summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-14common: Move autoprobe out to board initSimon Glass
Rather than doing autoprobe within the driver model code, move it out to the board-init code. This makes it clear that it is a separate step from binding devices. For now this is always done twice, before and after relocation, but we should discuss whether it might be possible to drop the post-relocation probe. For boards with SPL, the autoprobe is still done there as well. Note that with this change, autoprobe happens after the EVT_DM_POST_INIT_R/F events are sent, rather than before. Link: https://lore.kernel.org/u-boot/20240626235717.272219-1-marex@denx.de/ Signed-off-by: Simon Glass <sjg@chromium.org>
2025-01-14dm: core: Simplify dm_probe_devices()Simon Glass
There is no point in checking the pre_reloc flag, since devices not marked as pre-reloc will not have been bound, so won't exist yet. There doesn't seem to be any point in checking if the device has a valid devicetree node either, so drop that too. Signed-off-by: Simon Glass <sjg@chromium.org>
2025-01-14common: Drop check for DM in initf_dm()Simon Glass
This is enabled by all boards, so drop the condition. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2025-01-14Merge tag 'xilinx-for-v2025.04-rc1-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze AMD/Xilinx changes for v2025.04-rc1 v2 Versal: - Enable dfu support for SPI with multiboot ZynqMP: - Align multiboot reg description - DT syncups - Wire missing DTs in defconfig - Kria: Remove usb hub initialization via commands - Kria: Update DP reset in psu_init AMD/Xilinx: - Enable SPI_STACKED_PARALLEL configs SPI/ZYNQMP_GQSPI: - Update debug message to use log_debug() RTC: - Enable ZYNQMP_RTC for Versal SOCs
2025-01-14Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-pmicTom Rini
2025-01-14rtc: zynqmp: allow on Versal architecturesVincent Fazio
Allow the ZyncMP RTC driver to be enabled on Versal architectures. Also, require DM_RTC since the driver uses the RTC driver model. Signed-off-by: Vincent Fazio <vfazio@xes-inc.com> Link: https://lore.kernel.org/r/20250114135812.2605618-1-vfazio@xes-inc.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-01-14zynqmp_gqspi: update to log_debugIbai Erkiaga
Update recent parallel memory support code to move to log_debug instead of debug as per logging in U-Boot documentation Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com> Link: https://lore.kernel.org/r/20250107145110.2855213-1-ibai.erkiaga-elorza@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-01-14board: xilinx: Add missing prototype for set_dfu_alt_infoVenkatesh Yadav Abbarapu
Add missing prototype to fix the sparse warning, warning: no previous prototype for 'set_dfu_alt_info' [-Wmissing-prototypes]. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20250106090630.209938-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-01-14arm64: zynqmp: Add eeprom labels for System Controller dtsJonathan Stroud
Label all eeproms so we can open by label rather than a fixed i2c address. Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/878558c3c859599d29bc4ae2278baebf84b368e0.1736152966.git.michal.simek@amd.com
2025-01-14arm64: zynqmp: Enable iio-hwmon description only for SOMMichal Simek
Description is coming from SOM only that's why enable it only on SOM. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/08ee4ce2fe242905dd99cea2b87373b57d8fea91.1736152939.git.michal.simek@amd.com
2025-01-14config: xilinx: Enable the SPI_STACKED_PARALLEL config optionVenkatesh Yadav Abbarapu
Enable the SPI_STACKED_PARALLEL config option for all AMD/xilinx platforms, as this is required for parallel and stacked memories. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20250103044812.18828-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-01-14board: zynqmp: zynqmp-sm-k26-revA: release DP from resetNeal Frager
This releases the DP configuration from reset early on during the boot process for K26 SOM. It will also avoid the boot hang situation should any attempt be made to configure the DP registers while it is still in reset. Fixes the same issue as described by the commit 8b81010a2fe3 ("video: zynqmp: Add support for reset"). Signed-off-by: Neal Frager <neal.frager@amd.com> Link: https://lore.kernel.org/r/20241218130129.687650-1-neal.frager@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-01-14xilinx: Sort OF_LIST and add missing vpk120 and zcu670 platformsMichal Simek
Sort OF_LIST entries and also add missing vpk120 and zcu670 platforms. Compilation is failing when these DTs are exported via DEVICE_TREE because binman is not able to create a link for default configuration. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/505996b6ef969b1b677ab921462c75c798c366e7.1734335553.git.michal.simek@amd.com
2025-01-14zynqmp: Remove usb init initialization for KriaMichal Simek
USB hub initialization is done by driver introduced by commit 09f557e106ef ("usb: onboard-hub: Add i2c initialization for usb5744 hub") that's why there is no need to do initialization via variables. Reported-by: Love Kumar <love.kumar@amd.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/96e9c80aeeed4e9664858bf236476997d17a9914.1734522042.git.michal.simek@amd.com
2025-01-14arm64: zynqmp: Sync DTs with Linux v6.13-rc1Michal Simek
Sync zynqmp* DTS files with v6.13-rc1 Linux kernel including three patches from Sean: arm64: zynqmp: Enable AMS for all boards arm64: zynqmp: Expose AMS to userspace as HWMON arm64: zynqmp: Add thermal zones Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/06e466d64c9d8e718e2f06a76cc65d6da2a37a7b.1733996500.git.michal.simek@amd.com
2025-01-14arm64: zynqmp: add clock-output-names property in clock nodesNaman Trivedi
Replace underscores with hyphens in the clock node names as per dt-schema rule. Also, add clock-output-names property to all clock nodes, so that the resulting clock name do not change when clock node name is changed. Signed-off-by: Naman Trivedi <naman.trivedimanojbhai@amd.com> Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1080e31393c3e1b49735b77e7ddc14d570b83222.1733991159.git.michal.simek@amd.com
2025-01-14arm64: zynqmp: Do not use hardcoded address in do_zynqmp_reboot()Michal Simek
multi_boot is already the part of csu_base structure that's why use it directly instead of using register offset value. Fixes: fc001432e5b0 ("arm64: zynqmp: Add u-boot command to boot into recovery image") Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3e5c6ea426b81cc73b90e6425764e41a98deb2a6.1733735454.git.michal.simek@amd.com
2025-01-14arm64: versal: RO multi_boot register in non JTAG bootmodeMichal Simek
The main reason for this change is that upstream QEMU has no multiboot register implemented that's why access to it fails which ends up in CI failure for our target. That's why in JTAG bootmode returns 0 which is correct behaviour because multiboot register is not used in this mode and value should be ignored and as a side effect it is also fixing CI/Qemu issue. Also move versal_get_bootmode() to avoid function declaration. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/484b9cafc45e72308a1a29a3ab772020f96784cc.1736155238.git.michal.simek@amd.com
2025-01-14arm64: versal: Support operations around multiboot registerMichal Simek
Read multiboot register and show it's value by default. Also extend logic in dfu_alt_info string generation to support capsule update for different offsets. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/72ba2efd0fb7b66a86b409a1521fe288a4dd3453.1733395093.git.michal.simek@amd.com
2025-01-14arm64: versal: Wire SPIs for dfu_alt_info variable generationMichal Simek
Enable automatic dfu_alt_info variable generation based on MTD partition. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/67ff88c8c7186138353c0b74ed37a318fb4b199e.1733395093.git.michal.simek@amd.com
2025-01-14power: pmic: tps65941: Fix TI TPS65224 PMIC compatiableUdit Kumar
Fix compatiable name for TPS65224 PMIC as defined in dts/upstream/Bindings/mfd/ti,tps6594.yaml bindings. Fixes: 1468fbba6d55("power: pmic: tps65941: Add TI TPS65224 PMIC") Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-01-14power: replace magic numbers with macrosShree Ramamoorthy
