diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/dts/qcom-ipq4019.dtsi | 14 | ||||
| -rw-r--r-- | arch/arm/dts/qcs404-evb.dts | 19 |
3 files changed, 11 insertions, 23 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 294ab9d0a3f..2eef266e1d1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1077,6 +1077,7 @@ config ARCH_SNAPDRAGON select DM select DM_GPIO select DM_SERIAL + select DM_RESET select GPIO_EXTRA_HEADER select MSM_SMEM select OF_CONTROL diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index 0850ae56e9a..f9489e42ea2 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -66,14 +66,6 @@ status = "disabled"; }; - reset: gcc-reset@1800000 { - compatible = "qcom,gcc-reset-ipq4019"; - reg = <0x1800000 0x60000>; - #clock-cells = <1>; - #reset-cells = <1>; - bootph-all; - }; - soc_gpios: pinctrl@1000000 { compatible = "qcom,ipq4019-pinctrl"; reg = <0x1000000 0x300000>; @@ -136,7 +128,7 @@ #phy-cells = <0>; reg = <0x9a000 0x800>; reg-names = "phy_base"; - resets = <&reset USB3_UNIPHY_PHY_ARES>; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; reset-names = "por_rst"; status = "disabled"; }; @@ -146,7 +138,7 @@ #phy-cells = <0>; reg = <0xa6000 0x40>; reg-names = "phy_base"; - resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; reset-names = "por_rst", "srif_rst"; status = "disabled"; }; @@ -179,7 +171,7 @@ #phy-cells = <0>; reg = <0xa8000 0x40>; reg-names = "phy_base"; - resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; reset-names = "por_rst", "srif_rst"; status = "disabled"; }; diff --git a/arch/arm/dts/qcs404-evb.dts b/arch/arm/dts/qcs404-evb.dts index 8d7893c1169..84224a8a3d3 100644 --- a/arch/arm/dts/qcs404-evb.dts +++ b/arch/arm/dts/qcs404-evb.dts @@ -208,11 +208,6 @@ #address-cells = <0x1>; #size-cells = <0x0>; #clock-cells = <1>; - }; - - reset: gcc-reset@1800000 { - compatible = "qcom,gcc-reset-qcs404"; - reg = <0x1800000 0x80000>; #reset-cells = <1>; }; @@ -245,8 +240,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "ahb", "pipe"; - resets = <&reset GCC_USB3_PHY_BCR>, - <&reset GCC_USB3PHY_PHY_BCR>; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "com", "phy"; }; @@ -257,8 +252,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ahb", "sleep"; - resets = <&reset GCC_USB_HS_PHY_CFG_AHB_BCR>, - <&reset GCC_USB2A_PHY_BCR>; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; reset-names = "phy", "por"; }; @@ -269,8 +264,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ahb", "sleep"; - resets = <&reset GCC_QUSB2_PHY_BCR>, - <&reset GCC_USB2_HS_PHY_ONLY_BCR>; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; reset-names = "phy", "por"; }; @@ -335,7 +330,7 @@ <&gcc GCC_ETH_PTP_CLK>, <&gcc GCC_ETH_RGMII_CLK>; - resets = <&reset GCC_EMAC_BCR>; + resets = <&gcc GCC_EMAC_BCR>; reset-names = "emac"; snps,tso; |