| Age | Commit message (Collapse) | Author |
|---|
|
ut_check_console_line() does include an assert.
Pass the result to ut_assertok().
Addresses-Coverity-ID: 514958 Error handling issues
Fixes: 7dfafcd65ef3 ("test: unit test for hash command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Some Kconfig symbols introduced in commit 8cb330355bd5 ("net: introduce
alternative implementation as net/lwip/") need a full description. The
NET symbol needs one, too.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The maximum length of a domain name is 253 as defined in RFC 1035.
So SERVER_NAME_SIZE should be 254 including NUL.
Fixes: 3c656c928bd7 ("net: lwip: add wget command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Nam Cao <namcao@linutronix.de> says:
We observed the following sporadic boot failure while booting from MMC
device:
=> boot
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
** Booting bootflow 'mmc@2194000.bootdev.part_1' with extlinux
Ignoring unknown command: �D���D��
Boot failed (err=-14)
The reason is because while allocating buffer to read a file from MMC,
alignment of 1 byte is used. Thus, the buffer doesn't work for performing
DMA, and garbage data is read.
While looking at this issue, I also noticed that if no alignment specified
(align=0) then fs_read_alloc() is documented to use the default. But the
default is no alignment. Therefore, other users of fs_read_alloc() which
specify align=0 may be broken as well.
The first patch changes extlinux_read_bootflow() to use proper buffer
alignment for DMA.
The second patch changes the default alignment of fs_read_alloc() to be
DMA-suitable, to fix other potential bugs.
|
|
The comment above fs_read_alloc() explains:
@align: Alignment to use for memory allocation (0 for default)
However, in the actual implementation, there is no alignment when @align is
zero.
This current default is probably fine for most cases. But for some block
devices which transfer data via DMA, ARCH_DMA_MINALIGN is needed.
Change the default alignment to ARCH_DMA_MINALIGN.
Fixes: de7b5a8a1ac0 ("fs: Create functions to load and allocate a file")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
|
|
extlinux_read_bootflow() allocates a buffer to read from file system
without any alignment.
But for some block devices which transfer data via DMA, ARCH_DMA_MINALIGN
alignment is required. For example, due to misaligned buffer, the below
boot failure is observed.
=> boot
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
** Booting bootflow 'mmc@2194000.bootdev.part_1' with extlinux
Ignoring unknown command: �D���D��
Boot failed (err=-14)
Change the buffer alignment to ARCH_DMA_MINALIGN.
Fixes: 31aefaf89a5b ("bootstd: Add an implementation of distro boot")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/23393
- Two changes from Heinrich:
- One is adding some missing TPM files for proper maintenance.
- The second addresses Coverity-ID: 356664 replacing a mempcy() which
has undefined behavior with memmove()
|
|
All TPM code should be maintained.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The behavior of memcpy() for overlapping buffers is undefined.
Fixes: 4c57ec76b725 ("tpm: Implement state command for Cr50")
Addresses-Coverity-ID: 356664 Overlapping buffer in memory copy
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We don't use this feature, we can remove it therefore in the defconfigs.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
|
|
Running commands such as 'load mmc 2:1 $addr $path' when path does not
exists will print an error twice if the file does not exist, e.g.:
```
Cannot lookup file boot/boot.scr
Failed to load 'boot/boot.scr'
```
(where the first line is printed by btrfs and the second by common fs
code)
Historically other filesystems such as ext4 or fat have not been
printing a message here, so do the same here to avoid duplicate.
The other error messages in this function are also somewhat redundant,
but bring useful diagnostics if they happen somewhere, so have been left
as printf.
Note that if a user wants no message to be printed for optional file
loads, they have to check for file existence first with other commands
such as 'size'.
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
|
|
Rephrasing the error and warning messages to be more meaningful and
clear.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23373
- Fix a missing break for CMD_DCD_SKIP reported by Coverty on imx8image.
- Fix i.MX thermal threshold regression.
|
|
Fix the critical thermal threshold for i.MX processors, this was changed
while moving the code from imx8m/imx9 directories into a shared place.
