diff options
Diffstat (limited to 'include/configs/ls1012ardb.h')
| -rw-r--r-- | include/configs/ls1012ardb.h | 66 |
1 files changed, 58 insertions, 8 deletions
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 89aa952dc61..ab139b00dd7 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -24,14 +24,21 @@ * I2C IO expander */ -#define I2C_MUX_IO1_ADDR 0x24 -#define __SW_BOOT_MASK 0xFC -#define __SW_BOOT_EMU 0x10 -#define __SW_BOOT_BANK1 0x00 -#define __SW_BOOT_BANK2 0x01 -#define __SW_REV_MASK 0x07 -#define __SW_REV_A 0xF8 -#define __SW_REV_B 0xF0 +#define I2C_MUX_IO_ADDR 0x24 +#define I2C_MUX_IO_0 0 +#define I2C_MUX_IO_1 1 +#define SW_BOOT_MASK 0x03 +#define SW_BOOT_EMU 0x02 +#define SW_BOOT_BANK1 0x00 +#define SW_BOOT_BANK2 0x01 +#define SW_REV_MASK 0xF8 +#define SW_REV_A 0xF8 +#define SW_REV_B 0xF0 +#define SW_REV_C 0xE8 +#define SW_REV_C1 0xE0 +#define SW_REV_C2 0xD8 +#define SW_REV_D 0xD0 +#define SW_REV_E 0xC8 /* MMC */ #ifdef CONFIG_MMC @@ -58,6 +65,49 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012ardb_boot.scr\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "installer=load mmc 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "bootm $load_addr#$board\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size && bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" #include <asm/fsl_secure_boot.h> |