summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-10-29ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/HAdam Ford
Now that TARGET_BEACON_RZG2M can handle all the work that was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H, remove them since they just create more duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2MAdam Ford
The three different boards share the same board file and only differ in terms of which SoC is being used. By enabling FIT on TARGET_BEACON_RZG2M, it can support all three boards and elimate duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-28Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- mvebu: Fix usage of BIN header arguments (Pali) - mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali) - mvebu: nandpagesize support for kwbimage v1 (Pali)
2021-10-28arm: mvebu: Fix comments about kwbimage structuresPali Rohár
kwbimage v1 is used on more SoCs. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Update name of kwbimage v1 field at offset 0x2-0x3Pali Rohár
At this offset is stored nand page size. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Remove dummy BIN header arguments for SPL binaryPali Rohár
U-Boot SPL binary does not read BIN header arguments, so passing some dummy values 0000005b and 00000068 has no effect for U-Boot SPL code. Probably these two values comes from old Marvell DDR training code which was separated from U-Boot and used it for some configuration. Seems that two 32-bit values were specified here to ensure SPL code alignment to 128-bit boundary as it is required e.g. for A370 or AXP processors. Main kwbimage header is 64-byte long which is aligned to 128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header arguments is stored in 32-bit number. So for alignment to 128-bit boundary is needed 64-bit padding which exactly these two 32-bit dummy arguments provided. Now when mkimage correctly aligns start of executable code in BIN header to 128-bit boundary, there is no requirement to put dummy argument values into kwbimage. So remove them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Add documentation for save_boot_params() functionPali Rohár
Important detail is availability of kwbimage BIN header arguments passed via r0 and r1 registers by BootROM. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-25arm: spl: prepare for jumping to OPTEERicardo Salveti
Make sure to (if applicable) flush the D-cache, invalidate I-cache, and disable MMU and caches before jumping to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-25Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Add and enable watchdog driver - Prepare for SYSRESET driven AXP poweroff - Prepare for SoCs without MMC2 - Some fixes for extending SPL (SPL-DM for RISC-V) - Some preparations for proper VBUS management - Fix secure monitor move
2021-10-25sunxi: only include alias for eMMC when mmc2 usedIcenowy Zheng
Some Allwinner SoCs (e.g. R329) doesn't have a MMC2 controller at all, and on boards that we do not utilize MMC2, the alias for it is just useless. Only include the alias when we specify CONFIG_MMC_SUNXI_EXTRA_SLOT to 2. Signed-off-by: Icenowy Zheng <icenowy@sipeed.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25sunxi: dts: H616: Enable the watchdogSamuel Holland
For some reason, the watchdog was disabled in the H616 device tree. Most likely this is a copy-paste from the H6 device tree: the H6 watchdog is disabled because it is broken in some chips. However, there is no evidence of issues with the H616 watchdog. Enable the watchdog node so it can be used by the driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-25sunxi: Enable watchdog timer support by defaultSamuel Holland
A watchdog helps recover from hangs or failure to boot an OS. It can also be used by the sysreset framework to intentionally reset the system. Now that a driver is available, let's enable this functionality on sunxi boards. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-25sunxi: SPL SPI: Allow larger SPLAndre Przywara
The more recent Allwinner SoCs BootROMs can actually load SPL images larger than 32KB. We use this on the H616 to fit the extra code needed for the PMIC into the image, and have provisions in board.c to respect that larger SPL size when booting from MMC. However the sunxi SPL SPI loader has a hardcoded load offset of 32KB, which will fail on the H616. To fix this, use the same algorithm we use for MMC: if the SPL size is smaller than 32KB, we use 32KB, otherwise we expect the U-Boot payload directly after the SPL code. This prepares for SPI booting with larger SPLs like on the H616. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-10-25sunxi: Select SPL_SEPARATE_BSSSamuel Holland
sunxi-common.h defines CONFIG_SPL_BSS_START_ADDR to put SPL's BSS in DRAM. Due to this, we must select SPL_SEPARATE_BSS, or else SPL will attempt to load its DTB from the wrong address (after BSS in DRAM). This change fixes booting with SPL_OF_CONTROL=y. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21sandbox: provide /chosen/boot-hartid propertyHeinrich Schuchardt
On RISC-V the sandbox must provide the /chosen/boot-hartid in the devicetree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21mx7ulp: add getting a board serial numberRicardo Salveti
Get Unique ID of SoC iMX7ULP, using the logic described in Fusemap (IMX7ULPRMB2_Rev0_Fusemap) attached in the i.MX 7ULP APRM [1]. [1] https://www.nxp.com/docs/en/reference-manual/IMX7ULPRMB2.pdf Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-21arm: dts: imx8mp: Delete default clocks for clock controller nodeYe Li
Since SPL has initialized clocks for bus and core. We don't need to set the default clocks for clock controller node. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Teresa Remmet <t.remmet@phytec.de> Tested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2021-10-21arm: dts: imx8mp-evk: Enable the EQoS ethernet portYe Li
i.MX8MP EVK has two ethernet ports. Add relevant nodes and properties for EQoS port to the EVK DTS file. In -u-boot.dtsi, change the u-boot eqos compatible string, add PHY reset gpio and remove assigned clocks as not supported in CCF. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21arm: mach-imx: Allow to build mac.c for EQoS driverYe Li
