vcc_rmii>; - snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_log>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <0>; - clock-output-names = "xin32k"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v0: vcc_rmii: DCDC_REG4 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_sys: DCDC_REG5 { - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v0: LDO_REG1 { - regulator-name = "vcc_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v0_pmu: LDO_REG4 { - regulator-name = "vcc3v0_pmu"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc2v8_dvp: LDO_REG7 { - regulator-name = "vcc2v8_dvp"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v5_dvp: LDO_REG9 { - regulator-name = "vcc1v5_dvp"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcc3v3_lcd: SWITCH_REG1 { - regulator-name = "vcc3v3_lcd"; - regulator-boot-on; - }; - - vcc5v0_host: SWITCH_REG2 { - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - sensor@d { - compatible = "asahi-kasei,ak8963"; - reg = <0x0d>; - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&vcc3v0_pmu>; - mount-matrix = "1", /* x0 */ - "0", /* y0 */ - "0", /* z0 */ - "0", /* x1 */ - "1", /* y1 */ - "0", /* z1 */ - "0", /* x2 */ - "0", /* y2 */ - "1"; /* z2 */ - }; - - touchscreen@14 { - compatible = "goodix,gt1151"; - reg = <0x14>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; - irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - VDDIO-supply = <&vcc3v3_lcd>; - }; - - sensor@4c { - compatible = "fsl,mma7660"; - reg = <0x4c>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&i2c2 { - status = "okay"; - - clock-frequency = <100000>; - - /* These are relatively safe rise/fall times; TODO: measure */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - ov5695: ov5695@36 { - compatible = "ovti,ov5695"; - reg = <0x36>; - avdd-supply = <&vcc2v8_dvp>; - clocks = <&cru SCLK_CIF_OUT>; - clock-names = "xvclk"; - dvdd-supply = <&vcc1v5_dvp>; - dovdd-supply = <&vcc1v8_dvp>; - pinctrl-names = "default"; - pinctrl-0 = <&cif_clkout_m0>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - - port { - ucam_out: endpoint { - remote-endpoint = <&mipi_in_ucam>; - data-lanes = <1 2>; - }; - }; - }; -}; - -&i2s1_2ch { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - vccio1-supply = <&vccio_sdio>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v0>; - vccio4-supply = <&vcc3v0_pmu>; - vccio5-supply = <&vcc_3v0>; - vccio6-supply = <&vccio_flash>; -}; - -&isp { - status = "okay"; - - ports { - port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; - data-lanes = <1 2>; - remote-endpoint = <&ucam_out>; - }; - }; - }; -}; - -&isp_mmu { - status = "okay"; -}; - -&pinctrl { - headphone { - hp_det: hp-det { - rockchip,pins = - <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = - <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = - <0 RK_PA4 1 &pcfg_pull_none>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = - <0 RK_PA4 2 &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - status = "okay"; - - pmuio1-supply = <&vcc3v0_pmu>; - pmuio2-supply = <&vcc3v0_pmu>; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <800>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdio { - cap-sd-highspeed; - keep-power-in-suspend; - non-removable; - mmc-pwrseq = <&sdio_pwrseq>; - sd-uhs-sdr104; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "okay"; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi index e04766ad09c..29ea2763636 100644 --- a/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi +++ b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi @@ -15,14 +15,6 @@ }; }; -&binman { - simple-bin { - fit { - offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>; - }; - }; -}; - &emmc_clk { bootph-all; }; diff --git a/arch/arm/dts/px30-ringneck-haikou.dts b/arch/arm/dts/px30-ringneck-haikou.dts deleted file mode 100644 index 08a3ad3e7ae..00000000000 --- a/arch/arm/dts/px30-ringneck-haikou.dts +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "px30-ringneck.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit"; - compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; - - aliases { - mmc2 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&haikou_keys_pin>; - pinctrl-names = "default"; - - button-batlow-n { - label = "BATLOW#"; - linux,code = <KEY_BATTERY>; - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; - }; - - button-slp-btn-n { - label = "SLP_BTN#"; - linux,code = <KEY_SLEEP>; - gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; - }; - - button-wake-n { - label = "WAKE#"; - linux,code = <KEY_WAKEUP>; - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - - switch-lid-btn-n { - label = "LID_BTN#"; - linux,code = <SW_LID>; - linux,input-type = <EV_SW>; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - - sd_card_led: led-1 { - gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc2"; - function = LED_FUNCTION_SD; - color = <LED_COLOR_ID_BLUE>; - }; - }; - - i2s0-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Haikou,I2S-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - clocks = <&sgtl5000_clk>; - sound-dai = <&sgtl5000>; - }; - - simple-audio-card,cpu { - bitclock-master; - frame-master; - sound-dai = <&i2s0_8ch>; - }; - }; - - sgtl5000_clk: sgtl5000-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - dc_12v: dc-12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_baseboard: vcc5v0-baseboard-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vdda_codec: vdda-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "vdda_codec"; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_baseboard>; - }; - - vddd_codec: vddd-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "vddd_codec"; - regulator-boot-on; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <1600000>; - vin-supply = <&vcc5v0_baseboard>; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&sgtl5000_clk>; - #sound-dai-cells = <0>; - VDDA-supply = <&vdda_codec>; - VDDIO-supply = <&vcc3v3_baseboard>; - VDDD-supply = <&vddd_codec>; - }; -}; - -&i2c3 { - eeprom@50 { - reg = <0x50>; - compatible = "atmel,24c01"; - pagesize = <8>; - size = <128>; - vcc-supply = <&vcc3v3_baseboard>; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&pinctrl { - haikou { - haikou_keys_pin: haikou-keys-pin { - rockchip,pins = - /* WAKE# */ - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, - /* LID_BTN */ - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ - <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&sdmmc { - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; - disable-wp; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&u2phy_otg { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart5 { - pinctrl-0 = <&uart5_xfer>; - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-ringneck.dtsi b/arch/arm/dts/px30-ringneck.dtsi deleted file mode 100644 index 12397755830..00000000000 --- a/arch/arm/dts/px30-ringneck.dtsi +++ /dev/null @@ -1,382 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "px30.dtsi" -#include <dt-bindings/leds/common.h> - -/ { - aliases { - mmc0 = &emmc; - mmc1 = &sdio; - rtc0 = &rtc_twi; - rtc1 = &rk809; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pin>; - status = "okay"; - - module_led: led-0 { - gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - linux,default-trigger = "heartbeat"; - color = <LED_COLOR_ID_AMBER>; - }; - }; - - vcc5v0_sys: vccsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - supports-emmc; - mmc-pwrseq = <&emmc_pwrseq>; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_emmc>; - - status = "okay"; -}; - -/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ -&gmac { - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - phy-supply = <&vcc_3v3>; - clock_in_out = "output"; -}; - -&gpio2 { - /* - * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module - * eMMC powered-down initially (in fact it keeps the reset signal - * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after - * the SPL has been booted from SD Card. - */ - bios-disable-override-hog { - gpios = <RK_PB5 GPIO_ACTIVE_LOW>; - output-high; - line-name = "bios_disable_override"; - gpio-hog; - }; - - /* - * The BIOS_DISABLE hog is a feedback pin for the actual status of the - * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually - * represents the state of a switch on the baseboard. - */ - bios-disable-n-hog { - gpios = <RK_PC2 GPIO_ACTIVE_LOW>; - line-name = "bios_disable"; - input; - gpio-hog; - }; -}; - -&gpu { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&pmic_int>; - pinctrl-names = "default"; - #clock-cells = <0>; - clock-output-names = "xin32k"; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_3v3>; - vcc6-supply = <&vcc_3v3>; - vcc7-supply = <&vcc_3v3>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v0_1v8: vcc_emmc: DCDC_REG4 { - regulator-name = "vcc_3v0_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_3v3: DCDC_REG5 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_1v0: LDO_REG3 { - regulator-name = "vcc_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vcc_lcd"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8_lcd: LDO_REG8 { - regulator-name = "vcc_1v8_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_1v8: LDO_REG9 { - regulator-name = "vcca_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - /* SE05x is limited to Fast Mode */ - clock-frequency = <400000>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; -}; - -&i2c3 { - status = "okay"; -}; - -&i2s0_8ch { - rockchip,trcm-sync-tx-only; - - pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx - &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_emmc>; - vccio-oscgpi-supply = <&vcc_3v3>; - - status = "okay"; -}; - -&pinctrl { - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - module_led_pin: module-led-pin { - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = - <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - vqmmc-supply = <&vccio_sd>; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; -}; - -&u2phy_host { - status = "okay"; -}; - -/* Mule UCAN */ -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi index 046da022ffe..59fa9f43a97 100644 --- a/arch/arm/dts/px30-u-boot.dtsi +++ b/arch/arm/dts/px30-u-boot.dtsi @@ -33,11 +33,27 @@ bootph-all; }; +&uart2m0_xfer { + bootph-all; +}; + &uart5 { clock-frequency = <24000000>; bootph-all; }; +&uart5_cts { + bootph-all; +}; + +&uart5_rts { + bootph-all; +}; + +&uart5_xfer { + bootph-all; +}; + &sdmmc { bootph-all; diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi index 04028bf649f..a31dea8db3e 100644 --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -74,6 +74,21 @@ bootph-all; }; +&rk817 { + regulators { + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; +}; + &saradc { bootph-all; status = "okay"; diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts deleted file mode 100644 index ea0695b51ec..00000000000 --- a/arch/arm/dts/rk3326-odroid-go2.dts +++ /dev/null @@ -1,642 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Hardkernel Co., Ltd - * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include "rk3326.dtsi" - -/ { - model = "ODROID-GO Advance"; - compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; - - aliases { - mmc0 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - adc-joystick { - compatible = "adc-joystick"; - io-channels = <&saradc 1>, - <&saradc 2>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - abs-flat = <10>; - abs-fuzz = <10>; - abs-range = <172 772>; - linux,code = <ABS_X>; - }; - - axis@1 { - reg = <1>; - abs-flat = <10>; - abs-fuzz = <10>; - abs-range = <278 815>; - linux,code = <ABS_Y>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_bl>; - pwms = <&pwm1 0 25000 0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&btn_pins>; - - /* - * *** ODROIDGO2-Advance Switch layout *** - * |------------------------------------------------| - * | sw15 sw16 | - * |------------------------------------------------| - * | sw1 |-------------------| sw8 | - * | sw3 sw4 | | sw7 sw5 | - * | sw2 | LCD Display | sw6 | - * | | | | - * | |-------------------| | - * | sw9 sw10 sw11 sw12 sw13 sw14 | - * |------------------------------------------------| - */ - - sw1 { - gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; - label = "DPAD-UP"; - linux,code = <BTN_DPAD_UP>; - }; - sw2 { - gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; - label = "DPAD-DOWN"; - linux,code = <BTN_DPAD_DOWN>; - }; - sw3 { - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - label = "DPAD-LEFT"; - linux,code = <BTN_DPAD_LEFT>; - }; - sw4 { - gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; - label = "DPAD-RIGHT"; - linux,code = <BTN_DPAD_RIGHT>; - }; - sw5 { - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; - label = "BTN-A"; - linux,code = <BTN_EAST>; - }; - sw6 { - gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; - label = "BTN-B"; - linux,code = <BTN_SOUTH>; - }; - sw7 { - gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; - label = "BTN-Y"; - linux,code = <BTN_WEST>; - }; - sw8 { - gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; - label = "BTN-X"; - linux,code = <BTN_NORTH>; - }; - sw9 { - gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; - label = "F1"; - linux,code = <BTN_TRIGGER_HAPPY1>; - }; - sw10 { - gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; - label = "F2"; - linux,code = <BTN_TRIGGER_HAPPY2>; - }; - sw11 { - gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; - label = "F3"; - linux,code = <BTN_TRIGGER_HAPPY3>; - }; - sw12 { - gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; - label = "F4"; - linux,code = <BTN_TRIGGER_HAPPY4>; - }; - sw13 { - gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; - label = "F5"; - linux,code = <BTN_TRIGGER_HAPPY5>; - }; - sw14 { - gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; - label = "F6"; - linux,code = <BTN_TRIGGER_HAPPY6>; - }; - sw15 { - gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; - label = "TOP-LEFT"; - linux,code = <BTN_TL>; - }; - sw16 { - gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; - label = "TOP-RIGHT"; - linux,code = <BTN_TR>; - }; - }; - - leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - - blue_led: led-0 { - label = "blue:heartbeat"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - rk817-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Analog"; - simple-audio-card,format = "i2s"; - simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Speaker"; - simple-audio-card,routing = - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker", "SPKO"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_2ch>; - }; - }; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v8_sys"; - regulator-always-on; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - }; - - vcc_host: vcc_host { - compatible = "regulator-fixed"; - regulator-name = "vcc_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - vin-supply = <&usb_midu>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&cru { - assigned-clocks = <&cru PLL_NPLL>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, - <&cru PLL_CPLL>; - - assigned-clock-rates = <1188000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>, - <17000000>; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi { - status = "okay"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "elida,kd35t133"; - reg = <0>; - backlight = <&backlight>; - iovcc-supply = <&vcc_lcd>; - reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - rotation = <270>; - vdd-supply = <&vcc_lcd>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&dsi_dphy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_logic>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <16>; - i2c-scl-rising-time-ns = <280>; - status = "okay"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - vcc8-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - usb_midu: BOOST { - regulator-name = "usb_midu"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5400000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; -}; - -/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ -&i2c1 { - clock-frequency = <400000>; - status = "okay"; -}; - -/* I2S 1 Channel Used */ -&i2s1_2ch { - status = "okay"; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - status = "okay"; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - cap-sd-highspeed; - card-detect-delay = <200>; - cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <2>; - spi-tx-bus-width = <1>; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "disabled"; - }; -}; - -&usb20_otg { - status = "okay"; -}; - -/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2m1_xfer>; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&pinctrl { - btns { - btn_pins: btn-pins { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dc_det: dc-det { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pmic_int: pmic-int { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi index 5a9bd320ec4..55895d0dd19 100644 --- a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi @@ -33,12 +33,6 @@ }; &binman { - simple-bin { - fit { - offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>; - }; - }; - #ifdef CONFIG_ROCKCHIP_SPI_IMAGE simple-bin-spi { fit { diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi new file mode 100644 index 00000000000..af96d2fa8fb --- /dev/null +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#include "rk3588-u-boot.dtsi" diff --git a/arch/arm/dts/rk3588-tiger-haikou-u-boot.dtsi b/arch/arm/dts/rk3588-tiger-haikou-u-boot.dtsi new file mode 100644 index 00000000000..275ae6fdaea --- /dev/null +++ b/arch/arm/dts/rk3588-tiger-haikou-u-boot.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Theobroma Systems Design und Consulting GmbH + */ + +#include "rk3588-u-boot.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; + }; +}; + +&emmc_pwrseq { + bootph-pre-ram; + bootph-some-ram; +}; + +&emmc_reset { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&sdhci { + /* U-Boot currently cannot handle anything below HS200 for eMMC on RK3588 */ + /delete-property/ mmc-ddr-1_8v; + /delete-property/ cap-mmc-highspeed; +}; + +&uart2m2_xfer { + bootph-all; +}; diff --git a/arch/arm/dts/rk3588-u-boot.dtsi b/arch/arm/dts/rk3588-u-boot.dtsi index 4623580c610..bfe6645c30e 100644 --- a/arch/arm/dts/rk3588-u-boot.dtsi +++ b/arch/arm/dts/rk3588-u-boot.dtsi @@ -4,77 +4,3 @@ */ #include "rk3588s-u-boot.dtsi" - -/ { - usb_host1_xhci: usb@fc400000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc400000 0x0 0x400000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, - <&cru ACLK_USB3OTG1>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG1>; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - usbdpphy1_grf: syscon@fd5cc000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5cc000 0x0 0x4000>; - }; - - usb2phy1_grf: syscon@fd5d4000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d4000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy1: usb2phy@4000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x4000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy1"; - interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usbdp_phy1: phy@fed90000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed90000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY1_IMMORTAL>, - <&cru PCLK_USBDPPHY1>, - <&u2phy1>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, - <&cru SRST_USBDP_COMBO_PHY1_CMN>, - <&cru SRST_USBDP_COMBO_PHY1_LANE>, - <&cru SRST_USBDP_COMBO_PHY1_PCS>, - <&cru SRST_P_USBDPPHY1>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy1_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy1_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; -}; diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index e9d38d5c83b..09d8b311cec 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -19,95 +19,10 @@ bootph-all; }; - usb_host0_xhci: usb@fc000000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc000000 0x0 0x400000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, - <&cru ACLK_USB3OTG0>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG0>; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - vo0_grf: syscon@fd5a6000 { - compatible = "rockchip,rk3588-vo-grf", "syscon"; - reg = <0x0 0xfd5a6000 0x0 0x2000>; - clocks = <&cru PCLK_VO0GRF>; - }; - - usb_grf: syscon@fd5ac000 { - compatible = "rockchip,rk3588-usb-grf", "syscon"; - reg = <0x0 0xfd5ac000 0x0 0x4000>; - }; - - usbdpphy0_grf: syscon@fd5c8000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5c8000 0x0 0x4000>; - }; - - usb2phy0_grf: syscon@fd5d0000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d0000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy0: usb2phy@0 