diff options
Diffstat (limited to 'dts/upstream/Bindings/iio/adc')
20 files changed, 1253 insertions, 88 deletions
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad4080.yaml b/dts/upstream/Bindings/iio/adc/adi,ad4080.yaml new file mode 100644 index 00000000000..ed849ba1b77 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/adi,ad4080.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive, + successive approximation register (SAR) analog-to-digital converter (ADC). + Maintaining high performance (signal-to-noise and distortion (SINAD) ratio + > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to + service a wide variety of precision, wide bandwidth data acquisition + applications. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad4080 + + reg: + maxItems: 1 + + spi-max-frequency: + description: Configuration of the SPI bus. + maximum: 50000000 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cnv + + vdd33-supply: true + + vdd11-supply: true + + vddldo-supply: true + + iovdd-supply: true + + vrefin-supply: true + + io-backends: + maxItems: 1 + + adi,lvds-cnv-enable: + description: Enable the LVDS signal type on the CNV pin. Default is CMOS. + type: boolean + + adi,num-lanes: + description: + Number of lanes on which the data is sent on the output (DA, DB pins). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - vdd33-supply + - vrefin-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4080"; + reg = <0>; + spi-max-frequency = <10000000>; + vdd33-supply = <&vdd33>; + vddldo-supply = <&vddldo>; + vrefin-supply = <&vrefin>; + clocks = <&cnv>; + clock-names = "cnv"; + io-backends = <&iio_backend>; + }; + }; +... diff --git a/dts/upstream/Bindings/iio/adc/adi,ad4170-4.yaml b/dts/upstream/Bindings/iio/adc/adi,ad4170-4.yaml new file mode 100644 index 00000000000..da93213d12d --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/adi,ad4170-4.yaml @@ -0,0 +1,554 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4170-4 and similar Analog to Digital Converters + +maintainers: + - Marcelo Schmitt <marcelo.schmitt@analog.com> + +description: | + Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters. + Specifications can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +$defs: + reference-buffer: + description: | + Enable precharge buffer, full buffer, or skip reference buffering of + the positive/negative voltage reference. Because the output impedance + of the source driving the voltage reference inputs may be dynamic, + resistive/capacitive combinations of those inputs can cause DC gain + errors if the reference inputs go unbuffered into the ADC. Enable + reference buffering if the provided reference source has dynamic high + impedance output. Note the absolute voltage allowed on REFINn+ and REFINn- + inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are + disabled but narrows to AVSS to AVDD when reference buffering is enabled + or in precharge mode. + $ref: /schemas/types.yaml#/definitions/string + enum: [ precharge, full, disabled ] + default: full + +properties: + compatible: + enum: + - adi,ad4170-4 + - adi,ad4190-4 + - adi,ad4195-4 + + avss-supply: + description: + Reference voltage supply for AVSS. A −2.625V minimum and 0V maximum supply + that powers the chip. If not provided, AVSS is assumed to be at system + ground (0V). + + avdd-supply: + description: + A supply of 4.75V to 5.25V relative to AVSS that powers the chip (AVDD). + + iovdd-supply: + description: 1.7V to 5.25V reference supply to the serial interface (IOVDD). + + refin1p-supply: + description: REFIN+ supply that can be used as reference for conversion. + + refin1n-supply: + description: REFIN- supply that can be used as reference for conversion. + + refin2p-supply: + description: REFIN2+ supply that can be used as reference for conversion. + + refin2n-supply: + description: REFIN2- supply that can be used as reference for conversion. + + spi-cpol: true + + spi-cpha: true + + interrupts: + description: + Interrupt for signaling the completion of conversion results. The data + ready signal (RDY) used as interrupt is by default provided on the SDO + pin. Alternatively, it can be provided on the DIG_AUX1 pin in which case + the chip disables the RDY function on SDO. Thus, there can be only one + data ready interrupt enabled at a time. + + interrupt-names: + description: + Specify which pin should be configured as Data Ready interrupt. + enum: + - sdo + - dig_aux1 + + clocks: + maxItems: 1 + description: + Optional external clock source. Can specify either an external clock or + external crystal. + + clock-names: + enum: + - ext-clk + - xtal + default: ext-clk + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is for the GPIO number: 0 to 3. + The second cell takes standard GPIO flags. + + ldac-gpios: + description: + GPIO connected to DIG_AUX2 pin to be used as LDAC toggle to control the + transfer of data from the DAC_INPUT_A register to the DAC. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + adi,vbias-pins: + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + +allOf: + # Some devices don't have integrated DAC + - if: + properties: + compatible: + contains: + enum: + - adi,ad4190-4 + - adi,ad4195-4 + then: + properties: + ldac-gpios: false + + # Require to specify the interrupt pin when using interrupts + - if: + required: + - interrupts + then: + required: + - interrupt-names + + # If an external clock is set, the internal clock cannot go out and vice versa + - oneOf: + - required: [clocks] + properties: + '#clock-cells': false + - required: ['#clock-cells'] + properties: + clocks: false + +required: + - compatible + - reg + - avdd-supply + - iovdd-supply + - spi-cpol + - spi-cpha + +unevaluatedProperties: false + +patternProperties: + "^channel@[0-9a-f]$": + $ref: /schemas/iio/adc/adc.yaml# + unevaluatedProperties: false + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 15 + + diff-channels: + description: | + This property is used for defining the inputs of a differential + voltage channel. The first value is the positive input and the second + value is the negative input of the channel. + + Besides the analog input pins AIN0 to AIN8, there are special inputs + that can be selected with the following values: + 17: Internal temperature sensor + 18: (AVDD-AVSS)/5 + 19: (IOVDD-DGND)/5 + 20: DAC output + 21: ALDO + 22: DLDO + 23: AVSS + 24: DGND + 25: REFIN+ + 26: REFIN- + 27: REFIN2+ + 28: REFIN2- + 29: REFOUT + For the internal temperature sensor, use the input number for both + inputs (i.e. diff-channels = <17 17>). + items: + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20, 21, 22, 23, 24, 25, + 26, 27, 28, 29] + + adi,reference-select: + description: | + Select the reference source to use when converting on the + specific channel. Valid values are: + 0: REFIN+/REFIN- + 1: REFIN2+/REFIN2− + 2: REFOUT/AVSS (internal reference) + 3: AVDD/AVSS + If not specified, REFOUT/AVSS is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + + adi,positive-reference-buffer: + $ref: '#/$defs/reference-buffer' + + adi,negative-reference-buffer: + $ref: '#/$defs/reference-buffer' + + adi,sensor-type: + description: + The AD4170-4 and similar designs have features to aid interfacing with + load cell weigh scale, RTD, and thermocouple sensors. Each of those + sensor types requires either distinct wiring configuration or + external circuitry for proper sensor operation and can use different + ADC chip functionality on their setups. A key characteristic of those + external sensors is that they must be excited either by voltage supply + or by ADC chip excitation signals. The sensor can then be read through + a pair of analog inputs. This property specifies which particular + sensor type is connected to the ADC so it can be properly setup and + handled. Omit this property for conventional (not weigh scale, RTD, or + thermocouple) ADC channel setups. + $ref: /schemas/types.yaml#/definitions/string + enum: [ weighscale, rtd, thermocouple ] + + adi,excitation-pin-0: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-1: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-2: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-3: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-current-0-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-0 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-1-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-1 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-2-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-2 