diff options
Diffstat (limited to 'board/atmel/at91sam9rlek/at91sam9rlek.c')
| -rw-r--r-- | board/atmel/at91sam9rlek/at91sam9rlek.c | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index af59620d0c0..f05ee322d09 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -20,7 +20,6 @@ #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#include <lcd.h> #include <atmel_lcdc.h> DECLARE_GLOBAL_DATA_PTR; @@ -75,90 +74,6 @@ static void at91sam9rlek_nand_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 240, - .vl_row = 320, - .vl_clk = 4965000, - .vl_sync = ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - .vl_bpix = 3, - .vl_tft = 1, - .vl_hsync_len = 5, - .vl_left_margin = 1, - .vl_right_margin = 33, - .vl_vsync_len = 1, - .vl_upper_margin = 1, - .vl_lower_margin = 0, - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ -} -static void at91sam9rlek_lcd_hw_init(void) -{ - at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ - at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ - at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ - at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ - at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ - at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ - at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> - -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf ("%s\n", U_BOOT_VERSION); - lcd_printf ("(C) 2008 ATMEL Corp\n"); - lcd_printf ("at91support@atmel.com\n"); - lcd_printf ("%s CPU at %s MHz\n", - ATMEL_CPU_NAME, - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; - lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, - nand_size >> 20 ); -} -#endif /* CONFIG_LCD_INFO */ -#endif - #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) { @@ -183,9 +98,6 @@ int board_init(void) #ifdef CONFIG_CMD_NAND at91sam9rlek_nand_hw_init(); #endif -#ifdef CONFIG_LCD - at91sam9rlek_lcd_hw_init(); -#endif return 0; } |