| Age | Commit message (Collapse) | Author |
|---|
|
The "include" directory was included in the include path... Remove it.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
If open() fails it returns -1. Calling close() with this value
makes no sense. Return -EIO instead.
Addresses-Coverity-ID: 185828 Improper use of negative value
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: 566bf3a8698 ("sandbox: Add a function to read a host file")
Reviewed-by: Sean Anderson <seanga2@gmail.com>
|
|
When we find a certificate on an image to be booted on a GP device we
print out a message explaining that the certificate is being skipped.
This message is rather long and is printed for every image. Shorten
the message and make the long version into a debug message.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
EMMC boot can fail due to the size of R5 SPL image growing beyond the
500KB of memory allocated in eMMC. Update offsets for eMMMC raw boot
to load each binary from the correct address in eMMC according to the
following eMMC layout:
boot0/1 partition
0x0+----------------------------------+
| tiboot3.bin (1 MB) |
0x800+----------------------------------+
| tispl.bin (2 MB) |
0x1800+-----------------------------------+
| u-boot.img (4 MB) |
0x3800+-----------------------------------+
| environment (128 KB) |
0x3900+-----------------------------------+
Signed-off-by: Judith Mendez <jm@ti.com>
|
|
Modify defconfig to use generic timer and npcm reset driver
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
|
|
The FAT specification requires that the change date is set.
If a DM RTC device exists, set the creation and change date to the current
date when updating the directory entry. Otherwise use the date 2020-01-01.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
The month is stored in 5 - 8. We need to shift it by 5 bits.
Cf. Microsoft FAT Specification, 2005-08-30
Fixes: 13c11c665320 ("fs: fat: add file attributes to struct fs_dirent")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
This is a trivial but significant optimization:
mkimage took >200ms (and 49489 writes (of which 49456 512)),
now it takes 110ms (and 419 writes (of which 386 64k)).
sendfile is much more appropriate for this and is done in one syscall,
but doesn't bring any significant speedups over 64k r/w
at the 13M size ranges, so there's no need to introduce
#if __linux__
while((size = sendfile(fd_dst, fd_src, NULL, 128 * 1024 * 1024)) > 0)
;
if(size != -1) {
ret = 0;
goto out;
}
#endif
Also extract the buffer size to a macro.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
|
|
Fix typos in test_eficonfig.py: %s/curren/current/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
|
|
When CONFIG_OF_UPSTREAM is enabled, DTS files are in SOC subdirectories (vs the
top level dts directory), but when CONFIG_EFI_CAPSULE_AUTHENTICATE is enabled,
the dynamically created dtsi file containing the capsule ESL DT node is in the
parent directory. This results in a build failure because the #include inserted
in the DTS file is local to the current directory. Update Makefile to have the
DT preprocessing of #includes search in the parent (dts top level) directory
too.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Jonathan Humphreys <j-humphreys@ti.com> says:
Set basic settings needed for System Ready IR ACS testing, for several TI SoC
based platforms: AM64, AM62, AM62p, BeaglePlay, J7, and BeagleboneAI.
For AM64, AM62, and AM62p, also includes some config cleanup. Should be no
functional change.
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
This is required to pass SystemReadyIR tests.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
|
|
mwleeds@mailtundra.com <mwleeds@mailtundra.com> says:
This patch series is needed to get U-Boot to boot from a ZFS filesystem
on an aarch64 computer. Some of the patches are not architecture specific
and would be needed to boot ZFS on other platforms as well. The ZFS
support in U-Boot hasn't been substantively touched in several years and
to me it seems like it must have been broken for a long time on all
platforms, but I have only tested on aarch64.
Since there doesn't seem to be a mantainer for this area who I can cc,
I'm hoping these patches get seen and pulled in by a general U-Boot
maintainer.
[trini: Per Igor's comment and Phaedrus agreement, dropped his Tested-by
on the patches themselves]
|
|
Without this patch, the while loop being modified goes on infinitely,
but with the patch I am able to boot linux on zfs on a jetson tx2 nx.
It seems like this code was never tested because the logic is clearly
wrong. The function do_div(a,b) does a division that modifies the first
parameter to have a = a / b, and returns the remainder of the division.