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-3-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-3 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-ac: + type: boolean + description: + Whether the external sensor has to be AC or DC excited. When omitted, + it is DC excited. + + allOf: + - oneOf: + - required: [single-channel, common-mode-channel] + properties: + diff-channels: false + - required: [diff-channels] + properties: + single-channel: false + common-mode-channel: false + # Usual ADC channels don't need external circuitry excitation. + - if: + not: + required: + - adi,sensor-type + then: + properties: + adi,excitation-pin-0: false + adi,excitation-pin-1: false + adi,excitation-pin-2: false + adi,excitation-pin-3: false + adi,excitation-current-0-microamp: false + adi,excitation-current-1-microamp: false + adi,excitation-current-2-microamp: false + adi,excitation-current-3-microamp: false + adi,excitation-ac: false + # Weigh scale bridge AC excited with one pair of predefined signals. + - if: + allOf: + - properties: + adi,sensor-type: + contains: + const: weighscale + - required: + - adi,excitation-ac + - adi,excitation-pin-2 + - adi,excitation-pin-3 + - not: + required: + - adi,excitation-current-2-microamp + - adi,excitation-current-3-microamp + then: + properties: + adi,excitation-pin-2: + const: 19 + adi,excitation-pin-3: + const: 20 + # Weigh scale bridge AC excited with two pairs of predefined signals. + - if: + allOf: + - properties: + adi,sensor-type: + contains: + const: weighscale + - required: + - adi,excitation-ac + - adi,excitation-pin-0 + - adi,excitation-pin-1 + - adi,excitation-pin-2 + - adi,excitation-pin-3 + - not: + required: + - adi,excitation-current-0-microamp + - adi,excitation-current-1-microamp + - adi,excitation-current-2-microamp + - adi,excitation-current-3-microamp + then: + properties: + adi,excitation-pin-0: + const: 17 + adi,excitation-pin-1: + const: 18 + adi,excitation-pin-2: + const: 19 + adi,excitation-pin-3: + const: 20 + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4170-4"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpol; + spi-cpha; + avdd-supply = <&avdd>; + iovdd-supply = <&iovdd>; + clocks = <&clk>; + clock-names = "xtal"; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "dig_aux1"; + adi,vbias-pins = <8>; + #address-cells = <1>; + #size-cells = <0>; + + // Sample AIN0 with respect to DGND throughout AVDD/DGND input range + // Pseudo-differential unipolar + channel@0 { + reg = <0>; + single-channel = <0>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Weigh scale sensor + channel@1 { + reg = <1>; + bipolar; + diff-channels = <1 2>; + adi,reference-select = <0>; + adi,positive-reference-buffer = "precharge"; + adi,negative-reference-buffer = "precharge"; + adi,sensor-type = "weighscale"; + adi,excitation-pin-2 = <19>; + adi,excitation-pin-3 = <20>; + adi,excitation-ac; + }; + // RTD sensor + channel@2 { + reg = <2>; + bipolar; + diff-channels = <3 4>; + adi,reference-select = <0>; + adi,sensor-type = "rtd"; + adi,excitation-pin-0 = <5>; + adi,excitation-pin-1 = <6>; + adi,excitation-current-0-microamp = <500>; + adi,excitation-current-1-microamp = <500>; + adi,excitation-ac; + }; + // Thermocouple sensor + channel@3 { + reg = <3>; + bipolar; + diff-channels = <7 8>; + adi,reference-select = <0>; + adi,sensor-type = "thermocouple"; + adi,excitation-pin-0 = <18>; + adi,excitation-current-0-microamp = <500>; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4170-4"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpol; + spi-cpha; + avdd-supply = <&avdd>; + iovdd-supply = <&iovdd>; + #clock-cells = <0>; + clock-output-names = "ad4170-clk16mhz"; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "dig_aux1"; + #address-cells = <1>; + #size-cells = <0>; + + // Sample AIN0 with respect to AIN1 throughout AVDD/AVSS input range + // Differential bipolar. If AVSS < 0V, differential true bipolar + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = <3>; + }; + // Sample AIN2 with respect to DGND throughout AVDD/DGND input range + // Pseudo-differential unipolar + channel@1 { + reg = <1>; + single-channel = <2>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Sample AIN3 with respect to 2.5V throughout AVDD/AVSS input