Replace magic numbers in buckval2votl() & buckvolt2val() with macros to help with clarity and correlate what the numbers correspond to in the TPS65219 datasheet. Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-01-14power: regulator: replace printf() with pr_err()Shree Ramamoorthy
Replace printf() with pr_err() because pr_err() has a uniform print format and takes into consideration the log levels supported. Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-01-13Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
- ehci-mx5/ehci-mx6 driver improvements
2025-01-13usb: ehci-mx6: Add i.MX95 supportMarek Vasut
i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2025-01-12Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
2025-01-12arm64: renesas: Convert boards over to is_cortex_a() functionsMarek Vasut
Use generic is_cortex_a() functions instead of open-coded midr_el1 read. No functional change. Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-01-12arm64: Add MIDR entries for Cortex-A57 and Cortex-A76Marek Vasut
Add MIDR entries for Cortex-A57 and Cortex-A76 cores. Those are used on R-Car Gen3 and Gen4 SoCs respectively. Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-01-12arm64: Convert core type check macros into inline functionsMarek Vasut
Turn the core type check macros into inline functions to perform better type checking on them. The inline functions get optimized out in case they are not used. Indent the MIDR_PARTNUM_CORTEX_An macros in preparation for addition of future three-digit cores and use MIDR_PARTNUM_SHIFT in MIDR_PARTNUM_MASK to be consistent. Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-01-10Merge tag 'u-boot-rockchip-20250110' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/24129 - Add boards: rk3566: FriendlyARM NanoPi R3S rk3588s: Radxa ROCK 5C, rk3588: Khadas Edge2 - Migrate to OF_UPSTREAM: rk3066a/rk3188; rk3288: tinker, miqi, firefly; - Migrate to TPL: rk3399 kevin and bob;
2025-01-10rockchip: rk3308: Implement checkboard() to print SoC variantJonas Karlman
Implement checkboard() to print current SoC variant used by a board, e.g. one of: SoC: RK3308 SoC: RK3308B SoC: RK3308B-S when U-Boot proper is running. U-Boot 2025.01-rc1 (Nov 02 2024 - 20:26:25 +0000) Model: Radxa ROCK Pi S SoC: RK3308B DRAM: 512 MiB (effective 510 MiB) Information about the SoC variant is read from GRF. Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2025-01-10rockchip: rk3588: Implement checkboard() to print SoC variantJonas Karlman
Implement checkboard() to print current SoC model used by a board, e.g. one of: SoC: RK3582 SoC: RK3588 SoC: RK3588J SoC: RK3588S SoC: RK3588S2 when U-Boot proper is running. U-Boot 2025.01-rc1 (Nov 10 2024 - 00:31:29 +0000) Model: Generic RK3588S/RK3588 SoC: RK3588S2 DRAM: 8 GiB Information about the SoC model and variant is read from OTP. Also update rk3588s-u-boot.dtsi to include OTP in U-Boot pre-reloc phase, where checkboard() is called. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk356x: Implement checkboard() to print SoC variantJonas Karlman
Implement checkboard() to print current SoC model used by a board, e.g. one of: SoC: RK3566 SoC: RK3566T SoC: RK3568 SoC: RK3568B2 SoC: RK3568J when U-Boot proper is running. U-Boot 2025.01-rc1 (Nov 10 2024 - 00:39:37 +0000) Model: Generic RK3566/RK3568 SoC: RK3568J DRAM: 8 GiB (effective 7.7 GiB) Information about the SoC model and variant is read from OTP. Also update rk356x-u-boot.dtsi to include OTP in U-Boot pre-reloc phase, where checkboard() is called. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-rock-pi-4: Fix Synchronous AbortJonas Karlman
After the commit 788cf33315c7 ("efi: add a helper to generate dynamic UUIDs") update_info.num_images must match number of valid update images. On Rock Pi 4 following Synchronous Abort can be observed due to fw_name being NULL: Scanning global bootmeth 'efi_mgr': "Synchronous Abort" handler, esr 0x96000010, far 0x0 elr: 0000000000200e28 lr : 000000000028adb8 (reloc) elr: 00000000f3efbe28 lr : 00000000f3f85db8 x0 : 0000000000000000 x1 : ffffffffffffffff x2 : 0000000000000000 x3 : 000000000000000e x4 : 0000000000000000 x5 : 00000000f1ef0d78 x6 : 00000000f3fb3b90 x7 : 0000000000000044 x8 : 0000000000000010 x9 : 0000000000000031 x10: 00000000f0ea3fff x11: 00000000f1f29e00 x12: 0000000000000002 x13: fffffffffffff000 x14: 00000000f1f29e00 x15: 0000000000000018 x16: 00000000f3f44f7c x17: 0000000000000000 x18: 00000000f1ef2de0 x19: 00000000f0ea3040 x20: 00000000f3ff53d8 x21: 00000000f3fd0498 x22: 0000000000000000 x23: 00000000f1edb960 x24: 00000000f1edb95f x25: 00000000f1edb990 x26: 00000000f1edb964 x27: 00000000f1edb998 x28: 00000000f1edc1ec x29: 00000000f1edb820 Code: aa0003e2 d2800000 eb01001f 54000060 (78607843) Resetting CPU ... resetting ... Fix this by setting update_info.num_images to 0 when no valid update images is added to update_info. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2025-01-10clk: rockchip: rk3588: fix mask define for aclk_vop_rootHeiko Stuebner
The mask for aclk_vop_root is 3-bit wide, not 2-bit wide according to the TRM, so set the mask accordingly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3588-nanopc-t6-lts: Add missing board -u-boot.dtsiJonas Karlman
The commit 7cec3e701940 ("rockchip: rk3588-nanopc-t6: Add support for NanoPC-T6 LTS") added support for the LTS variant of NanoPC T6. However, a board specific -u-boot.dtsi file was never added. Due to the missing -u-boot.dtsi file the LTS fdt included in the FIT is never tagged with bootph props. When ENV_IS_IN_SPI_FLASH is enabled, not enabled in defconfig, the env can successfully load from SPI flash on the non-LTS variant, something that does not work on the LTS variant due to missing bootph-some-ram props in the LTS fdt. Fix this by adding a LTS -u-boot.dtsi file that just include the non-LTS -u-boot.dtsi file. Reported-by: Ricardo Pardini <ricardo@pardini.net> Fixes: 7cec3e701940 ("rockchip: rk3588-nanopc-t6: Add support for NanoPC-T6 LTS") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399: Drop unneeded bob and kevin board specific codeJonas Karlman
The IO-domain driver will configure io_vsel and always-on/boot-on regulators will be enabled based on the board device tree now that required nodes and Kconfig options is enabled for SPL. Remove the bob and kevin board specific code from the common rk3399.c, the IO-domain and regulator driver provide similar functionality. Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2025-01-10rockchip: rk3399-gru: Include pinctrl and regulators in SPLJonas Karlman
Add bootph props and enable related Kconfig options to include vital regulators in SPL. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Use SDMA mode to read from eMMCJonas Karlman
Enable use of SDMA mode when reading from eMMC to speed up boot. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Enable dcache and signature validation in SPLJonas Karlman
With TPL being used to init DRAM, SPL being used to load FIT and the adjusted FIT payload offset it is now possible to increase the size limit of SPL to 256 KB and enable uses of dcache and FIT signature validation. Drop SPL_SYS_DCACHE_OFF=y to enable use of dcache in SPL. Drop SPL_FIT_SIGNATURE=n to enable signature validation of FIT in SPL. Change SPL_MAX_SIZE to 256 KB now that payload offset has moved in SPI and TF-A may be loaded to 0x40000 in DRAM. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Remove unused nodes from xPL control FDTJonas Karlman
The eMMC PHY and SPI flash is not used in all xPL phases. Change to no longer include emmc_phy and spi_flash in all xPL phases. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399: Drop common Kconfig options already impliedJonas Karlman
The last two RK3399 boards, chromebook bob and kevin, have now migraded to use common bss and stack addresses. Cleanup and remove Kconfig options no longer needed in rk3399/Kconfig when all boards now use common bss and stack addresses. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom imageJonas Karlman
The u-boot.rom image contain u-boot.img FIT instead of the FIT generated by binman for the u-boot-rockchip.bin image. Change to include the binman generated FIT for the u-boot.rom image. This change result in TF-A being included and the use sha256 instead of crc32 checksum in the u-boot.rom FIT. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Use TPL with common bss and stack addressesJonas Karlman
Migrate to use TPL, common bss, stack and malloc heap size and addresses to unify memory use in TPL, SPL and pre-reloc with other RK3399 boards. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Disable TPL_BLOBLIST) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Fix include of TPL in u-boot.rom imageJonas Karlman
The chromebook specific u-boot.rom image does not include TPL when building with TPL=y or ROCKCHIP_EXTERNAL_TPL=y. Fix this by adding rockchip-tpl and u-boot-tpl nodes to the mkimage node for the u-boot.rom binman image. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Move SPI flash payload offset for bob and kevinJonas Karlman
The BootROM on RK3399 only read the first 2 KB of each 4 KB page from SPI flash. With current FIT payload offset of 0x40000 this limits the supported TPL+SPL size to only 128 KB. Change to use 0xE0000 as FIT payload offset, similar to other RK3399 boards, to allow a maximum size for TPL of 192 KB and SPL of 256 KB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset propJonas Karlman
Use the offset configured with SYS_SPI_U_BOOT_OFFS Kconfig option instead of a hardcoded 0x40000 for the FIT payload offset. This has no intended impact as SYS_SPI_U_BOOT_OFFS=0x40000. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399: Fix TPL build of bob and kevinJonas Karlman
Building chromebook_bob/kevin with TPL=y ends with a linking error: arch/arm/mach-rockchip/rk3399/rk3399.o: in function `board_debug_uart_init': arch/arm/mach-rockchip/rk3399/rk3399.c:148:(.text.board_debug_uart_init+0x34): undefined reference to `spl_gpio_output' arch/arm/mach-rockchip/rk3399/rk3399.c:148:(.text.board_debug_uart_init+0x34): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `spl_gpio_output' make[2]: *** [scripts/Makefile.xpl:542: tpl/u-boot-tpl] Error 1 make[1]: *** [Makefile:2134: tpl/u-boot-tpl] Error 2 make: *** [Makefile:568: __build_one_by_one] Error 2 Change to only use spl_gpio functions in SPL to fix this. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10rockchip: rk3399: expand space for decompressed kernelFUKAUMI Naoki
fix following error by using same ENV_MEM_LAYOUT_SETTINGS with rk35xx: U-Boot 2025.01-rc3-00001-g1527c7dcdb01 (Dec 02 2024 - 22:57:18 +0000) : Retrieving file: /boot/extlinux/../nixos/dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-Image Retrieving file: /boot/extlinux/../nixos/6fq8fmmab31yxdwcs7zw44p78fq9fy1s-initrd-linux-6.12.1-initrd append: init=/nix/store/yjbxgzf1vkwbw6ab738bf4kxazhyypa1-nixos-system-rock-5b-25.05.20241201.ac35b10/init console=ttyS2,1500000n8 console=ttyAMA0,115200n8 console=tty0 loglevel=7 Retrieving file: /boot/extlinux/../nixos/dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-dtbs/rockchip/rk3399-rock-4se.dtb Moving Image from 0x2080000 to 0x2200000, end=0x60d0000 ERROR: RD image overlaps OS image (OS=2200000..60d0000) Boot failed (err=-14) $ ls -lh boot/nixos/ total 84M -r--r--r-- 1 root root 24M Jan 1 1970 6fq8fmmab31yxdwcs7zw44p78fq9fy1s-initrd-linux-6.12.1-initrd -r--r--r-- 1 root root 62M Jan 1 1970 dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-Image dr-xr-xr-x 36 root root 4.0K Jan 1 1970 dhqjsnprmzjxncil3m0g9l09a479crn3-linux-6.12.1-dtbs similar problem was fixed for rk35xx by: commit 69b73877f02c ("rockchip: rk35xx: expand space for decompressed kernel") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2025-01-10board: theobroma-systems: Update TF-A setup steps for RK3588 boardsDaniel Semkowicz
ddrbin_tool interface has been changed. Additional chip_name argument is now required to modify ddr binary file. Update documentation to be consistent with the new interface. Update BL31 and ROCKCHIP_TPL file paths to match current version of binaries available in the rkbin repository. Signed-off-by: Daniel Semkowicz <dse@thaumatec.com> Acked-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-17 08:37:05 +0000