So clearly in the usual case when file->offset = 0, the line
"blkid = do_div(blkid, blksz);" just results in blkid being set to zero
on every iteration of the loop, rather than being incremented as blocks
are read. Hence the zeroth block is read over and over and this becomes
an infinite loop.
So instead capture the remainder of the division in a "blkoff" variable,
and use that to properly calculate the memory address to move from in
memmove() below.
For example, if file->offset were 1337, on the first iteration of the
loop blkid would be 0 and blkoff would be 1337. If the blksz is 131072
(as it was for me), that amount of data would be copied into
data->file_buf. movesize would be 131072 - 1337 = 129735 so 129735 bytes
would be moved into buf. On the second iteration of the loop (assuming
there is one), red would be 129735, blkid would be 1, blkoff would be 0,
and 131072 bytes would be copied into buf. And so on...
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
|
|
As evidenced by how other filesystems handle it, a return value of 0
from fs_devread() means failure; nonzero means success. The opposite
assumption was being made in zfs.c for the use of zfs_devread() so fix
the confusion by making zfs_devread() return 0 on success.
It probably doesn't make sense to change the handling of zfs_devread()
in zfs.c instead, because as it is it matches the semantics of the other
functions there.
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
|
|
Without this patch, when trying to boot zfs using U-Boot on a Jetson TX2
NX (which is aarch64), I get a CPU reset error like so:
"Synchronous Abort" handler, esr 0x96000021
elr: 00000000800c9000 lr : 00000000800c8ffc (reloc)
elr: 00000000fff77000 lr : 00000000fff76ffc
x0 : 00000000ffb40f04 x1 : 0000000000000000
x2 : 000000000000000a x3 : 0000000003100000
x4 : 0000000003100000 x5 : 0000000000000034
x6 : 00000000fff9cc6e x7 : 000000000000000f
x8 : 00000000ff7f84a0 x9 : 0000000000000008
x10: 00000000ffb40f04 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000000001
x14: 00000000ff7f84bc x15: 0000000000000010
x16: 0000000000002080 x17: 00000000001fffff
x18: 00000000ff7fbdd8 x19: 00000000ffb405f8
x20: 00000000ffb40dd0 x21: 00000000fffabe5e
x22: 000000ea77940000 x23: 00000000ffb42090
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000bab10c x29: 00000000ff7f85f0
Code: d00001a0 9103a000 94006ac6 f9401ba0 (f9400000)
Resetting CPU ...
This happens when be64_to_cpu() is called on a value that exists at a
memory address that's 4 byte aligned but not 8 byte aligned (e.g. an
address ending in 04). The call stack where that happens is:
check_pool_label() ->
zfs_nvlist_lookup_uint64(vdevnvlist, ZPOOL_CONFIG_ASHIFT,...) ->
be64_to_cpu()
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
Fixes: 4d3c95f5ea7c ("zfs: Add ZFS filesystem support")
|
|
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
|
|
This code was hitting the error code path whenever malloc() succeeded
rather than when it failed, so presumably this part of the code hasn't
been tested. I had to apply this fix (and others) to get U-Boot to boot
from ZFS on an Nvidia Jetson TX2 NX SoM (an aarch64 computer).
Signed-off-by: Phaedrus Leeds <mwleeds@mailtundra.com>
|
|
If tcp_seq_num is wrap around, tcp_seq_num >= initial_data_seq_num
isn't satisfied and store_block() isn't called.
The condition has a wrap around issue, so it is fixed in this patch.
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reported-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Fabio Estevam <festevam@denx.de>
|
|
The server sends multiple packets without waiting for an ACK
by window control and if some packets are dropped,
wget will return an ACK including the dropped packets.
Following log indicates this issue.
wget_handler() wget: Transferring, seq=97bbdd4a, ack=30,len=580
wget_handler() wget: Transferring, seq=97bbedca, ack=30,len=580
First packet of TCP sequence number is 0x97bbdd4a.
Second packet of TCP sequence number should be 0x97bbe2ca,
however it is 0x97bbedca and returns its ACK, so the server
suppose that 0x97bbe2ca and 0x97bbedca are received appropriately.
In this case, 0x97bbe2ca was lost and the data of wget was broken.
In this patch, next_data_seq_num holds the next expected
TCP sequence number.
If the TCP sequence number different from next_data_seq_num,
trying to retransmit the packet.
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20348
- Update the imx_rgpio2p to only access one address as per the
dt-schema.