There is no need to keep the critical threshold 5 degrees less than the
SoC maximum temperature threshold, what is actually going to happen in
practice is that we are going to power-off the board when the SoC is
still within its working temperature range.
In addition to that this is a change in the actual behavior, that is
introducing a regression to users, and it was hidden within a software
refactoring.
Fixes: d0fe80890ab1 ("imx: Generalize fixup_thermal_trips")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
The CMD_DCD_SKIP case misses a break statement.
Add it.
Fixes: 254c00803b63 ("tools: imx8image: add possibility to skip dcd")
Addresses-Coverity-ID: 514648: Control flow issues (MISSING_BREAK)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
|
|
Add test overlay .S and u_boot_logo file to gitignore as these files are
generated and should not be committed but ignored.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
In the message string " %s[%d]\t[0x%llx-0x%llx], 0x%08llx bytes flags: "
a comma is missing before flags.
To avoid increasing the code size replace '0x%' by '%#'.
Printing the size with leading zeros but not the addresses does not really
make sense. Remove the leading zeros from the size output.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
[trini: Fix test/cmd/bdinfo.c for these changes]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
For printing size_t we must use %zd and not %ld to avoid
a -Wformat error on 32-bit systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Availability of %ls in printf() depends on having
CONFIG_EFI_LOADER or CONFIG_EFI_APP.
Respect this when testing.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We want to completely initialize the mbr and embr buffers. This requires
passing the buffer size and not the size of a pointer to the buffer.
Addresses-Coverity-ID: 510454 Wrong sizeof argument
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
When calling decode_addr_size() we must pass the size of the device-tree
property and not sizeof(void *).
Fixes: 90469da3da0d ("upl: Add support for reading a upl handoff")
Addresses-Coverity-ID: 510459 Wrong sizeof argument
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
do_upl_write() calls upl_get_test_data() which may increment the fail
count in the unit test state. We should initialize it.
Addresses-Coverity-ID: 510465 Uninitialized scalar variable
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Falltroughs in switch statements should be explicit.
Addresses-Coverity-ID: 131162 Missing break in switch
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Commit c3cf0dc64f1c ("lmb: add a check to prevent memory overrun")
addressed a possible buffer overrun using assert_noisy().
Resetting via panic() in lmb_print_region() while allowing invalid
lmb flags elsewhere is not reasonable.
Instead of panicking print a message indicating the problem.
fls() returns an int. Using a u64 for bitpos does not match.
Use int instead.
fls() takes an int as argument. Using 1ull << bitpos generates a u64.
Use 1u << bitpos instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
|
|
RFC 3447 says that Typical salt length are either 0 or the length
of the output of the digest algorithm, RFC 4055 also recommends
hash value length as the salt length. Moreover, By convention,
most of the signing infrastructures/libraries use the length of
the digest algorithm (such as google cloud kms:
https://cloud.google.com/kms/docs/algorithms).
If the salt-length parameter is not set, openssl default to the
maximum allowed value, which is a openssl 'specificity', so this
works well for local signing, but restricts compatibility with
other engines (e.g pkcs11/libkmsp11):
```
returning 0x71 from C_SignInit due to status INVALID_ARGUMENT:
at rsassa_pss.cc:53: expected salt length for key XX is 32,
but 478 was supplied in the parameters
Could not obtain signature: error:41000070:PKCS#11 module::Mechanism invalid
```
To improve compatibility, we set the default RSA-PSS salt-length
value to the conventional one. A further improvement could consist
in making it configurable as signature FIT node attribute.
rfc3447: https://datatracker.ietf.org/doc/html/rfc3447
rfc4055: https://datatracker.ietf.org/doc/html/rfc4055
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
|
|
Fix various code style issues in the lwIP code.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
One can use ccache by prefixing the typical CROSS_COMPILE value with
"ccache " (e.g. "ccache aarch64-gnu-linux-" for Aarch64). This however
makes the MK_ARCH empty because sed won't find a match anymore since it
expects the CROSS_COMPILE value to start with the actual toolchain (with
an unlimited number of white spaces before).
This is failing builds since commit 7506c1566998 ("sandbox: Report host
default-filename in native mode").