range + // Pseudo-differential bipolar + channel@2 { + reg = <2>; + bipolar; + single-channel = <3>; + common-mode-channel = <29>; + adi,reference-select = <3>; + }; + // Sample AIN4 with respect to DGND throughout AVDD/AVSS input range + // Pseudo-differential bipolar + channel@3 { + reg = <3>; + bipolar; + single-channel = <4>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Sample AIN5 with respect to 2.5V throughout AVDD/AVSS input range + // Pseudo-differential unipolar (AD4170-4 datasheet page 46 example) + channel@4 { + reg = <4>; + single-channel = <5>; + common-mode-channel = <29>; + adi,reference-select = <3>; + }; + // Sample AIN6 with respect to 2.5V throughout REFIN+/REFIN- input range + // Pseudo-differential bipolar + channel@5 { + reg = <5>; + bipolar; + single-channel = <6>; + common-mode-channel = <29>; + adi,reference-select = <0>; + }; + // Weigh scale sensor + channel@6 { + reg = <6>; + bipolar; + diff-channels = <7 8>; + adi,reference-select = <0>; + adi,sensor-type = "weighscale"; + adi,excitation-pin-0 = <17>; + adi,excitation-pin-1 = <18>; + adi,excitation-pin-2 = <19>; + adi,excitation-pin-3 = <20>; + adi,excitation-ac; + }; + }; + }; +... diff --git a/dts/upstream/Bindings/iio/adc/adi,ad4851.yaml b/dts/upstream/Bindings/iio/adc/adi,ad4851.yaml index c6676d91b4e..b107322e0ea 100644 --- a/dts/upstream/Bindings/iio/adc/adi,ad4851.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,ad4851.yaml @@ -69,6 +69,8 @@ properties: spi-max-frequency: maximum: 25000000 + spi-3wire: true + '#address-cells': const: 1 diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml index ff4f5c21c54..8dae89ecb64 100644 --- a/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml @@ -25,6 +25,7 @@ description: | * https://www.analog.com/en/products/ad7386-4.html * https://www.analog.com/en/products/ad7387-4.html * https://www.analog.com/en/products/ad7388-4.html + * https://www.analog.com/en/products/ad7389-4.html * https://www.analog.com/en/products/adaq4370-4.html * https://www.analog.com/en/products/adaq4380-4.html * https://www.analog.com/en/products/adaq4381-4.html @@ -49,6 +50,7 @@ properties: - adi,ad7386-4 - adi,ad7387-4 - adi,ad7388-4 + - adi,ad7389-4 - adi,adaq4370-4 - adi,adaq4380-4 - adi,adaq4381-4 @@ -213,6 +215,15 @@ allOf: properties: refin-supply: false + # adi,ad7389-4 is internal reference only + - if: + properties: + compatible: + const: adi,ad7389-4 + then: + properties: + refio-supply: false + # adaq devices need more supplies and using channel to declare gain property # only applies to adaq devices - if: diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7405.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7405.yaml new file mode 100644 index 00000000000..57f09702570 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/adi,ad7405.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7405 family + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + - Pop Ioan Daniel <pop.ioan-daniel@analog.com> + +description: | + Analog Devices AD7405 is a high performance isolated ADC, 1-channel, + 16-bit with a second-order Σ-Δ modulator that converts an analog input signal + into a high speed, single-bit data stream. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf + +properties: + compatible: + enum: + - adi,ad7405 + - adi,adum7701 + - adi,adum7702 + - adi,adum7703 + + clocks: + maxItems: 1 + + vdd1-supply: true + + vdd2-supply: true + + io-backends: + maxItems: 1 + +required: + - compatible + - clocks + - vdd1-supply + - vdd2-supply + - io-backends + +additionalProperties: false + +examples: + - | + adc { + compatible = "adi,ad7405"; + clocks = <&axi_clk_gen 0>; + vdd1-supply = <&vdd1>; + vdd2-supply = <&vdd2>; + io-backends = <&axi_adc>; + }; +... diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7476.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7476.yaml index 44c671eeda7..d0cb32f136e 100644 --- a/dts/upstream/Bindings/iio/adc/adi,ad7476.