diff options
Diffstat (limited to 'board/ti/omap5_uevm/evm.c')
| -rw-r--r-- | board/ti/omap5_uevm/evm.c | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c deleted file mode 100644 index 09cbd6bf719..00000000000 --- a/board/ti/omap5_uevm/evm.c +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * Aneesh V <aneesh@ti.com> - * Steve Sakoman <steve@sakoman.com> - */ -#include <common.h> -#include <init.h> -#include <net.h> -#include <palmas.h> -#include <asm/arch/omap.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mmc_host_def.h> -#include <serial.h> -#include <tca642x.h> -#include <usb.h> -#include <asm/global_data.h> -#include <linux/delay.h> -#include <linux/usb/gadget.h> -#include <dwc3-uboot.h> -#include <dwc3-omap-uboot.h> -#include <ti-usb-phy-uboot.h> - -#include "mux_data.h" - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP) -#include <sata.h> -#include <usb.h> -#include <asm/gpio.h> -#include <asm/mach-types.h> -#include <asm/arch/clock.h> -#include <asm/arch/ehci.h> -#include <asm/ehci-omap.h> -#include <asm/arch/sata.h> - -#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define DIE_ID_REG_OFFSET 0x200 - -#endif - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP5432 uEVM\n" -}; - -/** - * @brief tca642x_init - uEVM default values for the GPIO expander - * input reg, output reg, polarity reg, configuration reg - */ -struct tca642x_bank_info tca642x_init[] = { - { .input_reg = 0x00, - .output_reg = 0x04, - .polarity_reg = 0x00, - .configuration_reg = 0x80 }, - { .input_reg = 0x00, - .output_reg = 0x00, - .polarity_reg = 0x00, - .configuration_reg = 0xff }, - { .input_reg = 0x00, - .output_reg = 0x00, - .polarity_reg = 0x00, - .configuration_reg = 0x40 }, -}; - -#ifdef CONFIG_USB_DWC3 -static struct dwc3_device usb_otg_ss = { - .maximum_speed = USB_SPEED_SUPER, - .base = OMAP5XX_USB_OTG_SS_BASE, - .tx_fifo_resize = false, - .index = 0, -}; - -static struct dwc3_omap_device usb_otg_ss_glue = { - .base = (void *)OMAP5XX_USB_OTG_SS_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 0, -}; - -static struct ti_usb_phy_device usb_phy_device = { - .pll_ctrl_base = (void *)OMAP5XX_USB3_PHY_PLL_CTRL, - .usb2_phy_power = (void *)OMAP5XX_USB2_PHY_POWER, - .usb3_phy_power = (void *)OMAP5XX_USB3_PHY_POWER, - .index = 0, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - if (index) { - printf("Invalid Controller Index\n"); - return -EINVAL; - } - - if (init == USB_INIT_DEVICE) { - usb_otg_ss.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - enable_usb_clocks(index); - ti_usb_phy_uboot_init(&usb_phy_device); - dwc3_omap_uboot_init(&usb_otg_ss_glue); - dwc3_uboot_init(&usb_otg_ss); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - if (index) { - printf("Invalid Controller Index\n"); - return -EINVAL; - } - - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - disable_usb_clocks(index); - - return 0; -} - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif - -/** - * @brief board_init - * - * Return: 0 - */ -int board_init(void) -{ - gpmc_init(); - gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - tca642x_set_inital_state(CFG_SYS_I2C_TCA642X_ADDR, tca642x_init); - - return 0; -} - -#if defined(CONFIG_SPL_OS_BOOT) -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; - - return 0; -} -#endif /* CONFIG_SPL_OS_BOOT */ - -int board_eth_init(struct bd_info *bis) -{ - return 0; -} - -/** - * @brief misc_init_r - Configure EVM board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * Return: 0 - */ -int misc_init_r(void) -{ -#ifdef CONFIG_PALMAS_POWER - palmas_init_settings(); -#endif - - omap_die_id_usbethaddr(); - - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(struct bd_info *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} -#endif - -#ifdef CONFIG_USB_XHCI_OMAP -/** - * @brief board_usb_init - Configure EVM board specific configurations - * for the LDO's and clocks for the USB blocks. - * - * Return: 0 - */ -int board_usb_init(int index, enum usb_init_type init) -{ - int ret; -#ifdef CONFIG_PALMAS_USB_SS_PWR - ret = palmas_enable_ss_ldo(); -#endif - - return 0; -} -#endif |