diff options
Diffstat (limited to 'board/raspberrypi/rpi/acpitables.h')
| -rw-r--r-- | board/raspberrypi/rpi/acpitables.h | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/board/raspberrypi/rpi/acpitables.h b/board/raspberrypi/rpi/acpitables.h new file mode 100644 index 00000000000..3ba8f19808c --- /dev/null +++ b/board/raspberrypi/rpi/acpitables.h @@ -0,0 +1,90 @@ +/** @file + * + * RPi defines for constructing ACPI tables + * + * Copyright (c) 2020, Pete Batard <pete@akeo.ie> + * Copyright (c) 2019, ARM Ltd. All rights reserved. + * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com> + * Copyright (c) Microsoft Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause-Patent + * + **/ + +#ifndef __RPI_ACPITABLES_H__ +#define __RPI_ACPITABLES_H__ + +#include <acpi/acpi_table.h> + +// The ASL compiler can't perform arithmetic on MEMORY32FIXED () +// parameters so you can't pass a constant like BASE + OFFSET. +// We therefore define a macro that can perform arithmetic base +// address update with an offset. +#define MEMORY32SETBASE(BufName, MemName, VarName, Offset) \ + CreateDwordField (^BufName, ^MemName._BAS, VarName) \ + Add (BCM2836_SOC_REGISTERS, Offset, VarName) + +//------------------------------------------------------------------------ +// Interrupts. These are specific to each platform +//------------------------------------------------------------------------ +#if defined(CONFIG_TARGET_RPI_3) +#define BCM2836_V3D_BUS_INTERRUPT 0x2A +#define BCM2836_DMA_INTERRUPT 0x3B +#define BCM2836_SPI1_INTERRUPT 0x3D +#define BCM2836_SPI2_INTERRUPT 0x3D +#define BCM2836_HVS_INTERRUPT 0x41 +#define BCM2836_HDMI0_INTERRUPT 0x48 +#define BCM2836_HDMI1_INTERRUPT 0x49 +#define BCM2836_PV2_INTERRUPT 0x4A +#define BCM2836_PV0_INTERRUPT 0x4D +#define BCM2836_PV1_INTERRUPT 0x4E +#define BCM2836_MBOX_INTERRUPT 0x61 +#define BCM2836_VCHIQ_INTERRUPT 0x62 +#define BCM2386_GPIO_INTERRUPT0 0x51 +#define BCM2386_GPIO_INTERRUPT1 0x52 +#define BCM2386_GPIO_INTERRUPT2 0x53 +#define BCM2386_GPIO_INTERRUPT3 0x54 +#define BCM2836_I2C1_INTERRUPT 0x55 +#define BCM2836_I2C2_INTERRUPT 0x55 +#define BCM2836_SPI0_INTERRUPT 0x56 +#define BCM2836_USB_INTERRUPT 0x29 +#define BCM2836_SDHOST_INTERRUPT 0x58 +#define BCM2836_MMCHS1_INTERRUPT 0x5E +#define BCM2836_MINI_UART_INTERRUPT 0x3D +#define BCM2836_PL011_UART_INTERRUPT 0x59 +#elif defined(CONFIG_TARGET_RPI_4) +#define BCM2836_V3D_BUS_INTERRUPT 0x2A +#define BCM2836_DMA_INTERRUPT 0x3B +#define BCM2836_SPI1_INTERRUPT 0x7D +#define BCM2836_SPI2_INTERRUPT 0x7D +#define BCM2836_HVS_INTERRUPT 0x41 +#define BCM2836_HDMI0_INTERRUPT 0x48 +#define BCM2836_HDMI1_INTERRUPT 0x49 +#define BCM2836_PV2_INTERRUPT 0x4A +#define BCM2836_PV0_INTERRUPT 0x4D +#define BCM2836_PV1_INTERRUPT 0x4E +#define BCM2836_MBOX_INTERRUPT 0x41 +#define BCM2836_VCHIQ_INTERRUPT 0x42 +#define BCM2386_GPIO_INTERRUPT0 0x91 +#define BCM2386_GPIO_INTERRUPT1 0x92 +#define BCM2386_GPIO_INTERRUPT2 0x93 +#define BCM2386_GPIO_INTERRUPT3 0x94 +#define BCM2836_I2C1_INTERRUPT 0x95 +#define BCM2836_I2C2_INTERRUPT 0x95 +#define BCM2836_SPI0_INTERRUPT 0x96 +#define BCM2836_USB_INTERRUPT 0x69 +#define BCM2836_SDHOST_INTERRUPT 0x98 +#define BCM2836_MMCHS1_INTERRUPT 0x9E +#define BCM2836_MINI_UART_INTERRUPT 0x7D +#define BCM2836_PL011_UART_INTERRUPT 0x99 +#define GENET_INTERRUPT0 0xBD +#define GENET_INTERRUPT1 0xBE +#define GENET_BASE_ADDRESS 0xFD580000 +#define GENET_LENGTH 0x10000 +#define THERM_SENSOR_BASE_ADDRESS 0xFD5d2200 +#define THERM_SENSOR_LENGTH 0x8 +#else +#error "Unsupported rpi module for ACPI tables" +#endif + +#endif // __ACPITABLES_H__ |