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,ad7476.yaml @@ -17,35 +17,40 @@ description: | properties: compatible: - enum: - - adi,ad7091 - - adi,ad7091r - - adi,ad7273 - - adi,ad7274 - - adi,ad7276 - - adi,ad7277 - - adi,ad7278 - - adi,ad7466 - - adi,ad7467 - - adi,ad7468 - - adi,ad7475 - - adi,ad7476 - - adi,ad7476a - - adi,ad7477 - - adi,ad7477a - - adi,ad7478 - - adi,ad7478a - - adi,ad7495 - - adi,ad7910 - - adi,ad7920 - - adi,ad7940 - - ti,adc081s - - ti,adc101s - - ti,adc121s - - ti,ads7866 - - ti,ads7867 - - ti,ads7868 - - lltc,ltc2314-14 + oneOf: + - items: + - enum: + - adi,ad7091 + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7475 + - adi,ad7476 + - adi,ad7476a + - adi,ad7477 + - adi,ad7477a + - adi,ad7478 + - adi,ad7478a + - adi,ad7495 + - adi,ad7910 + - adi,ad7920 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7867 + - ti,ads7868 + - lltc,ltc2314-14 + - items: + - const: rohm,bu79100g + - const: ti,ads7866 reg: maxItems: 1 diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml index 52d3f1ce336..1180d2ffbf8 100644 --- a/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml @@ -45,6 +45,14 @@ properties: "#size-cells": const: 0 + '#trigger-source-cells': + description: | + Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA. + + For convenience, macros for these values are available in + dt-bindings/iio/adc/adi,ad7606.h. + const: 1 + # According to the datasheet, "Data is clocked in from SDI on the falling # edge of SCLK, while data is clocked out on DOUTA on the rising edge of # SCLK". Also, even if not stated textually in the datasheet, it is made @@ -196,6 +204,15 @@ patternProperties: considered a bipolar differential channel. Otherwise it is bipolar single-ended. + adi,rfilter-ohms: + description: + For ADCs that supports gain calibration, this property must be set to + the value of the external RFilter resistor. Proper gain error + correction is applied based on this value. + default: 0 + minimum: 0 + maximum: 64512 + required: - reg - bipolar @@ -215,12 +232,6 @@ allOf: - required: - pwms - - oneOf: - - required: - - interrupts - - required: - - io-backends - - if: properties: compatible: @@ -260,6 +271,25 @@ allOf: - adi,ad7607 - adi,ad7608 - adi,ad7609 + - adi,ad7616 + then: + patternProperties: + "^channel@[0-9a-f]+$": + properties: + adi,rfilter-ohms: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7606-4 + - adi,ad7606-6 + - adi,ad7606-8 + - adi,ad7607 + - adi,ad7608 + - adi,ad7609 then: properties: adi,sw-mode: false @@ -390,6 +420,7 @@ examples: reg = <8>; diff-channels = <8 8>; bipolar; + adi,rfilter-ohms = <2048>; }; }; diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7768-1.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7768-1.yaml index 3ce59d4d065..c06d0fc791d 100644 --- a/dts/upstream/Bindings/iio/adc/adi,ad7768-1.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,ad7768-1.yaml @@ -26,7 +26,26 @@ properties: clock-names: const: mclk + trigger-sources: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + description: | + A list of phandles referencing trigger source providers. Each entry + represents a trigger source for the ADC: + + - First entry specifies the device responsible for driving the + synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios. + This can be a `gpio-trigger` or another `ad7768-1` device. If the + device's own SYNC_OUT pin is internally connected to its SYNC_IN pin, + reference the device itself or omit this property. + - Second entry optionally defines a GPIO3 pin used as a START signal trigger. + + Use the accompanying trigger source cell to identify the type of each entry. + interrupts: + description: + DRDY (Data Ready) pin, which signals conversion results are available. maxItems: 1 '#address-cells': @@ -47,6 +66,19 @@ properties: in any way, for example if the filter decimation rate changes. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vcm-output: + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + reset-gpios: maxItems: 1 @@ -57,6 +89,23 @@ properties: "#io-channel-cells": const: 1 + "#trigger-source-cells": + description: | + Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3, + 2 = DRDY. + + For better readability, macros for these values are available in + dt-bindings/iio/adc/adi,ad7768-1.h. + const: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is for the GPIO number: 0 to 3. + The second cell takes standard GPIO flags. + required: - compatible - reg @@ -65,7 +114,16 @@ required: - vref-supply - spi-cpol - spi-cpha - - adi,sync-in-gpios + +dependencies: + adi,sync-in-gpios: + not: + required: + - trigger-sources + trigger-sources: + not: + required: + - adi,sync-in-gpios patternProperties: "^channel@([0-9]|1[0-5])$": @@ -105,6 +163,8 @@ examples: spi-max-frequency = <2000000>; spi-cpol; spi-cpha; + gpio-controller; + #gpio-cells = <2>; vref-supply = <&adc_vref>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; @@ -120,6 +180,12 @@ examples: reg = <0>; label = "channel_0"; }; + + regulators { + vcm_reg: vcm-output { + regulator-name = "ad7768-1-vcm"; + }; + }; }; }; ... diff --git a/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml b/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml index cf74f84d610..e91e421a3d6 100644 --- a/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml +++ b/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml @@ -27,6 +27,7 @@ description: | the ad7606 family. https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html @@ -34,6 +35,7 @@ properties: compatible: enum: - adi,axi-adc-10.0.a + - adi,axi-ad408x - adi,axi-ad7606x - adi,axi-ad485x diff --git a/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml b/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml index b0962a4583a..bb9825e7346 100644 --- a/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml +++ b/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml @@ -23,6 +23,7 @@ properties: - amlogic,meson8m2-saradc - amlogic,meson-gxbb-saradc - amlogic,meson-gxl-saradc + - amlogic,meson-gxlx-saradc - amlogic,meson-gxm-saradc - amlogic,meson-axg-saradc - amlogic,meson-g12a-saradc diff --git a/dts/upstream/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/dts/upstream/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 6168b44ea72..14363389f30 100644 --- a/dts/upstream/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/dts/upstream/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -34,6 +34,11 @@ properties: - const: mediatek,mt2701-auxadc - items: - enum: + - mediatek,mt7981-auxadc + - const: mediatek,mt7986-auxadc + - items: + - enum: + - mediatek,mt6893-auxadc - mediatek,mt8183-auxadc - mediatek,mt8186-auxadc - mediatek,mt8188-auxadc diff --git a/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml index 6497c416094..5d4ab701f51 100644 --- a/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml +++ b/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml @@ -22,6 +22,8 @@ properties: - mediatek,mt6357-auxadc - mediatek,mt6358-auxadc - mediatek,mt6359-auxadc + - mediatek,mt6363-auxadc + - mediatek,mt6373-auxadc "#io-channel-cells": const: 1 diff --git a/dts/upstream/Bindings/iio/adc/microchip,mcp3911.yaml b/dts/upstream/Bindings/iio/adc/microchip,mcp3911.yaml index 06951ec5f5d..3a69ec60edb 100644 --- a/dts/upstream/Bindings/iio/adc/microchip,mcp3911.yaml +++ b/dts/upstream/Bindings/iio/adc/microchip,mcp3911.yaml @@ -32,6 +32,9 @@ properties: spi-max-frequency: maximum: 20000000 + reset-gpios: + maxItems: 1 + clocks: description: | Phandle and clock identifier for external sampling clock. @@ -71,6 +74,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -80,6 +84,7 @@ examples: reg = <0>; interrupt-parent = <&gpio5>; interrupts = <15 2>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; spi-max-frequency = <20000000>; microchip,device-addr = <0>; vref-supply = <&vref_reg>; diff --git a/dts/upstream/Bindings/iio/adc/nuvoton,nct7201.yaml b/dts/upstream/Bindings/iio/adc/nuvoton,nct7201.yaml new file mode 100644 index 00000000000..8ce7d415d95 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/nuvoton,nct7201.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton nct7201 and similar ADCs + +maintainers: + - Eason Yang <j2anfernee@gmail.com> + +description: | + The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12 + voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus + address selection by ADDR connection. It also provides ALERT# signal for + event notification and reset input RSTIN# to recover it from a fault + condition. + + NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8). + NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12). + +properties: + compatible: + enum: + - nuvoton,nct7201 + - nuvoton,nct7202 + + reg: + maxItems: 1 + + vdd-supply: + description: + A 3.3V to supply that powers