diff options
Diffstat (limited to 'arch/arm/dts/sun8i-s3-pinecube.dts')
| -rw-r--r-- | arch/arm/dts/sun8i-s3-pinecube.dts | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts deleted file mode 100644 index e0d4404b595..00000000000 --- a/arch/arm/dts/sun8i-s3-pinecube.dts +++ /dev/null @@ -1,228 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) -/* - * Copyright 2019 Icenowy Zheng <icenowy@aosc.io> - */ - -/dts-v1/; -#include "sun8i-v3.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "PineCube IP Camera"; - compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3"; - - aliases { - serial0 = &uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led1 { - label = "pine64:ir:led1"; - gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ - }; - - led2 { - label = "pine64:ir:led2"; - gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */ - }; - }; - - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_vcc_wifi: vcc-wifi { - compatible = "regulator-fixed"; - regulator-name = "vcc-wifi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */ - vin-supply = <®_dcdc3>; - startup-delay-us = <200000>; - }; - - wifi_pwrseq: pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ - post-power-on-delay-ms = <200>; - }; -}; - -&csi1 { - pinctrl-names = "default"; - pinctrl-0 = <&csi1_8bit_pins>; - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&ov5640_ep>; - bus-width = <8>; - hsync-active = <1>; /* Active high */ - vsync-active = <0>; /* Active low */ - data-active = <1>; /* Active high */ - pclk-sample = <1>; /* Rising */ - }; - }; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pe_pins>; - status = "okay"; - - ov5640: camera@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - pinctrl-names = "default"; - pinctrl-0 = <&csi1_mclk_pin>; - clocks = <&ccu CLK_CSI1_MCLK>; - clock-names = "xclk"; - - AVDD-supply = <®_ldo3>; - DOVDD-supply = <®_ldo3>; - DVDD-supply = <®_ldo4>; - reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */ - powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */ - - port { - ov5640_ep: endpoint { - remote-endpoint = <&csi1_ep>; - bus-width = <8>; - hsync-active = <1>; /* Active high */ - vsync-active = <0>; /* Active low */ - data-active = <1>; /* Active high */ - pclk-sample = <1>; /* Rising */ - }; - }; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-200 { - label = "Setup"; - linux,code = <KEY_SETUP>; - channel = <0>; - voltage = <190000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_dcdc3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc_wifi>; - vqmmc-supply = <®_dcdc3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&pio { - vcc-pd-supply = <®_dcdc3>; - vcc-pe-supply = <®_ldo3>; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-sys-cpu-ephy"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "avdd-dovdd-2v8-csi"; - regulator-soft-start; - regulator-ramp-delay = <1600>; -}; - -®_ldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "dvdd-1v8-csi"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <®_vcc5v0>; - status = "okay"; -}; |