Add "ccache" prefix to ignore but participate in the matching regex used
by sed to identify the target architecture.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
Commit f9886bc60f42 ("Added arm64 assembly for examples/api crt0") added
the arm64 architecture but the code does not even build.
With the changes the 'demo' program runs on qemu_arm64_defconfig using
setenv autostart no
dhcp demo
setenv autostart yes
bootelf $loadaddr
Link: https://lore.kernel.org/r/20241103053551.52715-1-heinrich.schuchardt@canonical.com
|
|
Commit f9886bc60f42 ("Added arm64 assembly for examples/api crt0")
added a 64-bit target for the examples but did not adjust the demo
code to be 64-bit compatible.
Change variable size for pointers.
Use %p to print pointers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Change the load address on arm64 such that it is compatible with the memory
available on qemu_arm64_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Commit f9886bc60f42 ("Added arm64 assembly for examples/api crt0") tried to
add arm64 support to the examples but crt0.S does not even build for
qemu_arm64_defconfig with CONFIG_API=y, CONFIG_EXAMPLES=y:
examples/api/crt0.S: Assembler messages:
examples/api/crt0.S:32: Error:
expected a register at operand 1 -- `ldr ip,=search_hint'
examples/api/crt0.S:33: Error:
unexpected register type at operand 1 -- `str sp,[ip]'
make[2]: *** [scripts/Makefile.build:292: examples/api/crt0.o] Error 1
Do not define _start twice.
Use valid register names.
Move syscall_ptr and search_hint to the data section to avoid an invalid
relocation.
Fixes: f9886bc60f42 ("Added arm64 assembly for examples/api crt0")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
Since commit 348ea878508d ("cmd: hash: fix param count check") the hash
command cannot be used without the optional variable name parameter if
CONFIG_HASH_VERIFY=y. 'hash sha1 $loadaddr $filesize' returns
CMD_RET_USAGE.
The minimum number of arguments is four no matter if verification is
enabled or not.
Fix the parameter check.
Provide a unit test.
Link: https://lore.kernel.org/r/20241102100836.103005-1-heinrich.schuchardt@canonical.com
|
|
Wadim Egorov <w.egorov@phytec.de> says:
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.
Apply overlays for phyCORE-AM62x and phyCORE-AM64x SoMs.
Future K3 SoMs will be able to reuse this logic and overlays.
Link: https://lore.kernel.org/r/20241030164815.1763506-1-w.egorov@phytec.de
|
|
Provide a unit test testing the hash command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Since commit 348ea878508d ("cmd: hash: fix param count check") the hash
command cannot be used without the optional variable name parameter if
CONFIG_HASH_VERIFY=y. 'hash sha1 $loadaddr $filesize' returns
CMD_RET_USAGE.
The minimum number of arguments is four no matter if verification is
enabled or not.
Fixes: 348ea878508d ("cmd: hash: fix param count check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
|
|
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Include SoM dt-overlays that handle variants of our SoMs into
u-boot's FIT image.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Include SoM dt-overlays that handle variants of our SoMs into
u-boot's FIT image.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Enable CONFIG_PHYTEC_SOM_DETECTION to apply SoM overlays
based on EEPROM configuration.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Include SoM dt-overlays for DT control so we can include them
into our u-boot FIT image.
While at it also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Include SoM dt-overlays for DT control so we can include them
into our u-boot FIT image.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Simon Glass <sjg@chromium.org> says:
Labgrid provides access to a hardware lab in an automated way. It is
possible to boot U-Boot on boards in the lab without physically touching
them. It relies on relays, USB UARTs and SD muxes, among other things.
By way of background, about 4 years ago I wrong a thing called Labman[1]
which allowed my lab of about 30 devices to be operated remotely, using
tbot for the console and build integration. While it worked OK and I
used it for many bisects, I didn't take it any further.
It turns out that there was already an existing program, called Labgrid,
which I did not know about at time (thank you Tom for telling me). It is
more rounded than Labman and has a number of advantages:
- does not need udev rules, mostly
- has several existing users who rely on it
- supports multiple machines exporting their devices
It lacks a 'lab check' feature and a few other things, but these can be
remedied.
