diff options
Diffstat (limited to 'include/dt-bindings/usb/pd.h')
| -rw-r--r-- | include/dt-bindings/usb/pd.h | 468 |
1 files changed, 0 insertions, 468 deletions
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h deleted file mode 100644 index e6526b13817..00000000000 --- a/include/dt-bindings/usb/pd.h +++ /dev/null @@ -1,468 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_POWER_DELIVERY_H -#define __DT_POWER_DELIVERY_H - -/* Power delivery Power Data Object definitions */ -#define PDO_TYPE_FIXED 0 -#define PDO_TYPE_BATT 1 -#define PDO_TYPE_VAR 2 -#define PDO_TYPE_APDO 3 - -#define PDO_TYPE_SHIFT 30 -#define PDO_TYPE_MASK 0x3 - -#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) - -#define PDO_VOLT_MASK 0x3ff -#define PDO_CURR_MASK 0x3ff -#define PDO_PWR_MASK 0x3ff - -#define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */ -#define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */ -#define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */ -#define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */ -#define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */ -#define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */ -#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ -#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ - -#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) -#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) - -#define PDO_FIXED(mv, ma, flags) \ - (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ - PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) - -#define VSAFE5V 5000 /* mv units */ - -#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ -#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ -#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ - -#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) -#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) -#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) - -#define PDO_BATT(min_mv, max_mv, max_mw) \ - (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ - PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) - -#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ -#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ -#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ - -#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) -#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) -#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) - -#define PDO_VAR(min_mv, max_mv, max_ma) \ - (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ - PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) - -#define APDO_TYPE_PPS 0 - -#define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */ -#define PDO_APDO_TYPE_MASK 0x3 - -#define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT) - -#define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */ -#define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */ -#define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */ - -#define PDO_PPS_APDO_VOLT_MASK 0xff -#define PDO_PPS_APDO_CURR_MASK 0x7f - -#define PDO_PPS_APDO_MIN_VOLT(mv) \ - ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT) -#define PDO_PPS_APDO_MAX_VOLT(mv) \ - ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT) -#define PDO_PPS_APDO_MAX_CURR(ma) \ - ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT) - -#define PDO_PPS_APDO(min_mv, max_mv, max_ma) \ - (PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) | \ - PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) | \ - PDO_PPS_APDO_MAX_CURR(max_ma)) - - /* - * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0, - * Version 1.2" - * Initial current capability of the new source when vSafe5V is applied. - */ -#define FRS_DEFAULT_POWER 1 -#define FRS_5V_1P5A 2 -#define FRS_5V_3A 3 - -/* - * SVDM Identity Header - * -------------------- - * <31> :: data capable as a USB host - * <30> :: data capable as a USB device - * <29:27> :: product type (UFP / Cable / VPD) - * <26> :: modal operation supported (1b == yes) - * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0) - * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0) - * <20:16> :: Reserved, Shall be set to zero - * <15:0> :: USB-IF assigned VID for this cable vendor - */ - -/* PD Rev2.0 definition */ -#define IDH_PTYPE_UNDEF 0 - -/* SOP Product Type (UFP) */ -#define IDH_PTYPE_NOT_UFP 0 -#define IDH_PTYPE_HUB 1 -#define IDH_PTYPE_PERIPH 2 -#define IDH_PTYPE_PSD 3 -#define IDH_PTYPE_AMA 5 - -/* SOP' Product Type (Cable Plug / VPD) */ -#define IDH_PTYPE_NOT_CABLE 0 -#define IDH_PTYPE_PCABLE 3 -#define IDH_PTYPE_ACABLE 4 -#define IDH_PTYPE_VPD 6 - -/* SOP Product Type (DFP) */ -#define IDH_PTYPE_NOT_DFP 0 -#define IDH_PTYPE_DFP_HUB 1 -#define IDH_PTYPE_DFP_HOST 2 -#define IDH_PTYPE_DFP_PB 3 - -#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ - ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \ - | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21 \ - | ((vid) & 0xffff)) - -/* - * Cert Stat VDO - * ------------- - * <31:0> : USB-IF assigned XID for this cable - */ -#define VDO_CERT(xid) ((xid) & 0xffffffff) - -/* - * Product VDO - * ----------- - * <31:16> : USB Product ID - * <15:0> : USB bcdDevice - */ -#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff)) - -/* - * UFP VDO (PD Revision 3.0+ only) - * -------- - * <31:29> :: UFP VDO version - * <28> :: Reserved - * <27:24> :: Device capability - * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) - * <21:11> :: Reserved - * <10:8> :: Vconn power (AMA only) - * <7> :: Vconn required (AMA only, 0b == no, 1b == yes) - * <6> :: Vbus required (AMA only, 0b == yes, 1b == no) - * <5:3> :: Alternate modes - * <2:0> :: USB highest speed - */ -/* UFP VDO Version */ -#define UFP_VDO_VER1_2 2 - -/* Device Capability */ -#define DEV_USB2_CAPABLE (1 << 0) -#define DEV_USB2_BILLBOARD (1 << 1) -#define DEV_USB3_CAPABLE (1 << 2) -#define DEV_USB4_CAPABLE (1 << 3) - -/* Connector Type */ -#define UFP_RECEPTACLE 2 -#define UFP_CAPTIVE 3 - -/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */ -#define AMA_VCONN_PWR_1W 0 -#define AMA_VCONN_PWR_1W5 1 -#define AMA_VCONN_PWR_2W 2 -#define AMA_VCONN_PWR_3W 3 -#define AMA_VCONN_PWR_4W 4 -#define AMA_VCONN_PWR_5W 5 -#define AMA_VCONN_PWR_6W 6 - -/* Vconn Required (AMA only) */ -#define AMA_VCONN_NOT_REQ 0 -#define AMA_VCONN_REQ 1 - -/* Vbus Required (AMA only) */ -#define AMA_VBUS_REQ 0 -#define AMA_VBUS_NOT_REQ 1 - -/* Alternate Modes */ -#define UFP_ALTMODE_NOT_SUPP 0 -#define UFP_ALTMODE_TBT3 (1 << 0) -#define UFP_ALTMODE_RECFG (1 << 1) -#define UFP_ALTMODE_NO_RECFG (1 << 2) - -/* USB Highest Speed */ -#define UFP_USB2_ONLY 0 -#define UFP_USB32_GEN1 1 -#define UFP_USB32_4_GEN2 2 -#define UFP_USB4_GEN3 3 - -#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \ - (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22 \ - | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \ - | ((spd) & 0x7)) - -/* - * DFP VDO (PD Revision 3.0+ only) - * -------- - * <31:29> :: DFP VDO version - * <28:27> :: Reserved - * <26:24> :: Host capability - * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) - * <21:5> :: Reserved - * <4:0> :: Port number - */ -#define DFP_VDO_VER1_1 1 -#define HOST_USB2_CAPABLE (1 << 0) -#define HOST_USB3_CAPABLE (1 << 1) -#define HOST_USB4_CAPABLE (1 << 2) -#define DFP_RECEPTACLE 2 -#define DFP_CAPTIVE 3 - -#define VDO_DFP(ver, cap, conn, pnum) \ - (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22 \ - | ((pnum) & 0x1f)) - -/* - * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0) - * --------- - * <31:28> :: Cable HW version - * <27:24> :: Cable FW version - * <23:20> :: Reserved, Shall be set to zero - * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) - * <17> :: Reserved, Shall be set