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x0 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy0"; - interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy0_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - rng: rng@fe378000 { compatible = "rockchip,trngv1"; reg = <0x0 0xfe378000 0x0 0x200>; }; - - usbdp_phy0: phy@fed80000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed80000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY0_IMMORTAL>, - <&cru PCLK_USBDPPHY0>, - <&u2phy0>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, - <&cru SRST_USBDP_COMBO_PHY0_CMN>, - <&cru SRST_USBDP_COMBO_PHY0_LANE>, - <&cru SRST_USBDP_COMBO_PHY0_PCS>, - <&cru SRST_P_USBDPPHY0>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy0_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy0_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; }; #ifdef CONFIG_ROCKCHIP_SPI_IMAGE diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 661e7fd1c9f..14b3ab1a572 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -3,6 +3,7 @@ if ARCH_ROCKCHIP config ROCKCHIP_PX30 bool "Support Rockchip PX30" select ARM64 + imply OF_UPSTREAM select SUPPORT_SPL select SUPPORT_TPL select SPL diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index 820e979abb1..9a35c7d9cc2 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -161,6 +161,31 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_SIGE7_RK3588 + bool "ArmSoM Sige7 RK3588 board" + select BOARD_LATE_INIT + help + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) + by ArmSoM. + + There are two variants depending on the DRAM size : 8G and 16G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 8/16GB memory LPDDR4x + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + 64GB/128GB on board eMMC + uSD slot + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C + 1x HDMI 2.1 output + 2x 2.5 Gbps Ethernet port + 40-pin IO header including UART, SPI and I2C + USB PD over USB Type-C + Size: 92mm x 62mm + config TARGET_QUARTZPRO64_RK3588 bool "Pine64 QuartzPro64 RK3588 board" select BOARD_LATE_INIT @@ -168,6 +193,36 @@ config TARGET_QUARTZPRO64_RK3588 Pine64 QuartzPro64 is a Rockchip RK3588 based SBC (Single Board Computer) by Pine64. +config TARGET_TIGER_RK3588 + bool "Theobroma Systems SOM-RK3588-Q7 (Tiger)" + select BOARD_LATE_INIT + help + The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 + connector) system-on-module from Theobroma Systems, featuring the + Rockchip RK3588. + + It provides the following feature set: + * up to 16GB LPDDR4x + * on-module eMMC + * SD card (on a baseboard) via edge connector + * Gigabit Ethernet with on-module GbE PHY + * HDMI/eDP + * MIPI-DSI + * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7) + * HDMI input over FPC connector + * CAN + * USB + - 1x USB 3.0 dual-role (direct connection) + - 2x USB 3.0 host + 1x USB 2.0 host + * PCIe + - 1x PCIe 2.1 Gen3, 4 lanes + - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes + * on-module ATtiny816 companion controller, implementing: + - low-power RTC functionality (ISL1208 emulation) + - fan controller (AMC6821 emulation) + * on-module Secure Element with Global Platform 2.2.1 compliant + JavaCard environment + config TARGET_TURINGRK1_RK3588 bool "Turing Machines RK1 RK3588 board" select BOARD_LATE_INIT @@ -230,6 +285,7 @@ config ROCKCHIP_COMMON_STACK_ADDR config TEXT_BASE default 0x00a00000 +source "board/armsom/sige7-rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/indiedroid/nova/Kconfig" @@ -240,5 +296,6 @@ source "board/radxa/rock5b-rk3588/Kconfig" source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig" +source "board/theobroma-systems/tiger_rk3588/Kconfig" endif diff --git a/board/armsom/sige7-rk3588/Kconfig b/board/armsom/sige7-rk3588/Kconfig new file mode 100644 index 00000000000..793985f531b --- /dev/null +++ b/board/armsom/sige7-rk3588/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SIGE7_RK3588 + +config SYS_BOARD + default "sige7-rk3588" + +config SYS_VENDOR + default "armsom" + +config SYS_CONFIG_NAME + default "sige7-rk3588" + +endif diff --git a/board/armsom/sige7-rk3588/MAINTAINERS b/board/armsom/sige7-rk3588/MAINTAINERS new file mode 100644 index 00000000000..0fba39b76c2 --- /dev/null +++ b/board/armsom/sige7-rk3588/MAINTAINERS @@ -0,0 +1,7 @@ +SIGE7-RK3588 +M: Jianfeng Liu <liujianfeng1994@gmail.com> +S: Maintained +F: board/armsom/sige7-rk3588 +F: include/configs/sige7-rk3588.h +F: configs/sige7-rk3588_defconfig +F: arch/arm/dts/rk3588-armsom-sige7* diff --git a/board/theobroma-systems/tiger_rk3588/Kconfig b/board/theobroma-systems/tiger_rk3588/Kconfig new file mode 100644 index 00000000000..2c6ac6a9a83 --- /dev/null +++ b/board/theobroma-systems/tiger_rk3588/Kconfig @@ -0,0 +1,16 @@ +if TARGET_TIGER_RK3588 + +config SYS_BOARD + default "tiger_rk3588" + +config SYS_VENDOR + default "theobroma-systems" + +config SYS_CONFIG_NAME + default "tiger_rk3588" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ENV_IS_NOWHERE + +endif diff --git a/board/theobroma-systems/tiger_rk3588/MAINTAINERS b/board/theobroma-systems/tiger_rk3588/MAINTAINERS new file mode 100644 index 00000000000..e5aab4b29f3 --- /dev/null +++ b/board/theobroma-systems/tiger_rk3588/MAINTAINERS @@ -0,0 +1,13 @@ +TIGER-RK3588 (SOM-RK3588-Q7) +M: Klaus Goger <klaus.goger@cherry.de> +M: Quentin Schulz <quentin.schulz@cherry.de> +M: Heiko Stuebner <heiko.stuebner@cherry.de> +S: Maintained +F: board/theobroma-systems/tiger_rk3588 +F: board/theobroma-systems/common +F: doc/board/theobroma-systems/ +F: include/configs/tiger_rk3588.h +F: arch/arm/dts/rk3588-tiger* +F: configs/tiger-rk3588_defconfig +W: https://embedded.cherry.de/product/tiger-som-rk3588-q7/ +T: git git://git.embedded.cherry.de/tiger-u-boot.git diff --git a/board/theobroma-systems/tiger_rk3588/Makefile b/board/theobroma-systems/tiger_rk3588/Makefile new file mode 100644 index 00000000000..5c4c484657a --- /dev/null +++ b/board/theobroma-systems/tiger_rk3588/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (c) 2024 Theobroma Systems Design und Consulting GmbH +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += tiger_rk3588.o +ifneq ($(CONFIG_SPL_BUILD),y) +obj-y += ../common/common.o +endif diff --git a/board/theobroma-systems/tiger_rk3588/tiger_rk3588.c b/board/theobroma-systems/tiger_rk3588/tiger_rk3588.c new file mode 100644 index 00000000000..a6d44f10db3 --- /dev/null +++ b/board/theobroma-systems/tiger_rk3588/tiger_rk3588.