On and off over the past several weeks I have been experimenting with
Labgrid. I have managed to create an initial U-Boot integration (this
series) by adding various features to Labgrid[2] and the U-Boot test
hooks.
I hope that this might inspire others to set up boards and run tests
automatically, rather than relying on infrequent, manual test. Perhaps
it may even be possible to have a number of labs available.
Included in the integration are a number of simple scripts which make it
easy to connect to boards and run tests:
ub-int <target>
Build and boot on a target, starting an interactive session
ub-cli <target>
Build and boot on a target, ensure U-Boot starts and provide an interactive
session from there
ub-smoke <target>
Smoke test U-Boot to check that it boots to a prompt on a target
ub-bisect <target>
Bisect a git tree to locate a failure on a particular target
ub-pyt <target> <testspec>
Run U-Boot pytests on a target
Some of these help to provide the same tbot[4] workflow which I have
relied on for several years, albeit much simpler versions.
The goal here is to create some sort of script which can collect
patches from the mailing list, apply them and test them on a selection
of boards. I suspect that script already exists, so please let me know
what you suggest.
I hope you find this interesting and take a look!
[1] https://github.com/sjg20/u-boot/tree/lab6a
[2] https://github.com/labgrid-project/labgrid/pull/1411
[3] https://github.com/sjg20/uboot-test-hooks/tree/labgrid
[4] https://tbot.tools/index.html
Link: https://lore.kernel.org/r/20241112141326.643128-1-sjg@chromium.org
[trini: Move the sjg-lab job to prior to world build, to fix pipeline
status]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Simon Glass <sjg@chromium.org> says:
Some tests do not use the unit-test framework. Others are in a suite of
their own, for no obvious reason.
This series tidies this up.
Link: https://lore.kernel.org/r/20241102193715.432529-1-sjg@chromium.org
|
|
Sometimes this breaks, so add a build to keep it working. Since sandbox
enables a lot of options, it is a good board to use. The new config is
created simply by copying the existing sandbox and turning off CMDLINE
Once we have tests for non-CMDLINE operation, this can be adjusted to
run those tests.
Create a new build which will be picked up by CI. Update the maintainer
entry as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Add a way to run tests on a real hardware lab. This is in the very early
experimental stages. There are only 23 boards and 3 of those are broken!
(bob, ff3399, samus). A fourth fails due to problems with the TPM tests.
To try this, assuming you have gitlab access, set SJG_LAB=1, e.g.:
git push -o ci.variable="SJG_LAB=1" dm HEAD:try
This relies on the two previous series targeted at -next as well as the
bugfix series for -master
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
|
Use an 'r' string to avoid a warning:
test/py/tests/test_spi.py:698: DeprecationWarning: invalid escape
sequence '\s'
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The Beagleplay board uses an SoC from the TI K3 family. This has both a
Cortex-R core and a Cortex-A core and the R core needs to come up before
the A core. In both cases we have U-Boot SPL then U-Boot proper being
used.
In practice this means we need two entirely separate builds to produce
an image.
Handle this in test.py by adding more parameters.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This can take a while and involve multiple steps (e.g. turning the board
back off). Add a section for it and show the output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Send the Labgrid quit characters to ask it to exit gracefully. This
typically allows it to power off the board being used. Only do this when
labgrid is being used (detected with an env var).
If that doesn't work, try the less graceful approach.
The normal approach for pytest is to simply kill the child process. This
makes Labgrid exit immediately. Thus it does not get a chance to execute
the 'off' part of strategy (which may power it off) and release the
device.
Without this, every board disconnect leaves the board in a bad state,
requiring separate steps to recover the board, then power it off.
The action is conditional on since USE_LABGRID_SJG being set, so only
affects operation if the Labgrid-sjg integration is being used.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There is a very annoying bug at present where the terminal echos part
of the first command sent to the board. This happens because the
terminal is still set to echo for a period until Labgrid starts up and
can change this.
Fix this by disabling echo (and other terminal features) as soon as the
spawn happens.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
