| Age | Commit message (Collapse) | Author |
|---|
|
Update key table for stm32mp25 platform.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Fix package IDs for stm32mp25.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
The STM32MP25 revision ID are now defined with the OTP102, this patch
implements this new system.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
|
|
For UART serial boot, the console need to be deactivated to avoid issue
with tools STM32CubeProgrammer.
This patch adds also the missing dependency for CMD_STM32PROG_SERIAL,
to allow the silent and disable console. This avoid to add is on
board level for STM32MP15 (with TARGET_ST_STM32MP15X or
TARGET_ST_STM32MP13X)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Depending on Soc (STM32MP25 vs STM32MP21), the memory map can be
different and it generates a different TLB page table configuration/size.
Increase EARLY_TLB_SIZE to 0x10000 to fix following error message
and panic:
"Insufficient RAM for page table: 0xb000 > 0xa000. Please increase the
size in get_page_table_size()"
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add sdmmc1 temporary fixed clock for stm32mp257f-ev1-u-boot
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add led support, force default state on U-Boot initialization and put on
the Linux heartbeat led = "blue-led" during U-Boot execution.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add "u-boot,mmc-env-partition" property for stm32mp257f-ev1-u-boot.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add support of all the boot mode supported by STM32MP25x family
with information provided by TF-A in backup register
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
This driver is checking the access rights of the different
peripherals connected to the RIFSC bus. If access is denied,
the associated device is not binded.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cover-letter:
Enable OF_UPSTREAM for STM32 and STi platforms
This series is enabling OF_UPSTREAM flag for STM32 MCU's, MPU's and
STi platforms.
For some boards, some defconfig and DT update are needed to keep the
same functional level.
The major impact concerns MPU's platform with introduction of STM32
System Bus.
END
Series-version: 2
Series-changes: 2
- Replace LOG_CATEGORY UCLASS_SIMPLE_BUS by UCLASS_NOP in both
/arch/arm/mach-stm32mp/stm32mp2/rifsc.c and
/arch/arm/mach-stm32mp/stm32mp1/etzpc.c.
- Update board/st/stm32mp1/MAINTAINERS.
- Fix DSI clock ssetting.
|
|
Enable OF_UPSTREAM flag for STM32MP2 platforms.
Add fixed-clock ck_flexgen_08 and ck_icn_ls_mcu until STM32MP25
clock driver will be available.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Due to feature domains management, there is no more
need to maintain the fdt cleanup.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
The STM32 System Bus is an internal bus on which devices are connected.
ETZPC is a peripheral overseeing the firewall bus that configures
and control access to the peripherals connected on it.
For more information on which peripheral is securable, please read
the STM32MP13 or STM32MP15 reference manual.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
This driver is checking the access rights of the different
peripherals connected to the ETZPC bus. If access is denied,
the associated device is not bound.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for STM32MP15 platforms, except for
stm32mp15-odyssey,see following patch :
"configs: stm32: introduce stm32mp15-odyssey_defconfig"
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for STM32MP13 platforms.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for STM32MPF4 platforms.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for STM32F7 platforms.
Use upstream device tree for DSI and LTDC nodes,
As now in upstream DT, in panel@0 node, power-supply property is
present, which is a fixed-regulator, add DM_REGULATOR_FIXED flag
for stm32f769-disco boards.
Set also DEFAULT_FDT_FILE in defconfigs and use it in stm32f746-disco.h
to indicate which FDT file to load (All STM32F7 boards are using this
file).
If something is missing, it must be added in upstream device tree
in linux kernel ("px_clk" for DSI by example).
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for STM32H7 platforms.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Enable OF_UPSTREAM flag for stih410-b2260 board.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
Bryan Brattlof <bb@ti.com> says:
This small series is here to remove some firewalls setup by ROM during
their boot and clean things up for Linux later on. Ideally this would be
a simple call to remove_fwl_configs() however the location of the
firewall is problematic (could potentially crash the core) when we're
currently executing from the memory region protected by the firewall.
So we need to introduce a function which allows us to disable specific
firewall regions and skip others to ensure boot stability.