i.MX8MP has one DWC EQoS controller, so allow to build mac.c when only this driver is enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-10-21arm: mach-imx: Update MAC fuse for i.MX8MPYe Li
i.MX8MP has two ENET controllers, have to update the function to enable loading two MAC addresses. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: Add missing "if SPL"Tom Rini
We can only select SPL_SKIP_LOWLEVEL_INIT if SPL is enabled, otherwise we get a warning about unmet dependencies on platforms that don't use SPL. Fixes: cf47a8cf8f7e ("arm: mvebu: Select SPL_SKIP_LOWLEVEL_INIT on ARMADA_32BIT") Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_omnia: Move CONFIG_SPL_DRIVERS_MISC to KconfigMarek Behún
Instead of declaring CONFIG_SPL_DRIVERS_MISC in board config header, select it in Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21arm: mvebu: turris_omnia: Move SPL's SYS_MALLOC_SIMPLE to KconfigMarek Behún
Instead of declaring CONFIG_SYS_MALLOC_SIMPLE dependant on CONFIG_SPL_BUILD in board config header, select CONFIG_SPL_SYS_MALLOC_SIMPLE in Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21x86: Show some EFI info with the bdinfo commandSimon Glass
It is useful to see some basic EFI info with the command as it forms part of the information about a board. Add a hook for this and show the table address as a start. While here, fix an invalid cast in setup_efi_info(). Note that this function is using a data structure defined by Linux so we cannot change it. Also note that ulong is used since this is the standard in U-Boot (>6k uses), despite there being quite a bit of the more verbose uintptr_t (930 uses). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21x86: Create a new header for EFISimon Glass
The setup routines are called from zimage but don't really belong in the zimage header. Add a new EFI header to house these. Add comments so it is clear what the functions do. Note that these functions are x86-specific. The zimage business is not used on other architectures. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21x86: Keep symbol information in u-boot ELF fileSimon Glass
At present this information is stripped when linking. It is useful to keep it around. Strip it from the .efi files instead. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20colibri-imx6ull: add emmc variantMax Krummenacher
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20imx8mm-evk: Generate a single bootable flash.bin againFabio Estevam
After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-20board: phytec: imx8mm-phycore: Switch to binmanTeresa Remmet
Use binman for image creation. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20board: phytec: phycore-imx8mm: Add SPI-NOR flash supportTeresa Remmet
Adds SPI-NOR flash support to erase, read and write in bootloader. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20arm: dts: phycore-imx8mm: Fix propertyTeresa Remmet
Fix misspelled property "stdout-path". Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entryTeresa Remmet
Add missing pinctrl entry in spl. Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2021-10-20verdin-imx8mm: fix watchdog pinctrl issueMarcel Ziswiler
Finally, found the root cause of the issue already once mentioned back here [2] which caused the following error message during boot: imx_wdt watchdog@30280000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 Turns out while the watchdog node itself was already u-boot,dm-spl its pinctrl node was not which caused it to be unavailable at that early stage. Note that any and all other boards I checked also seem to be missing this. However, I can't judge whether or not they might indeed need a similar fix or not. [2] https://marc.info/?l=u-boot&m=161786572422973 Fixes: commit d304e7ace3a6 ("ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: enable sleep_moci outputMax Krummenacher
This powers some peripherals on the carrier board e.g. the USB hub. Related-to: ELB-3206 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20arm64: dts: imx8mm-verdin-u-boot.dtsi: alphabetically re-orderMarcel Ziswiler
Alphabetically re-order nodes and properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20ARM: dts: imx8mm-verdin: prepare for dek blob encapsulationMarcel Ziswiler
Prepare for DEK blob encapsulation support through "dek_blob" command. On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob for encrypted boot. The DEK blob is encapsulated by OP-TEE through a trusted application call. U-boot sends and receives the DEK and the DEK blob binaries through OP-TEE dynamic shared memory. To enable the DEK blob encapsulation, add to the defconfig: CONFIG_SECURE_BOOT=y CONFIG_FAT_WRITE=y CONFIG_CMD_DEKBLOB=y Taken from NXP's commit 56d2050f4028 ("imx8m: Add DEK blob encapsulation for imx8m"). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20imx8m: clean-up kconfig indentationMarcel Ziswiler
Replace spurious spaces with proper tabs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-20riscv: Avoid io read/write cause wrong resultNick Hu
io read/write may cause wrong result because they may read/write data from/to register instead of memory. Add 'volatile' to avoid it. Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-18board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boardsIlias Apalodimas
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18riscv: Remove OF_PRIOR_STAGE from RISC-V boardsIlias Apalodimas
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-17Merge tag 'u-boot-rockchip-20211015' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix for Rockchip mmc HS400 mode; - Fix for px30 board Odroid Go; - rockchip_sfc update; - rk3568 clk update; - doc fix;
2021-10-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegraTom Rini
On merge, fixup order of fdtdec_add_reserved_memory parameters in arch/arm/cpu/armv8/fsl-layerscape/soc.c Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15Convert CONFIG_USB_EHCI_IS_TDI to KconfigMarek Behún
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 00:50:20 +0000