| Age | Commit message (Collapse) | Author |
|---|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Add Libre Computer boards into proper libre-computer board directory
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
|
|
https://source.denx.de/u-boot/custodians/u-boot-nand-flash
This merge request add support for BCMBCA raw nand driver for bcm96846
board that switch using OF_UPSTREAM and allow use onfi ecc params when
they are available in the atmel nand controller
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/22638
|
|
When populating BOOT_TARGET_DEVICES on Amlogic Meson platforms, verify
that the shell commands for accessing the relevant media have been
enabled in the build configuration.
This was already being done for USB, NVME and SCSI devices, but not
for MMC devices or network boot. This meant that configuring U-Boot
without the networking or MMC subsystems/drivers would cause an error
to be thrown during preprocessing.
Signed-off-by: Callum Parsey <callum@neoninteger.au>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241012080340.2596-1-callum@neoninteger.au
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The device tree overlays are not part of the
Android Common Kernel code [1]
Historically, they existed to enable some Android specific
features but they have been removed.
Remove the dtbos logic since these files do no longer exist.
[1] https://android.googlesource.com/kernel/common/+/ac2ea0bb91a3b5f5e71eba66c441e58beca6767e/arch/arm64/boot/dts/amlogic/
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241011-yukawa-aosp-parts-v1-2-7d74aa13ff8e@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Android Common Kernel is over 34MiB now [1]. This does not
include any kernel modules nor the Android ramdisk.
To make sure we are future proof, increase both recovery
and boot partitions to 64 MiB.
[1] https://source.android.com/docs/core/architecture/kernel/gki-android15-6_6-release-builds
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241011-yukawa-aosp-parts-v1-1-7d74aa13ff8e@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The upstream Device Tree for GXBB/GXL/G12A was updated with VPU domain
shared between the VPU and HDMI node, causing a double enable.
Simply store the enable state and avoid enabling twice, fixing
HDMI output on all platforms.
Link: https://lore.kernel.org/r/20241009-u-boot-topic-fix-hdmi-v1-2-2479cd90c4ea@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Align with g12a driver to handle the CLKID_HDMI, CLKID_HDMI_SEL
and CLKID_HDMI_DIV clocks since they were added to the upstream
GXBB/GXL Devicetree on v6.11 with [1]
[1] https://lore.kernel.org/all/20240626152733.1350376-1-jbrunet@baylibre.com/
Link: https://lore.kernel.org/r/20241009-u-boot-topic-fix-hdmi-v1-1-2479cd90c4ea@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
If the regulator is already enabled, this happens if the regulator
is set in regulator-always-on, regulator_set_enable() return -EALREADY.
Ignore the -EALREADY return since it's not an error.
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20241009-u-boot-video-fix-hdmi-supply-already-on-v2-1-4478a28d1f49@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
We were disabling canvas, which causes meson vpu probe failure,
just stop and leave canvas alone.
Fixes: ce9fa7bffc5 ("ARM: dts: meson-g12a: add U-Boot specific DT for graphics")
Link: https://lore.kernel.org/r/20241008-u-boot-topic-g12-do-not-disable-canvas-v1-1-b89659370012@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add support for the Libre Computer aml-s905d3-cc "Solitude" board:
https://libre.computer/products/aml-s905d3-cc/
The Solitude board has a Credit Card form factor, similar to the
the previous "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add support for the Libre Computer aml-a311d-cc "Alta" board:
https://libre.computer/products/aml-a311d-cc/
The Alta board has a Credit Card form factor, similar to the
the prvevious "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=17E07D9D-4D91-53F4-8780-1D91F279C1A5
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 17E07D9D-4D91-53F4-8780-1D91F279C1A5 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-1-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Since the aml-s805-cc works well using EFI, and now the capsule updates
backend has been merged, let's enable the missing configs and add
the required structures to support it.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=B8079027-9B2C-57D4-86AA-CC782ADA598C
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_gxl result binary):
$ eficapsule --guid B8079027-9B2C-57D4-86AA-CC782ADA598C -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240917-u-boot-topic-dynamic-uuid-v2-2-416e39c6e271@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The libretech-ac aka aml-s805x-ac supports mainline U-boot
from a dedicated SPI flash, move the board support into
a dedicated vendor/board subdirectory in order to support
vendor specific customization.
It also aligns with the vendor downstream changes.
Link: https://lore.kernel.org/r/20240917-u-boot-topic-dynamic-uuid-v2-1-416e39c6e271@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
|
|
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22644
- Add fast authentication method for i.MX8M signing.
- Migrate imx8mp-debix-model-a to OF_UPSTREAM.
- Update MAINTAINERS file globs for i.MX6/i.MX8MP DHSOM.
- Improve ELE driver.
- Add i.MX8MP Dummy clk to fix regression.
|
|
Synchronize R-Car R8A779H0 V4M clock tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Synchronize R-Car R8A779G0 V4H clock tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Synchronize R-Car R8A779F0 S4 clock tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Synchronize R-Car R8A779A0 V3U clock tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Synchronize R-Car R8A779H0 V4M PFC tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Synchronize R-Car R8A779G0 V4H PFC tables with Linux 6.10.9,
commit 1611860f184a2c9e74ed593948d43657734a7098 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Implement invalidate_icache_all() by clearing all V bits in
IC and OC. This is done by setting CCR cache control register
ICI and OCI bits.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de
|
|
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This module is a color active matrix LCD module incorporating
Oxide TFT (Thin Film Transistor). It is composed of a color TFT-LCD
panel, driver ICs, a control circuit and power supply circuit, and
a backlight unit. Graphics and texts can be displayed on a 2560×1600
dots panel with (16,777,216) colors by using MIPI DUAL DSI interface,
supplying +3.3V DC supply voltage for TFT-LCD panel driving and
supplying DC supply voltage for LED Backlight.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Implement ganged mode support for the Tegra DSI driver. The DSI host
controller to gang up with is specified via a phandle in the device tree
and the resolved DSI host controller used for the programming of the
ganged-mode registers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
It seems that DECLARE_GLOBAL_DATA_PTR use is not needed and video system
works perfectly fine without it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Obtain USB phy configuration from phy node if such exists
and is enabled. If no, set default values.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Add previously undocumented SKU - AP20H found in LG Optimus 2X (P990).