Link: https://lore.kernel.org/r/20250414-firewalls-v1-0-89090085c08b@ti.com
|
|
ROM will configure a firewall to only allow HSRAM to be touched by the
R5 core. Any outside entity like DMA or the A53s will not have access to
this region. This can be problematic when U-Boot, running on the A53,
loads firmware that runs out of this region.
To simplify things remove the firewall here and let the remote core
firmware place a new firewall themselves if they wish for the memory
region.
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
During boot some firewall regions could contain the R5's code which if
we change the firewalls settings will crash the core. To get around this
issue, define a new function which allows us to specify specific regions
we want unlocked.
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
Add clk and dev data for wakeup uart to enable wakeup
UART as console.
Reported-by: KEERTHY <j-keerthy@ti.com>
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
|
|
Labels are not allowed before declarations. Move the carveout struct
at the beginning and only update 'end' at this point.
This will fix following error:
arch/arm/mach-k3/common_fdt.c: In function 'fdt_fixup_reserved':
arch/arm/mach-k3/common_fdt.c:156:2: error: a label can only be part of a statement and a declaration is not a statement
156 | struct fdt_memory carveout = {
| ^~~~~~
make[1]: *** [scripts/Makefile.build:256: arch/arm/mach-k3/common_fdt.o] Error 1
make: *** [Makefile:1919: arch/arm/mach-k3] Error 2
Fixes: 096aa229a9e ("mach-k3: common_fdt: create a reserved memory node")
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
This makes spl_mmc_boot_mode consistent across am62x, 62a and 62p.
If MMCSD_MODE_EMMCBOOT is returned, FS boot fails since it checks for FS
on the hardware partitions, not the UDA. So to allow FS boot from EMMC,
the function should return MMCSD_MODE_FS instead which allows us to read
from FS on the UDA.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
The bootph-all property in u-boot enables driver initialization prior to
relocation, this is necessary to use the device as boot media.
sdhci0 is the phandle for eMMC on am62a, so this change allows us to use
eMMC as a boot media.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
Jerome Forissier <jerome.forissier@linaro.org> says:
This series introduces threads and uses them to improve the performance
of the USB bus scanning code and to implement background jobs in the
shell via two new commands: 'spawn' and 'wait'.
The threading framework is called 'uthread' and is inspired from the
barebox threads [2]. setjmp() and longjmp() are used to save and
restore contexts, as well as a non-standard extension called initjmp().
This new function is added in several patches, one for each
architecture that supports HAVE_SETJMP. A new symbol is defined:
HAVE_INITJMP. Two tests, one for initjmp() and one for the uthread
scheduling, are added to the lib suite.
After introducing threads and making schedule() and udelay() a thread
re-scheduling point, the USB stack initialization is modified to benefit
from concurrency when UTHREAD is enabled, where uthreads are used in
usb_init() to initialize and scan multiple busses at the same time.
The code was tested on arm64 and arm QEMU with 4 simulated XHCI buses
and some devices. On this platform the USB scan takes 2.2 s instead of
5.6 s. Tested on i.MX93 EVK with two USB hubs, one ethernet adapter and
one webcam on each, "usb start" takes 2.4 s instead of 4.6 s.
Finally, the spawn and wait commands are introduced, allowing the use of
threads from the shell. Tested on the i.MX93 EVK with a spinning HDD
connected to USB1 and the network connected to ENET1. The USB plus DHCP
init sequence "spawn usb start; spawn dhcp; wait" takes 4.5 seconds
instead of 8 seconds for "usb start; dhcp".
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=446674
[2] https://github.com/barebox/barebox/blob/master/common/bthread.c
Link: https://lore.kernel.org/r/20250418141114.2056981-1-jerome.forissier@linaro.org
|
|
Implement initjmp() for Arm. a non-standard extension to setjmp()/
longjmp() allowing to initialize a jump buffer with a function pointer
and a stack pointer. This will be useful to later introduce threads.
With this new function it becomes possible to longjmp() to a particular
function pointer (rather than to a point previously reached during
program execution as is the case with setjmp()), and with a custom stack.
Both things are needed to spin off a new thread. Then the usual
setjmp()/longjmp() pair is enough to save and restore a context, i.e.,
switch thread.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3399 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3328 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The current DT bindings for the rk3576 clock use a different ID than the
one that is supposed to be written to the hardware registers.