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2023 Theobroma Systems Design und Consulting GmbH + */ + +#include <phy.h> +#include <eth_phy.h> + +#include <asm/types.h> +#include <asm/arch-rockchip/cru_rk3588.h> +#include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/ioc_rk3588.h> +#include <asm-generic/u-boot.h> +#include <dm/device.h> +#include <dm/uclass-id.h> +#include <linux/bitfield.h> + +#include "../common/common.h" + +#define GPIO2C3_SEL_MASK GENMASK(15, 12) +#define GPIO2C3_ETH0_REFCLKO_25M FIELD_PREP(GPIO2C3_SEL_MASK, 1) + +#define REFCLKO25M_ETH0_OUT_SEL_MASK BIT(15) +#define REFCLKO25M_ETH0_OUT_SEL_CPLL FIELD_PREP(REFCLKO25M_ETH0_OUT_SEL_MASK, 1) +#define REFCLKO25M_ETH0_OUT_DIV_MASK GENMASK(14, 8) +#define REFCLKO25M_ETH0_OUT_DIV(x) FIELD_PREP(REFCLKO25M_ETH0_OUT_DIV_MASK, (x) - 1) + +#define REFCLKO25M_ETH0_OUT_EN BIT(4) + +void setup_eth0refclko(void) +{ + /* Configure and enable ETH0_REFCLKO_25MHz */ + static struct rk3588_bus_ioc * const bus_ioc = (void *)BUS_IOC_BASE; + static struct rk3588_cru * const cru = (void *)CRU_BASE; + + /* 1. Pinmux */ + rk_clrsetreg(&bus_ioc->gpio2c_iomux_sel_l, GPIO2C3_SEL_MASK, GPIO2C3_ETH0_REFCLKO_25M); + /* 2. Parent clock selection + divider => CPLL (1.5GHz) / 60 => 25MHz */ + rk_clrsetreg(&cru->clksel_con[15], + REFCLKO25M_ETH0_OUT_SEL_MASK | REFCLKO25M_ETH0_OUT_DIV_MASK, + REFCLKO25M_ETH0_OUT_SEL_CPLL | REFCLKO25M_ETH0_OUT_DIV(60)); + /* 3. Enable clock */ + rk_clrreg(&cru->clkgate_con[5], REFCLKO25M_ETH0_OUT_EN); +} + +int rockchip_early_misc_init_r(void) +{ + setup_boottargets(); + + setup_eth0refclko(); + + return 0; +} diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig index 73a3c6120e0..488a259e268 100644 --- a/configs/evb-px30_defconfig +++ b/configs/evb-px30_defconfig @@ -2,27 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 -CONFIG_DEFAULT_DEVICE_TREE="px30-evb" -CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-evb" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_EVB_PX30=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y -CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_BASE=0xff178000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y @@ -39,9 +27,9 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set @@ -63,7 +51,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_REGMAP=y diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig index 0a14b393667..3fe1dc3ab10 100644 --- a/configs/firefly-px30_defconfig +++ b/configs/firefly-px30_defconfig @@ -2,27 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_DEFAULT_DEVICE_TREE="px30-firefly" -CONFIG_SPL_TEXT_BASE=0x00000000 CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_EVB_PX30=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -40,9 +28,9 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set @@ -64,6 +52,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y +# CONFIG_OF_UPSTREAM is not set CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig index b69cf4cd057..36bf34d97c8 100644 --- a/configs/jaguar-rk3588_defconfig +++ b/configs/jaguar-rk3588_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x2000 -CONFIG_ENV_SIZE=0x1f000 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-jaguar" CONFIG_ROCKCHIP_RK3588=y CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0 diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index 3c1abb83ed9..a9af4151014 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -2,29 +2,17 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x4000 -CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2" -CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3326-odroid-go2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_ODROID_GO2=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -44,11 +32,11 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 34a0b575991..5319239f989 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -6,7 +6,6 @@ CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_SIZE=0x3000 -CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-puma-haikou" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3399=y @@ -29,7 +28,12 @@ CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y -CONFIG_CMD_BOOTZ=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_CMD_VBE is not set +# CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -41,6 +45,8 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EROFS=y +CONFIG_CMD_SQUASHFS=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_OVERWRITE=y diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig index 87a39e115df..fdcbd8a0fc0 100644 --- a/configs/px30-core-ctouch2-of10-px30_defconfig +++ b/configs/px30-core-ctouch2-of10-px30_defconfig @@ -2,27 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10" -CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2-of10" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_PX30_CORE=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -40,9 +28,9 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig index 7162c117beb..343fd0bf516 100644 --- a/configs/px30-core-ctouch2-px30_defconfig +++ b/configs/px30-core-ctouch2-px30_defconfig @@ -2,27 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2" -CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_PX30_CORE=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -40,9 +28,9 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig index 1182f60358f..aa0bff4667d 100644 --- a/configs/px30-core-edimm2.2-px30_defconfig +++ b/configs/px30-core-edimm2.2-px30_defconfig @@ -2,27 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2" -CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-edimm2.2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_PX30_CORE=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -40,9 +28,9 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index 94179dca3ae..23204794205 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -4,7 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_DEFAULT_DEVICE_TREE="px30-ringneck-haikou" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-ringneck-haikou" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set @@ -14,18 +14,18 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_DEBUG_UART_BASE=0xFF030000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 -CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_BOOTSTD_FULL=y CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_SPL_MAX_SIZE=0x20000 -CONFIG_SPL_PAD_TO=0x0 +CONFIG_SPL_PAD_TO=0x38000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set @@ -34,12 +34,15 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set # CONFIG_TPL_SYS_MALLOC_SIMPLE is not set -# CONFIG_CMD_BOOTD is not set +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_CMD_VBE is not set +# CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -47,9 +50,11 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_SLEEP is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EROFS=y +CONFIG_CMD_SQUASHFS=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_ISO_PARTITION is not set CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig new file mode 100644 index 00000000000..d15fc09fc8d --- /dev/null +++ b/configs/sige7-rk3588_defconfig @@ -0,0 +1,93 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-armsom-sige7" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_SIGE7_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig new file mode 100644 index 00000000000..8fcdd063a3d --- /dev/null +++ b/configs/tiger-rk3588_defconfig @@ -0,0 +1,113 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_GPIO=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-tiger-haikou" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0 +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_TIGER_RK3588=y +CONFIG_DEBUG_UART_BASE=0xfeb50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +# CONFIG_DEBUG_UART_BOARD_INIT is not set +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_BOOTMETH_VBE is not set +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-tiger-haikou.