diff options
Diffstat (limited to 'dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts')
| -rw-r--r-- | dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts | 191 |
1 files changed, 100 insertions, 91 deletions
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts index 82835e96317..c151984289b 100644 --- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts +++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-catalina.dts @@ -50,14 +50,14 @@ i2c45 = &i2c0mux5ch1; i2c46 = &i2c0mux5ch2; i2c47 = &i2c0mux5ch3; - i2c48 = &i2c30mux0ch0; - i2c49 = &i2c30mux0ch1; - i2c50 = &i2c30mux0ch2; - i2c51 = &i2c30mux0ch3; - i2c52 = &i2c30mux0ch4; - i2c53 = &i2c30mux0ch5; - i2c54 = &i2c30mux0ch6; - i2c55 = &i2c30mux0ch7; + i2c48 = &i2c5mux0ch0; + i2c49 = &i2c5mux0ch1; + i2c50 = &i2c5mux0ch2; + i2c51 = &i2c5mux0ch3; + i2c52 = &i2c5mux0ch4; + i2c53 = &i2c5mux0ch5; + i2c54 = &i2c5mux0ch6; + i2c55 = &i2c5mux0ch7; }; chosen { @@ -153,6 +153,13 @@ status = "okay"; }; +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; +}; + &mac3 { status = "okay"; pinctrl-names = "default"; @@ -185,6 +192,7 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux0ch0: i2c@0 { #address-cells = <1>; @@ -213,6 +221,7 @@ reg = <0x72>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux1ch0: i2c@0 { #address-cells = <1>; @@ -242,79 +251,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - i2c-mux@70 { - compatible = "nxp,pca9548"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c30mux0ch0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2c30mux0ch1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - i2c30mux0ch2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - i2c30mux0ch3: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - i2c30mux0ch4: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - i2c30mux0ch5: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - i2c30mux0ch6: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - // HDD FRU EEPROM - eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - }; - }; - i2c30mux0ch7: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - - power-sensor@40 { - compatible = "ti,ina230"; - reg = <0x40>; - shunt-resistor = <2000>; - }; - power-sensor@41 { - compatible = "ti,ina230"; - reg = <0x41>; - shunt-resistor = <2000>; - }; - power-sensor@44 { - compatible = "ti,ina230"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - power-sensor@45 { - compatible = "ti,ina230"; - reg = <0x45>; - shunt-resistor = <2000>; - }; - }; - }; }; i2c0mux1ch3: i2c@3 { #address-cells = <1>; @@ -328,6 +264,7 @@ reg = <0x73>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux2ch0: i2c@0 { #address-cells = <1>; @@ -356,6 +293,7 @@ reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux3ch0: i2c@0 { #address-cells = <1>; @@ -384,6 +322,7 @@ reg = <0x76>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux4ch0: i2c@0 { #address-cells = <1>; @@ -426,6 +365,7 @@ reg = <0x77>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c0mux5ch0: i2c@0 { #address-cells = <1>; @@ -512,12 +452,12 @@ power-monitor@42 { compatible = "lltc,ltc4287"; reg = <0x42>; - shunt-resistor-micro-ohms = <200>; + shunt-resistor-micro-ohms = <100>; }; power-monitor@43 { compatible = "lltc,ltc4287"; reg = <0x43>; - shunt-resistor-micro-ohms = <200>; + shunt-resistor-micro-ohms = <100>; }; }; i2c1mux0ch5: i2c@5 { @@ -593,8 +533,6 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; }; // Module 1 IOEXP @@ -603,8 +541,6 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; }; // HMC IOEXP @@ -613,8 +549,6 @@ reg = <0x27>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; }; // Module 0 EEPROM @@ -640,6 +574,81 @@ &i2c5 { status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c5mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c5mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c5mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + i2c5mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c5mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c5mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + // HDD FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + i2c5mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + }; }; &i2c6 { @@ -834,9 +843,9 @@ }; // OCP NIC1 FRU EEPROM - eeprom@50 { + eeprom@52 { compatible = "atmel,24c64"; - reg = <0x50>; + reg = <0x52>; }; }; |