to zero - * <16:13> :: cable latency (0001 == <10ns(~1m length)) - * <12:11> :: cable termination type (11b == both ends active VCONN req) - * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) - * <9> :: SSTX2 Directionality support - * <8> :: SSRX1 Directionality support - * <7> :: SSRX2 Directionality support - * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) - * <4> :: Vbus through cable (0b == no, 1b == yes) - * <3> :: SOP" controller present? (0b == no, 1b == yes) - * <2:0> :: USB SS Signaling support - * - * Passive Cable VDO (PD Rev3.0+) - * --------- - * <31:28> :: Cable HW version - * <27:24> :: Cable FW version - * <23:21> :: VDO version - * <20> :: Reserved, Shall be set to zero - * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive) - * <17> :: Reserved, Shall be set to zero - * <16:13> :: cable latency (0001 == <10ns(~1m length)) - * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req) - * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) - * <8:7> :: Reserved, Shall be set to zero - * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) - * <4:3> :: Reserved, Shall be set to zero - * <2:0> :: USB highest speed - * - * Active Cable VDO 1 (PD Rev3.0+) - * --------- - * <31:28> :: Cable HW version - * <27:24> :: Cable FW version - * <23:21> :: VDO version - * <20> :: Reserved, Shall be set to zero - * <19:18> :: Connector type (10b == C, 11b == Captive) - * <17> :: Reserved, Shall be set to zero - * <16:13> :: cable latency (0001 == <10ns(~1m length)) - * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req) - * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) - * <8> :: SBU supported (0b == supported, 1b == not supported) - * <7> :: SBU type (0b == passive, 1b == active) - * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) - * <4> :: Vbus through cable (0b == no, 1b == yes) - * <3> :: SOP" controller present? (0b == no, 1b == yes) - * <2:0> :: USB highest speed - */ -/* Cable VDO Version */ -#define CABLE_VDO_VER1_0 0 -#define CABLE_VDO_VER1_3 3 - -/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */ -#define CABLE_ATYPE 0 -#define CABLE_BTYPE 1 -#define CABLE_CTYPE 2 -#define CABLE_CAPTIVE 3 - -/* Cable Latency */ -#define CABLE_LATENCY_1M 1 -#define CABLE_LATENCY_2M 2 -#define CABLE_LATENCY_3M 3 -#define CABLE_LATENCY_4M 4 -#define CABLE_LATENCY_5M 5 -#define CABLE_LATENCY_6M 6 -#define CABLE_LATENCY_7M 7 -#define CABLE_LATENCY_7M_PLUS 8 - -/* Cable Termination Type */ -#define PCABLE_VCONN_NOT_REQ 0 -#define PCABLE_VCONN_REQ 1 -#define ACABLE_ONE_END 2 -#define ACABLE_BOTH_END 3 - -/* Maximum Vbus Voltage */ -#define CABLE_MAX_VBUS_20V 0 -#define CABLE_MAX_VBUS_30V 1 -#define CABLE_MAX_VBUS_40V 2 -#define CABLE_MAX_VBUS_50V 3 - -/* Active Cable SBU Supported/Type */ -#define ACABLE_SBU_SUPP 0 -#define ACABLE_SBU_NOT_SUPP 1 -#define ACABLE_SBU_PASSIVE 0 -#define ACABLE_SBU_ACTIVE 1 - -/* Vbus Current Handling Capability */ -#define CABLE_CURR_DEF 0 -#define CABLE_CURR_3A 1 -#define CABLE_CURR_5A 2 - -/* USB SuperSpeed Signaling Support (PD Rev2.0) */ -#define CABLE_USBSS_U2_ONLY 0 -#define CABLE_USBSS_U31_GEN1 1 -#define CABLE_USBSS_U31_GEN2 2 - -/* USB Highest Speed */ -#define CABLE_USB2_ONLY 0 -#define CABLE_USB32_GEN1 1 -#define CABLE_USB32_4_GEN2 2 -#define CABLE_USB4_GEN3 3 - -#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \ - (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ - | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \ - | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \ - | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7)) -#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ - (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ - | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ - | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7)) -#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \ - (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ - | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ - | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ - | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) - -/* - * Active Cable VDO 2 - * --------- - * <31:24> :: Maximum operating temperature - * <23:16> :: Shutdown temperature - * <15> :: Reserved, Shall be set to zero - * <14:12> :: U3/CLd power - * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S) - * <10> :: Physical connection (0b == copper, 1b == optical) - * <9> :: Active element (0b == redriver, 1b == retimer) - * <8> :: USB4 supported (0b == yes, 1b == no) - * <7:6> :: USB2 hub hops consumed - * <5> :: USB2 supported (0b == yes, 1b == no) - * <4> :: USB3.2 supported (0b == yes, 1b == no) - * <3> :: USB lanes supported (0b == one lane, 1b == two lanes) - * <2> :: Optically isolated active cable (0b == no, 1b == yes) - * <1> :: Reserved, Shall be set to zero - * <0> :: USB gen (0b == gen1, 1b == gen2+) - */ -/* U3/CLd Power*/ -#define ACAB2_U3_CLD_10MW_PLUS 0 -#define ACAB2_U3_CLD_10MW 1 -#define ACAB2_U3_CLD_5MW 2 -#define ACAB2_U3_CLD_1MW 3 -#define ACAB2_U3_CLD_500UW 4 -#define ACAB2_U3_CLD_200UW 5 -#define ACAB2_U3_CLD_50UW 6 - -/* Other Active Cable VDO 2 Fields */ -#define ACAB2_U3U0_DIRECT 0 -#define ACAB2_U3U0_U3S 1 -#define ACAB2_PHY_COPPER 0 -#define ACAB2_PHY_OPTICAL 1 -#define ACAB2_REDRIVER 0 -#define ACAB2_RETIMER 1 -#define ACAB2_USB4_SUPP 0 -#define ACAB2_USB4_NOT_SUPP 1 -#define ACAB2_USB2_SUPP 0 -#define ACAB2_USB2_NOT_SUPP 1 -#define ACAB2_USB32_SUPP 0 -#define ACAB2_USB32_NOT_SUPP 1 -#define ACAB2_LANES_ONE 0 -#define ACAB2_LANES_TWO 1 -#define ACAB2_OPT_ISO_NO 0 -#define ACAB2_OPT_ISO_YES 1 -#define ACAB2_GEN_1 0 -#define ACAB2_GEN_2_PLUS 1 - -#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \ - (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12 \ - | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \ - | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \ - | (iso) << 2 | (gen)) - -/* - * AMA VDO (PD Rev2.0) - * --------- - * <31:28> :: Cable HW version - * <27:24> :: Cable FW version - * <23:12> :: Reserved, Shall be set to zero - * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) - * <10> :: SSTX2 Directionality support - * <9> :: SSRX1 Directionality support - * <8> :: SSRX2 Directionality support - * <7:5> :: Vconn power - * <4> :: Vconn power required - * <3> :: Vbus power required - * <2:0> :: USB SS Signaling support - */ -#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ - (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ - | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ - | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ - | ((usbss) & 0x7)) - -#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) -#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) - -#define AMA_USBSS_U2_ONLY 0 -#define AMA_USBSS_U31_GEN1 1 -#define AMA_USBSS_U31_GEN2 2 -#define AMA_USBSS_BBONLY 3 - -/* - * VPD VDO - * --------- - * <31:28> :: HW version - * <27:24> :: FW version - * <23:21> :: VDO version - * <20:17> :: Reserved, Shall be set to zero - * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) - * <14> :: Charge through current support (0b == 3A, 1b == 5A) - * <13> :: Reserved, Shall be set to zero - * <12:7> :: Vbus impedance - * <6:1> :: Ground impedance - * <0> :: Charge through support (0b == no, 1b == yes) - */ -#define VPD_VDO_VER1_0 0 -#define VPD_MAX_VBUS_20V 0 -#define VPD_MAX_VBUS_30V 1 -#define VPD_MAX_VBUS_40V 2 -#define VPD_MAX_VBUS_50V 3 -#define VPDCT_CURR_3A 0 -#define VPDCT_CURR_5A 1 -#define VPDCT_NOT_SUPP 0 -#define VPDCT_SUPP 1 - -#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \ - (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ - | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \ - | ((gi) & 0x3f) << 1 | (ct)) - -#endif /* __DT_POWER_DELIVERY_H */ |