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_CYCLIC=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +# CONFIG_CMD_SF is not set +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MII is not set +# CONFIG_CMD_BLOCK_CACHE is not set +# CONFIG_CMD_EFICONFIG is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EROFS=y +CONFIG_CMD_SQUASHFS=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +# CONFIG_OF_TAG_MIGRATE is not set +CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_SPL_CLK=y +CONFIG_CLK_GPIO=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +# CONFIG_SPI_FLASH is not set +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index cfbf641f494..eaf71673b7f 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -119,6 +119,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3 Model A (rock-3a-rk3568) * rk3588 + - ArmSoM Sige7 (sige7-rk3588) - Rockchip EVB (evb-rk3588) - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588) @@ -130,6 +131,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 5B (rock5b-rk3588) - Rockchip Toybrick TB-RK3588X (toybrick-rk3588) - Theobroma Systems RK3588-SBC Jaguar (jaguar-rk3588) + - Theobroma Systems SOM-RK3588-Q7 - Tiger (tiger-rk3588) - Turing Machines RK1 (turing-rk1-rk3588) - Xunlong Orange Pi 5 (orangepi-5-rk3588s) - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588) diff --git a/doc/board/theobroma-systems/index.rst b/doc/board/theobroma-systems/index.rst index b4da2616c37..73e07f7ebfa 100644 --- a/doc/board/theobroma-systems/index.rst +++ b/doc/board/theobroma-systems/index.rst @@ -9,3 +9,4 @@ Theobroma Systems jaguar_rk3588 puma_rk3399 ringneck_px30 + tiger_rk3588 diff --git a/doc/board/theobroma-systems/tiger_rk3588.rst b/doc/board/theobroma-systems/tiger_rk3588.rst new file mode 100644 index 00000000000..a73eec7fb9b --- /dev/null +++ b/doc/board/theobroma-systems/tiger_rk3588.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +SOM-RK3588-Q7 Tiger +=================== + +The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 +connector) system-on-module from Theobroma Systems, featuring the +Rockchip RK3588. + +It provides the following feature set: + * up to 16GB LPDDR4x + * on-module eMMC + * SD card (on a baseboard) via edge connector + * Gigabit Ethernet with on-module GbE PHY + * HDMI/eDP + * MIPI-DSI + * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7) + * HDMI input over FPC connector + * CAN + * USB + - 1x USB 3.0 dual-role (direct connection) + - 2x USB 3.0 host + 1x USB 2.0 host + * PCIe + - 1x PCIe 2.1 Gen3, 4 lanes + - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes + * on-module ATtiny816 companion controller, implementing: + - low-power RTC functionality (ISL1208 emulation) + - fan controller (AMC6821 emulation) + * on-module Secure Element with Global Platform 2.2.1 compliant + JavaCard environment + +Here is the step-by-step to boot to U-Boot on SOM-RK3588-Q7 Tiger from Theobroma +Systems. + +Get the TF-A and DDR init (TPL) binaries +---------------------------------------- + +.. prompt:: bash + + git clone https://github.com/rockchip-linux/rkbin + cd rkbin + export RKBIN=$(pwd) + export BL31=$RKBIN/bin/rk35/rk3588_bl31_v1.38.elf + export ROCKCHIP_TPL=$RKBIN/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin + sed -i 's/^uart baudrate=.*$/uart baudrate=115200/' tools/ddrbin_param.txt + sed -i 's/^uart iomux=.*$/uart iomux=2/' tools/ddrbin_param.txt + ./tools/ddrbin_tool tools/ddrbin_param.txt "$ROCKCHIP_TPL" + ./tools/boot_merger RKBOOT/RK3588MINIALL.ini + export RKDB=$RKBIN/rk3588_spl_loader_v1.11.112.bin + +This will setup all required external dependencies for compiling U-Boot. This will +be updated in the future once upstream Trusted-Firmware-A supports RK3588 or U-Boot +gains support for open-source DRAM initialization in TPL. + +Build U-Boot +------------ + +.. prompt:: bash + + cd ../u-boot + make CROSS_COMPILE=aarch64-linux-gnu- tiger-rk3588_defconfig all + +This will build ``u-boot-rockchip.bin`` which can be written to an MMC device +(eMMC or SD card). + +Flash the image +--------------- + +Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC. + +SD-Card +~~~~~~~ + +.. prompt:: bash + + dd if=u-boot-rockchip.bin of=/dev/sdX seek=64 + +.. note:: + + Replace ``/dev/sdX`` to match your SD card kernel device. + +eMMC +~~~~ + +``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface +with help of the Rockchip loader binary. + +To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a +micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into +``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch +back to ``Normal Boot`` mode. A new USB device should have appeared on your PC +(check with ``lsusb -d 2207:350b``). + +To flash U-Boot on the eMMC with ``rkdeveloptool``: + +.. prompt:: bash + + git clone https://github.com/rockchip-linux/rkdeveloptool + cd rkdeveloptool + autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make + ./rkdeveloptool db "$RKDB" + ./rkdeveloptool wl 64 ../u-boot-rockchip.bin diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 12ff26a0855..617bb511e4e 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -6,6 +6,7 @@ #include <dm.h> #include <dm/lists.h> +#include <bitfield.h> #include <errno.h> #include <log.h> #include <linux/bitfield.h> @@ -277,10 +278,9 @@ static int rk8xx_probe(struct udevice *dev) return ret; priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; - show_variant = priv->variant; + show_variant = bitfield_extract_by_mask(priv->variant, RK8XX_ID_MSK); switch (priv->variant) { case RK808_ID: - show_variant = 0x808; /* RK808 hardware ID is 0 */ break; case RK805_ID: case RK816_ID: @@ -311,7 +311,7 @@ static int rk8xx_probe(struct udevice *dev) init_data_num = ARRAY_SIZE(rk806_init_reg); break; default: - printf("Unknown PMIC: RK%x!!\n", priv->variant); + printf("Unknown PMIC: RK%x!!