- Remove unused imx9_cpu.c file.
- Only use the LPUART ipg clk for i.MX7ULP.
- Use the correct anatop base for accessing the PLL clocks on i.MX93.
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga
- Add option to reprogram FPGA every reboot, enable this as default in
chameleonv3 defconfig.
- Fixes: Rename CONFIG_SPL_SOCFPGA_SEC_REG to CONFIG_SPL_SOCFPGA_DT_REG,
so the driver can be built when CONFIG_SPL_SOCFPGA_DT_REG is set in
defconfig.
|
|
The PLL clk needs use anatop base, otherwise wrong PLL address will
be used.
Fixes: 9c153e46661b ("clk: imx: add i.MX93 CCF driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
This was wrongly committed, no user, remove it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
To i.MX7ULP compatible lpuart, there is only ipg clk, no per clk.
So add a devtype check for i.MX7ULP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
The i.MX8ULP/93 gpio dt-schema have been updated to only have one
address entry, update the driver to support it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Remove the unused argument about cmd_error.
Fixes: a3b2786651c7 ("mmc: Drop unused mmc_send_tuning() cmd_error parameter")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
The value defaults to 0 and is ignored by dw_mmc code, so the other
users are not affected.
Setting this explicitly fixes some weird reading error found on Hi3798MV200.
Fixes: 8a5dc8140e62 ("mmc: hi6220_dw_mmc: add compatible for HC2910 support")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
As described in [1], some poor hardware or cards would fail to release
the bus and keep driving data lines low. Ignore it and send the next cmd
directly seems okay for most cases.
[1]: https://patchwork.kernel.org/project/linux-mmc/patch/1424458179-5456-1-git-send-email-dianders@chromium.org/
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
CONFIG_DM_RESET enabled
This can avoid hardcoding a clock rate in driver. Also can enable the
clocks and deassert the resets if the pre-bootloader does not do this
for us.
Currently only enabled for Hi3798MV200.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
Place the SDR104/HS200/HS400 checks into the mmc_deinit() and always
call it. This simplifies the code and removes ifdeffery. No functional
change is expected.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
|
|
Do not access SCC when sending commands during tuning operation as that
will disrupt the tuning operation. The tuning operation is adjusting the
SCC settings itself in execute_tuning callback.
When renesas_sdhi_execute_tuning() is called by the MMC core code, a loop
which consists of renesas_sdhi_prepare_tuning(), mmc_send_tuning() and
renesas_sdhi_compare_scc_data() iterates over each SCC tuning tap.
The renesas_sdhi_prepare_tuning() configures the SCC tuning tap number into
hardware, mmc_send_tuning() triggers transfer of tuning block which depends
on the bus mode for which the bus is currently being tuned, this information
is supplied by the MMC core code, and finally renesas_sdhi_compare_scc_data()
tests the received tuning block for validity.
Because renesas_sdhi_prepare_tuning() configures the SCC tuning tap into
the hardware to fit the tuning operation, mmc_send_tuning() which triggers
command transfer using renesas_sdhi_send_cmd() must not manipulate with
the SCC in any way. Currently renesas_sdhi_send_cmd() does unconditionally
call renesas_sdhi_check_scc_error(), which may adjust the SCC tuning tap
position by writing RENESAS_SDHI_SCC_TAPSET, which would overwrite the
required tuning configuration set by renesas_sdhi_prepare_tuning() and
disrupt the tuning operation.
Fix this by skipping the renesas_sdhi_check_scc_error() call in case the
MMC subsystem is in tuning state. This way, the SCC settings are left
unmodified by command transfer during tuning operation.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
Set generic mmc->tuning flag when performing tuning to indicate
this condition to drivers. Drivers may use this to bypass various
checks during tuning.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
This hs400_tuning is a flag, make it bool. No functional change.
This will be useful in the following patch, which adds another
more generic flag, where the compiler can better use the space
now reserved for the u8 to store more flags in it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
The current code uses the state of tuning block received by SCC to
determine whether or not to send transmission stop command. This is
not correct. Use the state of tuning block transfer to determine
whether or not to send transmission stop command instead, because
the transmission stop command has to be sent in case the tuning
block transfer failed.
This requires two changes, separate variable to store and check the
state of tuning block received by SCC, and another separate variable
to store and check return value from transmission stop command.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
