diff options
Diffstat (limited to 'include/configs/MPC8548CDS.h')
| -rw-r--r-- | include/configs/MPC8548CDS.h | 109 |
1 files changed, 46 insertions, 63 deletions
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index b241939fc38..780ee5ae865 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -13,11 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ - #ifndef __ASSEMBLY__ #include <linux/stringify.h> #endif @@ -31,16 +26,15 @@ * Only possible on E500 Version 2 or newer cores. */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0xe0000000 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ @@ -115,32 +109,30 @@ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ +#define CFG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfff000000ull +#define CFG_SYS_FLASH_BASE_PHYS 0xfff000000ull #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_FLASH_BANKS_LIST \ - {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} - -#define CONFIG_HWCONFIG /* enable hwconfig */ +#define CFG_SYS_FLASH_BANKS_LIST \ + {CFG_SYS_FLASH_BASE_PHYS + 0x800000, CFG_SYS_FLASH_BASE_PHYS} /* * SDRAM on the Local Bus */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull +#define CFG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull #else -#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_BASE +#define CFG_SYS_LBC_SDRAM_BASE_PHYS CFG_SYS_LBC_SDRAM_BASE #endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ +#define CFG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. + * The SDRAM base address, CFG_SYS_LBC_SDRAM_BASE, is 0xf0000000. * * For BR2, need: * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 @@ -152,12 +144,12 @@ * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into + * FIXME: CFG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ /* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. + * The SDRAM size in MB, CFG_SYS_LBC_SDRAM_SIZE, is 64. * * For OR2, need: * 64MB mask for AM, OR2[0:7] = 1111 1100 @@ -170,10 +162,10 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ +#define CFG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ +#define CFG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ /* * Common settings for all Local Bus SDRAM commands. @@ -181,7 +173,7 @@ * or BSMA1617 (for CPU 1.0) (old) * is OR'ed in too. */ -#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ +#define CFG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ | LSDMR_PRETOACT7 \ | LSDMR_ACTTORW7 \ | LSDMR_BL8 \ @@ -220,8 +212,6 @@ * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 */ -#define CONFIG_FSL_CADMUS - #define CADMUS_BASE_ADDR 0xf8000000 #ifdef CONFIG_PHYS_64BIT #define CADMUS_BASE_ADDR_PHYS 0xff8000000ull @@ -229,76 +219,69 @@ #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR #endif -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#define CFG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600) /* * I2C */ #if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } +#define CFG_SYS_I2C_NOPROBES { {0, 0x69} } #endif /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ -#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 +#define CFG_SYS_PCI1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull +#define CFG_SYS_PCI1_MEM_PHYS 0xc00000000ull #else -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 +#define CFG_SYS_PCI1_MEM_PHYS 0x80000000 #endif -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 +#define CFG_SYS_PCI1_IO_VIRT 0xe2000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull +#define CFG_SYS_PCI1_IO_PHYS 0xfe2000000ull #else -#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 +#define CFG_SYS_PCI1_IO_PHYS 0xe2000000 #endif -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ #ifdef CONFIG_PCIE1 -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 +#define CFG_SYS_PCIE1_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc20000000ull +#define CFG_SYS_PCIE1_MEM_PHYS 0xc20000000ull #else -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 +#define CFG_SYS_PCIE1_MEM_PHYS 0xa0000000 #endif -#define CONFIG_SYS_PCIE1_IO_VIRT 0xe3000000 +#define CFG_SYS_PCIE1_IO_VIRT 0xe3000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfe3000000ull +#define CFG_SYS_PCIE1_IO_PHYS 0xfe3000000ull #else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 +#define CFG_SYS_PCIE1_IO_PHYS 0xe3000000 #endif #endif /* * RapidIO MMU */ -#define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 +#define CFG_SYS_SRIO1_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc40000000ull +#define CFG_SYS_SRIO1_MEM_PHYS 0xc40000000ull #else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc0000000 +#define CFG_SYS_SRIO1_MEM_PHYS 0xc0000000 #endif -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ #if defined(CONFIG_TSEC_ENET) @@ -336,7 +319,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ /* * Environment Configuration |