Thus, we cannot use directly the id provided in the phandle, but rather
use a lookup table to correctly setup the hardware.
This follows the implementation done in the Linux-Kernel and also
how the rk3588 does this both in the Linux-Kernel as well as U-Boot.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
[adapted from mainline Linux code for u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add clock driver support for Rockchip RK3576 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
[adapted to mainline u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The Rockchip RK3576 is a ARM-based SoC with quad-core Cortex-A72
and quad-core Cortex-A53 including 6TOPS NPU, Mali-G52 MC3, HDMI Out,
DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, UFS,
USB OTG 3.0, Type-C, USB 2.0, PCIe 2.1, SATA 3, Ethernet, SDIO3.0, I2C,
UART, SPI, GPIO and PWM.
Add arch core support for it.
Signed-off-by: Xuhui Lin <xuhui.lin@rock-chips.com>
[adapted for mainline u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Currently the sdram code for arm64 expects CFG_SYS_SDRAM_BASE to be 0.
The ram being in front and the device-area behind it.
The upcoming RK3576 uses a different layout, with the device area
in front the ram, which then also extends past the 4G mark.
Adapt both the generic zone definitions as well as the ATAG parser
to be usable on devices where CFG_SYS_SDRAM_BASE is not 0.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The Radxa E20C is an ultra-compact network computer with a RK3528A SoC
that offers a wide range of networking capabilities.
Features tested on a Radxa E20C v1.104:
- SD-card boot
- eMMC boot
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add a minimal generic RK3528 board that only have eMMC and SD-card
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3528 boards that follow reference board design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Rockchip RK3528 is a ARM-based SoC with quad-core Cortex-A53.
Add initial arch support for the RK3528 SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add a rk3528-u-boot.dtsi extending the basic dts/upstream rk3528.dtsi
with bare minimum nodes to have a booting system from eMMC and SD-card.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add clock driver for RK3528.
Imported from vendor U-Boot linux-6.1-stan-rkr5 tag with minor
adjustments and fixes for mainline.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Add support for reading DRAM size information from PMUGRF os_reg18 reg.
Compared to most Rockchip SoCs the RK3528 use os_reg18 for DRAM info,
instead of os_reg2.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Linux commit 6ee0b9ad3995 ("arm64: dts: rockchip: Add rng node to
RK3588") merged for v6.15-rc1 add a proper rng node to the device tree.
The compatible used differs compared to what U-Boot is currently using.
Replace the old trngv1 compatible with the dts/upstream compatible in
the rng driver and remove the old rng node compatible override from SoC
u-boot.dtsi to keep rng working after the driver change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Linux commit afeccc408496 ("arm64: dts: rockchip: add DT entry for RNG
to RK356x") merged for v6.12-rc1 add a proper rng node to the SoC DT.
Remove the rng node from SoC u-boot.dtsi now that the rng driver support
the compatible used in dts/upstream DT. Ensure the rng node is enabled
to support rng on RK3566 variants.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
BOARD_LATE_INIT is already selected by ROCKCHIP_RK3588 so there is no
need to select it under any board target config.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
BOARD_LATE_INIT is already selected by ROCKCHIP_RK3568 so there is no
need to select it under any board target config.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Ensure rk3588_common.h can be used by boards directly by defining a
blank ROCKCHIP_DEVICE_SETTINGS unless it already is defined.
Add a default SYS_CONFIG_NAME to include rk3588_common.h unless a board
target overrides it in its board Kconfig.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Ensure rk3568_common.h can be used by boards directly by defining a
blank ROCKCHIP_DEVICE_SETTINGS unless it already is defined.
Add a default SYS_CONFIG_NAME to include rk3568_common.h unless a board
target overrides it in its board Kconfig.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Define constants for hptimer reg names and use them instead of magic
numbers in rockchip_stimer_init().
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The Rockchip RK3576 SoC uses a different DRAM base address, 0x40000000,
compared to prior SoCs.
Add default options that should work when 0x40000000 is used as DRAM
base address. Use same offsets as before, just below 64 MiB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