\n", show_variant); return -EINVAL; } diff --git a/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts new file mode 100644 index 00000000000..98c622b2764 --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3588.dtsi" + +/ { + model = "ArmSoM Sige7"; + compatible = "armsom,sige7", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g>; + + led_green: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led_red: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +/* phy1 - right ethernet port */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy2 - WiFi */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_g: led-rgb-g { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-rgb-r { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi index 94ecb9b4f98..170501a879d 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi @@ -357,7 +357,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi index c0d4a15323e..d9bf67525e8 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi @@ -182,7 +182,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts index 39d65002add..7d7303f8ecb 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts @@ -452,7 +452,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-tiger-haikou.dts b/dts/upstream/src/arm64/rockchip/rk3588-tiger-haikou.dts index d672198c6b6..e4b7a0a4444 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-tiger-haikou.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588-tiger-haikou.dts @@ -113,6 +113,16 @@ vin-supply = <&dc_12v>; }; + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -137,6 +147,10 @@ status = "okay"; }; +&extcon_usb3 { + status = "okay"; +}; + &gmac0 { status = "okay"; }; @@ -199,6 +213,13 @@ <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb2 { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &sdmmc { @@ -214,6 +235,23 @@ status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -231,25 +269,38 @@ }; &uart2 { - pinctrl-0 = <&uart2m2_xfer>; status = "okay"; }; &uart5 { rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; +}; + +&usbdp_phy0 { status = "okay"; }; -/* host0 on Q7_USB_P2, lower usb3 port */ +&usbdp_phy1 { + status = "okay"; +}; + +/* host0 on Q7_USB_P2, upper usb3 port */ &usb_host0_ehci { status = "okay"; }; -/* host0 on Q7_USB_P2, lower usb3 port */ +/* host0 on Q7_USB_P2, upper usb3 port */ &usb_host0_ohci { status = "okay"; }; +/* host0_xhci on Q7_USB_P1, usb3-otg port */ +&usb_host0_xhci { + dr_mode = "otg"; + extcon = <&extcon_usb3>; + status = "okay"; +}; + /* host1 on Q7_USB_P3, usb2 port */ &usb_host1_ehci { status = "okay"; @@ -260,7 +311,13 @@ status = "okay"; }; -/* host2 on Q7_USB_P2, lower usb3 port */ +/* host1_xhci on Q7_USB_P0, lower usb3 port */ +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +/* host2 on Q7_USB_P2, upper usb3 port */ &usb_host2_xhci { status = "okay"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi index 1eb2543a5fd..aebe1fedd2d 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi @@ -23,6 +23,14 @@ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; + extcon_usb3: extcon-usb3 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_id>; + status = "disabled"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -46,7 +54,7 @@ pcie_refclk_gen: pcie-refclk-gen-clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <1000000000>; + clock-frequency = <100000000>; }; pcie_refclk: pcie-refclk-clock { @@ -139,6 +147,11 @@ snps,reset-delays-us = <0 10000 100000>; }; +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + &i2c1 { pinctrl-0 = <&i2c1m0_xfer>; }; @@ -322,6 +335,13 @@ rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb3 { + usb3_id: usb3-id { + rockchip,pins = + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &saradc { @@ -396,7 +416,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; @@ -683,6 +703,11 @@ status = "okay"; }; +/* Routed to UART0 on the Q7 connector */ +&uart2 { + pinctrl-0 = <&uart2m2_xfer>; +}; + /* Mule-ATtiny UPDI */ &uart4 { pinctrl-0 = <&uart4m2_xfer>; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi index dc08da518a7..6b9206ce4a0 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi @@ -318,7 +318,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588.dtsi b/dts/upstream/src/arm64/rockchip/rk3588.dtsi index 5519c1430cb..5984016b5f9 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588.dtsi @@ -7,6 +7,26 @@ #include "rk3588-pinctrl.dtsi" / { + usb_host1_xhci: usb@fc400000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc400000 0x0 0x400000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG1>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + pcie30_phy_grf: syscon@fd5b8000 { compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; reg = <0x0 0xfd5b8000 0x0 0x10000>; @@ -17,6 +37,36 @@ reg = <0x0 0xfd5c0000 0x0 0x100>; }; + usbdpphy1_grf: syscon@fd5cc000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5cc000 0x0 0x4000>; + }; + + usb2phy1_grf: syscon@fd5d4000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d4000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy1: usb2phy@4000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x4000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + i2s8_8ch: i2s@fddc8000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc8000 0x0 0x1000>; @@ -310,6 +360,28 @@ }; }; + usbdp_phy1: phy@fed90000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed90000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY1_IMMORTAL>, + <&cru PCLK_USBDPPHY1>, + <&u2phy1>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, + <&cru SRST_USBDP_COMBO_PHY1_CMN>, + <&cru SRST_USBDP_COMBO_PHY1_LANE>, + <&cru SRST_USBDP_COMBO_PHY1_PCS>, + <&cru SRST_P_USBDPPHY1>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy1_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy1_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + combphy1_ps: phy@fee10000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee10000 0x0 0x100>; diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts b/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts index e037bf9db75..7f4d7bb9a07 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts @@ -479,7 +479,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts index ce8119cbb82..a5b76e24ceb 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts @@ -528,7 +528,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts b/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts index 25de4362af3..73700d77eed 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts @@ -336,7 +336,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts index 00afb90d4eb..5c99636a1d0 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts @@ -414,7 +414,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi index 87b83c87bd5..6ac5ac8b48a 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi @@ -347,6 +347,11 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { optee: optee { compatible = "linaro,optee-tz"; @@ -394,11 +399,6 @@ #clock-cells = <0>; }; - display_subsystem: display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, @@ -436,6 +436,84 @@ }; }; + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; + }; + + usb_host0_xhci: usb@fc000000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc000000 0x0 