diff options
Diffstat (limited to 'board/renesas/grpeach/lowlevel_init.S')
| -rw-r--r-- | board/renesas/grpeach/lowlevel_init.S | 106 |
1 files changed, 0 insertions, 106 deletions
diff --git a/board/renesas/grpeach/lowlevel_init.S b/board/renesas/grpeach/lowlevel_init.S deleted file mode 100644 index b83c4e86867..00000000000 --- a/board/renesas/grpeach/lowlevel_init.S +++ /dev/null @@ -1,106 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Renesas Electronics - * Copyright (C) 2017 Chris Brandt - */ -#include <config.h> -#include <asm/macro.h> - -/* Watchdog Registers */ -#define RZA1_WDT_BASE 0xFCFE0000 -#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */ -#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */ -#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */ - -/* Standby controller registers (chapter 55) */ -#define RZA1_STBCR_BASE 0xFCFE0020 -#define STBCR1 (RZA1_STBCR_BASE + 0x00) -#define STBCR2 (RZA1_STBCR_BASE + 0x04) -#define STBCR3 (RZA1_STBCR_BASE + 0x400) -#define STBCR4 (RZA1_STBCR_BASE + 0x404) -#define STBCR5 (RZA1_STBCR_BASE + 0x408) -#define STBCR6 (RZA1_STBCR_BASE + 0x40c) -#define STBCR7 (RZA1_STBCR_BASE + 0x410) -#define STBCR8 (RZA1_STBCR_BASE + 0x414) -#define STBCR9 (RZA1_STBCR_BASE + 0x418) -#define STBCR10 (RZA1_STBCR_BASE + 0x41c) -#define STBCR11 (RZA1_STBCR_BASE + 0x420) -#define STBCR12 (RZA1_STBCR_BASE + 0x424) -#define STBCR13 (RZA1_STBCR_BASE + 0x450) - -/* Clock Registers */ -#define RZA1_FRQCR_BASE 0xFCFE0010 -#define FRQCR (RZA1_FRQCR_BASE + 0x00) -#define FRQCR2 (RZA1_FRQCR_BASE + 0x04) - -#define SYSCR1 0xFCFE0400 /* System control register 1 */ -#define SYSCR2 0xFCFE0404 /* System control register 2 */ -#define SYSCR3 0xFCFE0408 /* System control register 3 */ - -/* Disable WDT */ -#define WTCSR_D 0xA518 -#define WTCNT_D 0x5A00 - -/* Enable all peripheral clocks */ -#define STBCR3_D 0x00000000 -#define STBCR4_D 0x00000000 -#define STBCR5_D 0x00000000 -#define STBCR6_D 0x00000000 -#define STBCR7_D 0x00000024 -#define STBCR8_D 0x00000005 -#define STBCR9_D 0x00000000 -#define STBCR10_D 0x00000000 -#define STBCR11_D 0x000000c0 -#define STBCR12_D 0x000000f0 - -/* - * Set all system clocks to full speed. - * On reset, the CPU will be running at 1/2 speed. - * In the Hardware Manual, see Table 6.3 Settable Frequency Ranges - */ -#define FRQCR_D 0x0035 -#define FRQCR2_D 0x0001 - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - /* PL310 init */ - write32 0x3fffff80, 0x00000001 - - /* Disable WDT */ - write16 WTCSR, WTCSR_D - write16 WTCNT, WTCNT_D - - /* Set clocks */ - write16 FRQCR, FRQCR_D - write16 FRQCR2, FRQCR2_D - - /* Enable all peripherals(Standby Control) */ - write8 STBCR3, STBCR3_D - write8 STBCR4, STBCR4_D - write8 STBCR5, STBCR5_D - write8 STBCR6, STBCR6_D - write8 STBCR7, STBCR7_D - write8 STBCR8, STBCR8_D - write8 STBCR9, STBCR9_D - write8 STBCR10, STBCR10_D - write8 STBCR11, STBCR11_D - write8 STBCR12, STBCR12_D - - /* For serial booting, enable read ahead caching to speed things up */ -#define DRCR_0 0x3FEFA00C - write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */ - - /* Enable all internal RAM */ - write8 SYSCR1, 0xFF - write8 SYSCR2, 0xFF - write8 SYSCR3, 0xFF - - nop - /* back to arch calling code */ - mov pc, lr - - .align 4 |