Correct existing T20_7 name as it's proper name is AP20.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Change %02X to %02x since it always displayed 00 otherwise.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Use board revision detection mechanism to choose correct DTB.
Adjust documentation and build setup accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Use board revision detection mechanism to choose correct DTB.
Adjust documentation and build setup accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Use SPL GPIO functions to simplify RCM hook on HTC One X.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Use PMIC detection mechanism to find correct configuration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
In some cases access to GPIOs is needed so early that DM
is not ready even nearly. These functions are exactly for
this case.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Buildman has difficulties with constructing multi-dtb images, so
let's add a temporary custom recipe for it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Add common logic for dynamic dtb switch and DM reload if board
features multi-dtb support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Tegra 3 has UART-E exposable via SD card slot which may be
handy for debugging. This change only adds funcmux part, to
use UART-E on the device you additionally would need:
- set stdout-path to serial@70006400 (uarte)
- configure sdmmc1_dat3_py4 and sdmmc1_dat2_py5 pinmux for
uarte
- disable or remove sdhci@7800000 node
- enable CONFIG_TEGRA_ENABLE_UARTE in defconfig
- set CFG_SYS_NS16550_COM to NV_PA_APB_UARTE_BASE in device
header
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Convert boards to use text based env. This is the first stage of
conversion, common inclusions should be converted next.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis TK1
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
TegraPT is compatible with EFI part but it can't pass Protective MBR check.
Skip this check if CONFIG_TEGRA_PARTITION is enabled, storage uclass is MMC
and devnum is 0. Note, eMMC on supported devices MUST be aliased to mmc0.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
i.MX8MP SDHC use CLK_IMX8MP_DUMMY clk entry. Without the clk, the bulk
api will return failure.
The correct entry should be replaced with IMX8MP_IPG_ROOT clk in device
tree. This will be done in Kernel device tree and sync to U-Boot in
future:
https://lore.kernel.org/all/20241012025221.1728438-1-peng.fan@oss.nxp.com/
Fixes: 76332fae769 ("mmc: fsl_esdhc_imx: Enable AHB/IPG clk with clk bulk API")
Reported-by: Gilles Talis <gilles.talis@nxp.com>
Tested-by: Gilles TALIS <gilles.talis@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Device tree for this board can be deleted. Device tree location
now points to the freescale/ directory.
Use absolute path to PMIC node entry and its regulators as
device tree in kernel does not provide corresponding labels
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
The SCU API alreay has been converted to return Linux error code,
using SCU error code is not correct here, although SC_ERR_NONE is value
as 0.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Using the PKI tree with SRKs as intermediate CA isn't necessary or even
desirable in some situations (boot time, for example). Add the possibility
to use the "fast authentication" method where the image and CSF are both
signed using the SRK [1, p.63].
[1] https://community.nxp.com/pwmxy87654/attachments/pwmxy87654/imx-processors/202591/1/CST_UG.pdf
Signed-off-by: Brian Ruley <brian.ruley@gehealthcare.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Simplify code and conform to the style guide used in the project by
making the following changes:
* Capitalize global constants
* Use single quotes for multiline strings (except docstrings)
* Fix line width to 79 cols
* Use f-string instead of formatting a regular string or using a
complicated concatenation
* Move common suffix used in keys to a global variable "KEY_NAME"
to reduce the likelihood of typos and making future changes
easier
Signed-off-by: Brian Ruley <brian.ruley@gehealthcare.com>
Cc: Marek Vasut <marex@denx.de>
|
|
Update the MAINTAINERS file glob to cover all of i.MX8MP DHSOM related files.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Update the MAINTAINERS file glob to cover all of i.MX6 DHSOM related files.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
When OSCCA is enabled, FSB fuse shadow (offset 0x8000)
access is disabled for SOC. So update the driver to read fuse
from ELE API. The ELE has supported to read all shadow fuses like
FSB, reuse the table of FSB for the word index used by ELE API.
Add ELE shadow fuse read and write to current ELE fuse driver.
But when LC is OEM closed, the ELE read/write shadow fuse APIs are
forbidden. Reading from any fuse will return error. This causes
problem to u-boot which must read out some fuse no matter whatever LC.
So we have to change back to read from FSB and ELE common fuse read API.
For using ELE shadow read API for development purpose like checking
the ELE shadow fuse write result, user can set env variable
"enable_ele_shd" to y to switch it.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
There is a bug when checking fuse word with redundancy fuse in FSB
table. The redundancy fuses are combined into 4 words, so we can't
directly use word index to do the check, otherwise the high 4 words
will fail to match.
And When calling ELE API, res parameter will pass to ELE API to get ELE
response value for failure. So most of usage does not initialize
this variable and print it after calling ELE API.
However, when ELE API returns failure, we can't ensure this res is
always set because there may be other failure like MU failure.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Add ELE APIs to support read and write shadow fuses
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
