summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/mx6/soc.c
AgeCommit message (Expand)Author
2015-03-13mx6: soc: Switch to cold resetDirk Behme
2015-03-13imx:mx6 remove duplicated includesPeng Fan
2015-02-17ARM: imx6 Add WDOG3 for i.MX6SXPeng Fan
2015-02-17ARM: imx6: disable bandgap self-bias after bootPeng Fan
2015-02-10imx: mx6: Fixed AIPS3 base address issueYe.Li
2014-11-21mx6: thermal: Check cpu temperature via thermal sensorYe.Li
2014-11-12arm: imx: make bmode command work with SPL/U-Boot comboNikita Kiryanov
2014-11-05Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-11-03imx: mx6sl: Set the preclk clock source to OSC 24MhzYe.Li
2014-10-27Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
2014-10-25imx: add missing includesJeroen Hofstee
2014-10-21ARM: i.MX6: include prototype for get_board_rev()Eric Nelson
2014-09-29imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD resetYe.Li
2014-09-22imx: Support i.MX6 High Assurance Boot authenticationNitin Garg
2014-09-09mx6: Fix ECSPI typo in soc_boot_modesNikolay Dimitrov
2014-09-09iMX6: Disable the L2 before chaning the PL310 latencyYe.Li
2014-08-20mx6: add support of multi-processor commandGabriel Huau
2014-07-23mx6: soc: Do not apply the PFD erratum for mx6soloxFabio Estevam
2014-07-10mx6: Add support for the mx6solox variantFabio Estevam
2014-07-09mx6: soc: Update the comments of set_ldo_voltage()Fabio Estevam
2014-02-11mx6: Enable L2 cache supportFabio Estevam
2014-02-11mx6: Distinguish mx6dual from mx6quadFabio Estevam
2014-02-11imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failureAnson Huang
2014-02-11imx6: ensure AHB clock is 132MHz in low freq boot modeAnson Huang
2014-01-17mx6: Revert "mx6: soc: Disable VDDPU regulator"Fabio Estevam
2014-01-02mx6: soc: Disable VDDPU regulatorFabio Estevam
2014-01-02mx6: soc: Add the required LDO ramp up delayFabio Estevam
2014-01-02mx6: soc: Introduce set_ldo_voltage()Fabio Estevam
2014-01-02mx6: soc: Set the VDDSOC at 1.175 VFabio Estevam
2014-01-02mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltagesFabio Estevam
2014-01-02mx6: soc: Staticize set_vddsoc()Fabio Estevam
2013-12-17imx6: fix random hang when download by usbFrank Li
2013-08-31i.MX6: Set and clear the gating bits for Phase Fractional DividersEric Nelson
2013-07-31Merge git://git.denx.de/u-boot-armStefano Babic
2013-07-27mx6: Factor out common HDMI setup codePardeep Kumar Singla
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
2013-04-28imx: Homogenize and fix fuse register definitionsBenoît Thébaudeau
2013-04-22mtd: mxs_nand: Add support for i.MX6Stefan Roese
2013-04-03mx6: Fix get_board_rev() for the mx6 solo caseFabio Estevam
2013-03-07ARM: mx6: use common CPU errata config optionsStephen Warren
2013-02-12mx6: Disable Power Down Bit of watchdogFabio Estevam
2012-11-10mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky
2012-10-15i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson
2012-09-01imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky
2012-07-07No need to define CONFIG_ARCH_CPU_INIT.Fabio Estevam
2012-05-15i.MX6: Add ANATOP regulator initDirk Behme
2012-04-16i.MX6: implement enable_caches()Eric Nelson
2012-03-27mx6: Read silicon revision from registerFabio Estevam
2012-01-16imx: mx6q: add aipstz init for off platform periphJason Liu
2012-01-16i.mx6:imx6q: allign MAC address with burned-in orderingJason Liu
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-02 07:28:02 +0000