0x400000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG0>; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + usb_host0_ehci: usb@fc800000 { compatible = "rockchip,rk3588-ehci", "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>; @@ -501,6 +579,30 @@ status = "disabled"; }; + mmu600_pcie: iommu@fc900000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfc900000 0x0 0x200000>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + + mmu600_php: iommu@fcb00000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfcb00000 0x0 0x200000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>; @@ -516,12 +618,23 @@ reg = <0x0 0xfd5a4000 0x0 0x2000>; }; + vo0_grf: syscon@fd5a6000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a6000 0x0 0x2000>; + clocks = <&cru PCLK_VO0GRF>; + }; + vo1_grf: syscon@fd5a8000 { compatible = "rockchip,rk3588-vo-grf", "syscon"; reg = <0x0 0xfd5a8000 0x0 0x100>; clocks = <&cru PCLK_VO1GRF>; }; + usb_grf: syscon@fd5ac000 { + compatible = "rockchip,rk3588-usb-grf", "syscon"; + reg = <0x0 0xfd5ac000 0x0 0x4000>; + }; + php_grf: syscon@fd5b0000 { compatible = "rockchip,rk3588-php-grf", "syscon"; reg = <0x0 0xfd5b0000 0x0 0x1000>; @@ -537,22 +650,52 @@ reg = <0x0 0xfd5c4000 0x0 0x100>; }; + usbdpphy0_grf: syscon@fd5c8000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5c8000 0x0 0x4000>; + }; + + usb2phy0_grf: syscon@fd5d0000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d0000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2phy@0 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x0 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + usb2phy2_grf: syscon@fd5d8000 { compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; reg = <0x0 0xfd5d8000 0x0 0x4000>; #address-cells = <1>; #size-cells = <1>; - u2phy2: usb2-phy@8000 { + u2phy2: usb2phy@8000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0x8000 0x10>; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy2"; - #clock-cells = <0>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy2_host: host-port { @@ -568,16 +711,16 @@ #address-cells = <1>; #size-cells = <1>; - u2phy3: usb2-phy@c000 { + u2phy3: usb2phy@c000 { compatible = "rockchip,rk3588-usb2phy"; reg = <0xc000 0x10>; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; - reset-names = "phy", "apb"; + #clock-cells = <0>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; clock-names = "phyclk"; clock-output-names = "usb480m_phy3"; - #clock-cells = <0>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; status = "disabled"; u2phy3_host: host-port { @@ -646,74 +789,6 @@ status = "disabled"; }; - vop: vop@fdd90000 { - compatible = "rockchip,rk3588-vop"; - reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; - reg-names = "vop", "gamma-lut"; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, - <&cru HCLK_VOP>, - <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, - <&cru DCLK_VOP2>, - <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; - clock-names = "aclk", - "hclk", - "dclk_vp0", - "dclk_vp1", - "dclk_vp2", - "dclk_vp3", - "pclk_vop"; - iommus = <&vop_mmu>; - power-domains = <&power RK3588_PD_VOP>; - rockchip,grf = <&sys_grf>; - rockchip,vop-grf = <&vop_grf>; - rockchip,vo1-grf = <&vo1_grf>; - rockchip,pmu = <&pmu>; - status = "disabled"; - - vop_out: ports { - #address-cells = <1>; - #size-cells = <0>; - - vp0: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - vp1: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - vp2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - vp3: port@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - }; - - vop_mmu: iommu@fdd97e00 { - compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; - reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3588_PD_VOP>; - status = "disabled"; - }; - uart0: serial@fd890000 { compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; reg = <0x0 0xfd890000 0x0 0x100>; @@ -1084,6 +1159,87 @@ }; }; + av1d: video-codec@fdc70000 { + compatible = "rockchip,rk3588-av1-vpu"; + reg = <0x0 0xfdc70000 0x0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + assigned-clock-rates = <400000000>, <400000000>; + clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3588_PD_AV1>; + resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; + }; + + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + i2s4_8ch: i2s@fddc0000 { compatible = "rockchip,rk3588-i2s-tdm"; reg = <0x0 0xfddc0000 0x0 0x1000>; @@ -1375,6 +1531,16 @@ reg = <0x0 0xfdf82200 0x0 0x20>; }; + dfi: dfi@fe060000 { + reg = <0x00 0xfe060000 0x00 0x10000>; + compatible = "rockchip,rk3588-dfi"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmu1grf>; + }; + pcie2x1l1: pcie@fe180000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; bus-range = <0x30 0x3f>; @@ -1477,16 +1643,6 @@ }; }; - dfi: dfi@fe060000 { - reg = <0x00 0xfe060000 0x00 0x10000>; - compatible = "rockchip,rk3588-dfi"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; - rockchip,pmu = <&pmu1grf>; - }; - gmac1: ethernet@fe1c0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1c0000 0x0 0x10000>; @@ -2380,6 +2536,28 @@ status = "disabled"; }; + usbdp_phy0: phy@fed80000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed80000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY0_IMMORTAL>, + <&cru PCLK_USBDPPHY0>, + <&u2phy0>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, + <&cru SRST_USBDP_COMBO_PHY0_CMN>, + <&cru SRST_USBDP_COMBO_PHY0_LANE>, + <&cru SRST_USBDP_COMBO_PHY0_PCS>, + <&cru SRST_P_USBDPPHY0>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy0_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy0_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + combphy0_ps: phy@fee00000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee00000 0x0 0x100>; @@ -2487,19 +2665,6 @@ #interrupt-cells = <2>; }; }; - - av1d: video-codec@fdc70000 { - compatible = "rockchip,rk3588-av1-vpu"; - reg = <0x0 0xfdc70000 0x0 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vdpu"; - assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - assigned-clock-rates = <400000000>, <400000000>; - clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3588_PD_AV1>; - resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; - }; }; #include "rk3588s-pinctrl.dtsi" diff --git a/include/configs/sige7-rk3588.h b/include/configs/sige7-rk3588.h new file mode 100644 index 00000000000..fd08da568b1 --- /dev/null +++ b/include/configs/sige7-rk3588.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#ifndef __SIGE7_RK3588_H +#define __SIGE7_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __SIGE7_RK3588_H */ diff --git a/include/configs/tiger_rk3588.h b/include/configs/tiger_rk3588.h new file mode 100644 index 00000000000..7a32adfaf2a --- /dev/null +++ b/include/configs/tiger_rk3588.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH + */ + +#ifndef __TIGER_RK3588_H +#define __TIGER_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __TIGER_RK3588_H */ |