the chip. + + vref-supply: + description: + The regulator supply for the ADC reference voltage. + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@1d { + compatible = "nuvoton,nct7202"; + reg = <0x1d>; + vdd-supply = <&vdd>; + vref-supply = <&vref>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/dts/upstream/Bindings/iio/adc/nxp,lpc3220-adc.yaml b/dts/upstream/Bindings/iio/adc/nxp,lpc3220-adc.yaml index 2c5032be83b..fd815ab30df 100644 --- a/dts/upstream/Bindings/iio/adc/nxp,lpc3220-adc.yaml +++ b/dts/upstream/Bindings/iio/adc/nxp,lpc3220-adc.yaml @@ -22,6 +22,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + vref-supply: true "#io-channel-cells": diff --git a/dts/upstream/Bindings/iio/adc/qcom,spmi-rradc.yaml b/dts/upstream/Bindings/iio/adc/qcom,spmi-rradc.yaml index f39bc92c2b9..862e450da21 100644 --- a/dts/upstream/Bindings/iio/adc/qcom,spmi-rradc.yaml +++ b/dts/upstream/Bindings/iio/adc/qcom,spmi-rradc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm's SPMI PMIC Round Robin ADC maintainers: - - Caleb Connolly <caleb.connolly@linaro.org> + - Casey Connolly <casey.connolly@linaro.org> description: | The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to diff --git a/dts/upstream/Bindings/iio/adc/rohm,bd79104.yaml b/dts/upstream/Bindings/iio/adc/rohm,bd79104.yaml new file mode 100644 index 00000000000..2a8ad4fdfc6 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/rohm,bd79104.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rohm,bd79104.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM Semiconductor BD79104 ADC + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + 12 bit SPI ADC with 8 channels. + +properties: + compatible: + const: rohm,bd79104 + + reg: + maxItems: 1 + + vdd-supply: true + iovdd-supply: true + +# The component data-sheet says the frequency is 20M. I, however, found +# that the ROHM evaluation board BD79104FV-EVK-001 had problems with 20M. +# I have successfully used it with 4M. My _assumption_ is that this is not +# the limitation of the component itself, but a limitation of the EVK. + spi-max-frequency: + maximum: 20000000 + + "#io-channel-cells": + const: 1 + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - vdd-supply + - iovdd-supply + - spi-cpha + - spi-cpol + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "rohm,bd79104"; + reg = <0>; + vdd-supply = <&vdd_supply>; + iovdd-supply = <&iovdd_supply>; + spi-max-frequency = <4000000>; + spi-cpha; + spi-cpol; + #io-channel-cells = <1>; + }; + }; +... diff --git a/dts/upstream/Bindings/iio/adc/rohm,bd79124.yaml b/dts/upstream/Bindings/iio/adc/rohm,bd79124.yaml new file mode 100644 index 00000000000..50328582337 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/rohm,bd79124.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rohm,bd79124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD79124 ADC/GPO + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports + an automatic measurement mode, with an alarm interrupt for out-of-window + measurements. ADC input pins can be also configured as general purpose + outputs. + +properties: + compatible: + const: rohm,bd79124 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 1 + description: + The pin number. + + vdd-supply: true + + iovdd-supply: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-7]+$": + type: object + $ref: /schemas/iio/adc/adc.yaml# + description: Represents ADC channel. + + properties: + reg: + description: AIN pin number + minimum: 0 + maximum: 7 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - iovdd-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc: adc@10 { + compatible = "rohm,bd79124"; + reg = <0x10>; + + interrupt-parent = <&gpio1>; + interrupts = <29 8>; + + vdd-supply = <&dummyreg>; + iovdd-supply = <&dummyreg>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + }; + }; diff --git a/dts/upstream/Bindings/iio/adc/st,spear600-adc.yaml b/dts/upstream/Bindings/iio/adc/st,spear600-adc.yaml new file mode 100644 index 00000000000..dd9ec303870 --- /dev/null +++ b/dts/upstream/Bindings/iio/adc/st,spear600-adc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr ADC device driver + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Integrated ADC inside the ST SPEAr SoC, SPEAr600, supporting + 10-bit resolution. Datasheet can be found here: + https://www.st.com/resource/en/datasheet/spear600.pdf + +properties: + compatible: + enum: + - st,spear600-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + sampling-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2500000 + maximum: 20000000 + description: + Default sampling frequency of the ADC in Hz. + + vref-external: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000 + maximum: 2800 + description: + External voltage reference in milli-volts. If omitted the internal voltage + reference will be used. + + average-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: + Number of samples to generate an average value. If omitted, single data + conversion will be used. + +required: + - compatible + - reg + - interrupts + - sampling-frequency + +additionalProperties: false + +examples: + - | + adc@d8200000 { + compatible = "st,spear600-adc"; + reg = <0xd8200000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <6>; + sampling-frequency = <5000000>; + vref-external = <2500>; /* 2.5V VRef */ + }; diff --git a/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml b/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml index ef9dcc365ea..17bb60e18a1 100644 --- a/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml +++ b/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml @@ -498,7 +498,7 @@ patternProperties: examples: - | // Example 1: with stm32f429, ADC1, single-ended channel 8 - adc123: adc@40012000 { + adc123: adc@40012000 { compatible = "st,stm32f4-adc-core"; reg = <0x40012000 0x400>; interrupts = <18>; @@ -512,28 +512,28 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@0 { - compatible = "st,stm32f4-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - clocks = <&rcc 0 168>; - interrupt-parent = <&adc123>; - interrupts = <0>; - st,adc-channels = <8>; - dmas = <&dma2 0 0 0x400 0x0>; - dma-names = "rx"; - assigned-resolution-bits = <8>; + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc123>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; }; // ... // other adc child nodes follow... - }; + }; - | // Example 2: with stm32mp157c to setup ADC1 with: // - channels 0 & 1 as single-ended // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - adc12: adc@48003000 { + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc12: adc@48003000 { compatible = "st,stm32mp1-adc-core"; reg = <0x48003000 0x400>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -550,27 +550,27 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@0 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - interrupt-parent = <&adc12>; - interrupts = <0>; - st,adc-channels = <0 1>; - st,adc-diff-channels = <2 6>, <3 7>; - st,min-sample-time-nsecs = <5000>; - dmas = <&dmamux1 9 0x400 0x05>; - dma-names = "rx"; + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc12>; + interrupts = <0>; + st,adc-channels = <0 1>; + st,adc-diff-channels = <2 6>, <3 7>; + st,min-sample-time-nsecs = <5000>; + dmas = <&dmamux1 9 0x400 0x05>; + dma-names = "rx"; }; // ... // other adc child node follow... - }; + }; - | // Example 3: with stm32mp157c to setup ADC2 with: // - internal channels 13, 14, 15. - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - adc122: adc@48003000 { + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc122: adc@48003000 { compatible = "st,stm32mp1-adc-core"; reg = <0x48003000 0x400>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -587,28 +587,28 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@100 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - reg = <0x100>; - interrupts = <1>; - #address-cells = <1>; - #size-cells = <0>; - channel@13 { - reg = <13>; - label = "vrefint"; - st,min-sample-time-ns = <9000>; - }; - channel@14 { - reg = <14>; - label = "vddcore"; - st,min-sample-time-ns = <9000>; - }; - channel@15 { - reg = <15>; - label = "vbat"; - st,min-sample-time-ns = <9000>; - }; + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + channel@13 { + reg = <13>; + label = "vrefint"; + st,min-sample-time-ns = <9000>; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + st,min-sample-time-ns = <9000>; + }; + channel@15 { + reg = <15>; + label = "vbat"; + st,min-sample-time-ns = <9000>; + }; }; - }; + }; ... |