diff options
Diffstat (limited to 'include/configs/T104xRDB.h')
| -rw-r--r-- | include/configs/T104xRDB.h | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 9433f14227b..57a787565b9 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -70,9 +70,6 @@ /* High Level Configuration Options */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -/* support deep sleep */ -#define CONFIG_DEEP_SLEEP - #ifndef CONFIG_RESET_VECTOR_ADDRESS #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif @@ -96,9 +93,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -133,7 +128,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 @@ -302,22 +296,10 @@ #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_A008044 -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_A008044_WORKAROUND -#endif -#endif - #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ @@ -354,19 +336,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB) -/* Video */ -#define CONFIG_FSL_DIU_FB - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_FSL_DIU_CH7301 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_BMP_LOGO -#endif -#endif - -/* I2C */ - /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 @@ -523,8 +492,6 @@ #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c #endif #endif - -#define CONFIG_ETHPRIME "FM1@DTSEC4" #endif /* @@ -553,7 +520,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define __USB_PHY_TYPE utmi @@ -571,18 +537,11 @@ #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif -#ifdef CONFIG_FSL_DIU_FB -#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" -#else -#define DIU_ENVIRONMENT -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ |