summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-20arch: arm: mach-k3: j784s4_init: Set CTRL_MMR for AUDIO_REFCLK1 clk_selJayesh Choudhary
The default value for the mux to select the parent clock, AUDIO_REFCLK1_CTRL_CLK_SEL is '11111' (31) but the mux input for 31 is marked as 'Reserved' so the ti-sci-clk call for get-parent fails. Mark it to a valid value, '11100' (28) for MAIN_PLL4_HSDIV2_CLKOUT to get rid of the linux failures during boot-time like: "[ 1.573193] ti-sci-clk 44083000.system-controller:clock-controller: get-parent failed for dev=157, clk=34, ret=-19" Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
2025-01-20fs: eliminate YAFFS2 implementationHeinrich Schuchardt
Upstream development stopped 2012. Linux eliminated YAFFS2 in 2010. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2025-01-18Merge patch series "add the support of sha256_hmac and sha256_hkdf"Tom Rini
Philippe Reynes <philippe.reynes@softathome.com> says: This serie adds the support of sha256_hmac and sha256_hkdf. A first version was sent several months ago just before the integration of mbedtls. This new version is based on mbedtls. The first patch of this serie add the support of hkdf using mbedtls. Link: https://lore.kernel.org/r/20241219130554.49825-1-philippe.reynes@softathome.com
2025-01-18configs: sandbox: enable mbedtlsPhilippe Reynes
Enable mbedtls to have at least one config with mbedtls enabled. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2025-01-18test: lib: add test for key derivationPhilippe Reynes
Adds a test for the function sha256_hkdf. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
2025-01-18lib: mbedtls: sha256: add support of key derivationPhilippe Reynes
Adds the support of key derivation using the scheme hkdf. This scheme is defined in rfc5869. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
2025-01-18test: lib: add test for sha256_hmacPhilippe Reynes
Adds a test for the function sha256_hmac Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
2025-01-18lib: sha256: add feature sha256_hmacPhilippe Reynes
Adds the support of the hmac based on sha256. This implementation is based on rfc2104. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
2025-01-18lib: sha256: move common function to sha256_common.cPhilippe Reynes
The function sha256_csum_wd is defined in lib/sha256.c and in lib/mbedtls/sha256.c. To avoid duplicating this function (and future function), we move this function to the file lib/sha256_common.c Reviewed-by: Raymond Mao <raymond.mao@linaro.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2025-01-18mbedtls: enable support of hkdfPhilippe Reynes
Adds the support of key derivation using the scheme hkdf. Reviewed-by: Raymond Mao <raymond.mao@linaro.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2025-01-18tools: renesas_spkgimage.h: use linux/compiler_attributes.hPhilippe Reynes
The attribute __packed was defined in the file tools/renesas_spkgimage.h but this attribute is already defined in linux/compiler_attributes.h. So we include <linux/compiler_attributes.h.h> and do not define __packed. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2025-01-18tools: kwbimage.h: use linux/compiler_attributes.hPhilippe Reynes
The attribute __packed was defined in the file tools/kwbimage.h but this attribute is already defined in linux/compiler_attributes.h. So we include <linux/compiler_attributes.h.h> and do not define __packed. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2025-01-18Merge tag 'efi-2025-04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request efi-2025-04-rc1 Documentation: * Correct the defconfig name in the coolpi documentation UEFI: * Carve out the biggest part of the RISC-V and ARM linker scripts for EFI binary into a common include. * Correct the values of SizeOfCode and SizeOfInitializedData in generated EFI binaries for RISC-V and ARM. * Avoid gaps between sections in EFI binaries causing a failure in secure boot. * Makefile: let clean remove capsule_in.capsule*.efi-capsule * Refactor some of the code used for launching EFI binaries.
2025-01-18Gitlab: Add DEFAULT_FAST_ARM64_TAG as wellTom Rini
Upon further consideration, we should have both DEFAULT_FAST_ARM64_TAG and DEFAULT_ARM64_TAG values available. This will allow us to later run a matrix of some jobs, such as sandbox, on any arm64 host and still keep the world build to only fast arm64 hosts. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-01-18squashfs: Fix sqfs_inode_size() for xattr related SQFS_LSYMLINK_TYPENorbert van Bolhuis
A squashfs filesystem with extended attributes (xattrs) may have inodes of type SQFS_LSYMLINK_TYPE. This might cause u-boot to fail to handle the filesystem since it assumes a SYMLINK_TYPE and LSYMLINK_TYPE inode are the same size. This is wrong, see: https://github.com/plougher/squashfs-tools/blob/master/squashfs-tools/read_fs.c#L421 Using the mksquashfs '-no-xattrs' argument is probably best, but the mksquashfs '-xattrs' argument is the default. This patch fixes squashfs image handling by making sure parsing the uncompressed inode_table (with sqfs_find_inode) succeeeds. The only change needed is correctly determining the size of a SQFS_LSYMLINK_TYPE inode. Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
2025-01-18qconfig.py: Update resync messageTom Rini
When using qconfig.py to resync defconfig files and commit the result, update it to say: Resync all defconfig files using qconfig.py Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2025-01-18Makefile: Make sure all linker input objects existMarek Vasut
In case the build system builds a directory with empty Makefile, one which does not contain any obj-y entries, the build fails to link due to missing built-in.o . This happens because of this part of scripts/Makefile.build 81 ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) 82 builtin-target := $(obj)/built-in.o 83 endif which does not assign builtin-target in case obj-y is empty. The built-in target is then not built at all, and built-in.o is not generated by this part of scripts/Makefile.build 325 ifdef builtin-target 326 quiet_cmd_link_o_target = AR $@ 327 # If the list of objects to link is empty, just create an empty built-in.o ... 335 targets += $(builtin-target) 336 endif # builtin-target This is the correct behavior. The final link however expects the built-in.o to exist in every directory included in the build, even in those where the aforementioned code skipped generation of built-in.o . Make sure the built-in.o does exist for every directory used in final link simply by doing touch on every built-in.o used for the link, which will create empty built-in.o in case any built-in.o is missing. A possible alternative fix is the always define the builtin-target and always generate built-in.o . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
2025-01-18Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
2025-01-18arm64: dts: renesas: Deduplicate extalr_clk bootph-allMarek Vasut
Most R-Car Gen3 and Gen4 systems require extalr_clk very early in the boot process. Currently the extalr_clk { bootph-all } DT property to indicate this clock should be available early is set in each SoC U-Boot DT extras file. Deduplicate this assignment to new common r8a779x-rcar64-u-boot.dtsi file. Note that R-Car Gen3 R8A77990 E3 and R8A77995 D3 and RZ R8A774C0 do not require extalr_clk early, therefore these SoCs still include plain r8a779x-u-boot.dtsi in their U-Boot DT extras . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-01-18arm64: renesas: Rewrite u-boot-elf.srec base address if PIE for R-Car Gen3Marek Vasut
The flash_writer tool and previous recovery tools require the SREC load address to be 0x5000_0000 . The PIE U-Boot build sets the address to 0x0 instead, so override the address back to make u-boot-elf.srec compatible with the recovery tools. Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-01-17efi_loader: Make efi_run_image() staticSimon Glass
This function is not called from outside this file and has no entry in the header file, so mark it static. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2025-01-17efi_loader: Refactor device and image paths into a functionSimon Glass
Move this code into a function so it can be called from elsewhere. Note that the recently added network code uses the same 'global variable' approach. It could use a separate clean-up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2025-01-17Makefile: let clean remove capsule_in.capsule*.efi-capsuleHeinrich Schuchardt
Update the CLEAN_FILES list to remove capsule*.*.efi-capsule. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17efi_loader: use include in ARM EFI linker scriptHeinrich Schuchardt
Use the same include as arm64 for the linker script. Adjust the 32-bit ARM PE-COFF header accordingly and harmonize it with the 64-bit ARM header. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17efi_loader: correct SizeOfCode, SizeOfInitializedDataHeinrich Schuchardt
The fields SizeOfCode, SizeOfInitializedData, and SizeOfUninitializedData are define in the PE-COFF specification [1]. * SizeOfCode must match the size of all .text sections. * SizeOfInitializedData must match the size of all .data sections. * SizeOfUninitializedData must match the size of all .bss sections. We only have one .text and one .data section. SizeOfCode and SizeOfInitializedData have to be calculated as the difference between the end and the start of the respective section. As we don't have any .bss sections in the generated EFI binaries. SizeOfUninitializedData must remain 0. [1] https://learn.microsoft.com/en-us/windows/win32/debug/pe-format Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17efi_loader: use INCLUDE in EFI linker scriptsHeinrich Schuchardt
Except for the architecture specific lines ARM and RISC-V can use the same linker script. Move the common lines to an include. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17scripts/Makefile.lib: add -L option to LD command for EFI binariesHeinrich Schuchardt
The linker uses the path specified with -L to search for linker scripts and for linker script includes. For out-of-tree builds specify the build directory with -L instead of the absolute path of the linker script. This allows using an INCLUDE statement. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17efi_loader: Fix section alignment on EFI binariesIlias Apalodimas
When creating EFI binaries, the alignment of the text section isn't correctly factored in. As a result trying to load signed EFI binaries throws an error with: efi_image_region_add() efi_image_region_add: new region already part of another Image not authenticated Running the binary through sbverify has a similar warning sbverify ./lib/efi_loader/helloworld.efi warning: gap in section table: .text : 0x00001000 - 0x00001c00, .data : 0x00002000 - 0x00002200, gaps in the section table may result in different checksums warning: data remaining[7680 vs 12720]: gaps between PE/COFF sections? ..... If we include the alignment in the text section, the signed binary boots fine, and the relevant sbverify warning goes away sbverify ./lib/efi_loader/helloworld.efi warning: data remaining[8704 vs 12720]: gaps between PE/COFF sections? ..... We should look into the remaining warning at some point as well regarding the gaps between PE/COFF sections. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17doc: coolpi: Fix the defconfig nameAndy Yan
The defconfig name should be: coolpi-cm5-genbook-rk3588_defconfig Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-01-17Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/24215 - RISC-V: Add "riscv,isa-extensions" and multi-letter extension parsing support - RISC-V: Add default cache line size - Board: Canaan: Add K230-CanMV support - Board: VisionFive2: Split out target specific configuration
2025-01-16Merge tag 'u-boot-imx-master-20250116' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24221 - Enable watchdog command on Capricorn board. - Convert imx8m evk boards to BOOTSTD. - Enable dynamic mmcdev setting on imx8m evk boards. - Fix i.MX FDT cooling-device property corruption. - Add OP-TEE support on Phycore i.MX8M boards.
2025-01-16imx: fdt: fix cooling-device property corruptionSébastien Szymanski
The function disable_thermal_cpu_nodes() corrupts the cooling-device property. For example, booting an i.MX93 devices with only one A55 core (IMX93x1) with the cooling-device property set to: $ dtc -I dtb foo.dtb | grep cooling-device cooling-device = <0x08 0xffffffff 0xffffffff 0x09 0xffffffff 0xffffffff>; Linux shows the following error at boot: [ 1.715189] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 1083699869 [ 1.723977] thermal_sys: Add a cooling_device property with at least one device [ 1.731285] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-devfreq-0 failed:-2 because the cooling-device property in the device tree passed to the kernel is $ dtc -I dtb /sys/firmware/fdt | grep cooling-device cooling-device = <0x4097f29d 0x00 0xb05aef9d>; The issue is because the wrong variable type is passed to the function fdt_setprop() called in the function disable_thermal_cpu_nodes(). With the variable type fixed, the error at boot is gone and the property is properly set: $ dtc -I dtb /sys/firmware/fdt | grep cooling-device cooling-device = <0x08 0xffffffff 0xffffffff>; Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2025-01-16configs: capricorn_cxg3: Enable CMD_WDTAlexander Sverdlin
Capricorn boards have WDT (WDT_SIEMENS_PMIC) and U-Boot is not configured to trigger the WDT. Enable the "wdt" command to be able to stop the WDT from the command line. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2025-01-16doc: phytec: imx8mm: add OP-TEE documentationYannic Moog
Add instructions on how to build and package OP-TEE for the phycore-imx8mm based boards. The build instructions are identical for phyGATE-Tauri-L and phyBOARD-Polis. Also fix missig '-' for TF-A build instructions. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16doc: phytec: imx8mp: add OP-TEE documentationYannic Moog
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE integration. Also add missing '-' to TF-A build instruction while at it. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16phycore-imx8mm_defconfig: add optee load addressYannic Moog
The phyCORE i.MX 8M Mini expects 0x56000000 address to load optee. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16imx8mm-phygate-tauri-l_defconfig: add optee load addressYannic Moog
The phyGATE-Tauri-L expects 0x56000000 address to load optee. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16phycore-imx8mp_defconfig: add optee load addressYannic Moog
The phyBOARD-Pollux expects 0x56000000 address to load optee. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16arm: imx8m: add OP-TEE nodeYannic Moog
Add tee node in SoC u-boot device trees. Use a kconfig entry to specify load and entry addresses for the op-tee image in the respective defconfig. Default IMX8M_OPTEE_LOAD_ADDR is supplied. To keep it simple, the same addresses are used for each SoC as are defined in upstream tf-a (BL32_BASE) [1]. [1] https://github.com/ARM-software/arm-trusted-firmware/tree/master/plat/imx/imx8m Signed-off-by: Yannic Moog <y.moog@phytec.de>
2025-01-16gpio: adp5585: Update compatible stringPeng Fan
i.MX93-11x11-EVK has switched to use upstream device tree, and use "adi,adp5585". Since i.MX93-11x11-EVK is the only user of this driver, so it is safe to drop "adp5585". Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx93-11x11-evk: drop duplicated nodesPeng Fan
The upstream dts already has the lpi2c2 subnodes, so drop the duplicated ones in u-boot dtsi. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mq_evk: Switch to BOOTSTDPeng Fan
Move env to imx8mq_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mq_evk: Enable dynamic settings to mmcdev and mmcrootPeng Fan
Enable dynamic settings to mmcdev and mmcroot for i.MX8MQ-EVK Since we are here, clean up the including headers Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mq_evk: Drop DECLARE_GLOBAL_DATA_PTRPeng Fan
There is no gd used in the board file, so drop DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mq_evk: Cleanup headersPeng Fan
Drop unused headers and sort the order. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mm_evk: Switch to BOOTSTDPeng Fan
Move env to imx8mm_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mm_evk: Enable dynamic settings to mmcdev and mmcrootPeng Fan
Enable dynamic settings to mmcdev and mmcroot for i.MX8MM-EVK Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mn_evk: Switch to BOOTSTDPeng Fan
Move env to imx8mn_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mn_evk: Enable dynamic settings to mmcdev and mmcrootPeng Fan
Enable dynamic settings to mmcdev and mmcroot for i.MX8MN-EVK Signed-off-by: Peng Fan <peng.fan@nxp.com>
2025-01-16imx: imx8mn_evk: Drop DECLARE_GLOBAL_DATA_PTRPeng Fan
There is no users of global data in imx8mn_evk.c, drop it. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-26 16:25:48 +0000